Add 'bootloadHID' flash target (#5587) * Add 'bootloadHID' flash target * Prep for flash target * Add :flash support * Align bootloader wait messages Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update template to suggest use of :flash
Add Zadig 101 to docs (#6585) * Add Zadig 101 to docs * Add USBasp bootloader name * Add links to the page * Note the usual VIDs and PIDs for the bootloaders * Add "List All Devices" note, just in case * Talk about keyboard-specific bootloader procedures * Send users to the new page in "Unknown Device for DFU Bootloader" section * Halfkay bootloaders are also an exception here
Add Soft Serial Speed to Diverge3 keyboard config for compatibility (#5076)
Added 4by3 keyboard (#6547) * Added 4by3 keyboard * Added DEVICE_VER and DESCRIPTION * Removed F_CPU, F_USB, ARCH, and OPT_DEFS * Add 3 new LAYOUT macros for orientations and fixes * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Added comments to 4by3 and changed info.json * Update keyboards/4by3/4by3.h Co-Authored-By: fauxpark <fauxpark@gmail.com>
Align flashing behaviour of dfu-util (#6578) * Align flashing retry logic of dfu-util * Align bootloader wait messages Co-Authored-By: Drashna Jaelre <drashna@live.com>
Relocate pca9555 driver to core (#6563) * Move pca9555 files to central location * Get pca9555 boards compiling * Slight alignment of rules.mk
Reduce compile size to fix various Travis CI errors (#6426) Due to feature creep
Fixup Bootmagic code (#6386)
[Keyboard] Fix RGB_TOG cycle for Massdrop CTRL default keymap (#6056) This includes the modifier keys in "keys only" mode, bringing the keymap closer to what the off-the-shelf firmware does.
[Docs] Update how_keyboards_work.md (#6528) * Update how_keyboards_work.md bridged the gap between scancodes and keycodes, the doc didn't make the distinction and was ambiguous. * Update docs/how_keyboards_work.md Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update docs/how_keyboards_work.md fix typo Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
[Keyboard] Update NovelPad (#6559) * Update NovelPad * Lowercase readme * Update keyboards/novelpad/keymaps/default/keymap.c Co-Authored-By: Joel Challis <git@zvecr.com> * Remove default F_CPU, F_USB, ARCH, and OPT_DEFS - covered in mcu_selection.mk
[Keyboard] new keyboard "angel17" (#6542) * add angel17 keyboard * fix rules.mk * change BOOTLOADER * set LAYOUT_numpad_5x4 * Update keyboards/angel17/rules.mk Co-Authored-By: Drashna Jaelre <drashna@live.com> * fix LAYOUTS = numpad_5x4 * update info.json
[Keyboard] Updates to ZSA boards (#6513) * Update Layer functions to use layer_state_t in ZSA Boards * Update Music Mask for ZSA boards Fixes an issue with the board getting stuck on Adjust layer when activating music mode * Add Support for SMART LED Toggle to Planck EZ * Add support for SMART LED toggle in Ergodox EZ * Ifdef swiss cheeze for Oryx Configurator * Documentation and updates * Add Oryx Keymap * Add option to configure the layers for the Layer Indicator * Update keymap with better examples * Make sure eeprom is initialized before reading from it * Force flush of LED matrix when suspending board This fixes an issue where the LEDs don't fully clear sometimes when the host system goes to sleep * Enable RGB Sleeping by default * Add clarification about planck ez led layer config
AVR GPIO macro defines more readable (#5937) * A little easier to read the definition of the GPIO control macro for AVR. No change in build result. * Changed to not use GNU statement expression extension. No change in build result. * Modified split_common/serial.c to use qmk_firmware standard GPIO control macro. No change in build result. * fix PE6 -> E6 * remove some space * add some comment to config_common.h * Changed split_common/serial.c to use a newer version of qmk_firmware standard GPIO control macro.
Additional changes for Layer State typedef compatibility (#5906) * Additional changes for Layer State typedef compatibility * Replace biton32 with get_highest_layer in docs * Change additional layer structure code * Fix uGFX reference issue * Remove dynamic_keymap check * Where did all these extra spaces come from Co-Authored-By: fauxpark <fauxpark@gmail.com>
Added keycodes for swapping and unswapping the Control and OS keys (#6110) * Add MAGIC_SWAP_CONTROL_LGUI and MAGIC_UNSWAP_CONTROL_LGUI keycodes Key codes to swap and unswap the control and windows/cmd keys * Fix issues with pull request #6110 Renamed swap/unswap lctl and lgui key codes, added key codes to swap/unswap rctl and rgui, and moved new bool inside keycode_config.h struct to the end * Move new keycodes to the end of the enum (#6110) * add cases for swapped control and OS keys to mod_config (#6110) * Add new keycodes to feature_bootmagic.md (#6110) * Add R+L swap codes to keep in parity with AG_* codes * Extend Magic range check to include new magic codes * Update audio docs * Combine 2 byte ranges into 1 word for EECONFG Fix names for Keymap config EEPROM * Update docs/feature_bootmagic.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/feature_bootmagic.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/feature_bootmagic.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/feature_bootmagic.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
[Keyboard] Tweak RGB Matrix timing for ZSA Boards (#6422) * Optimize RGB Matrix rendering for Ergodox EZ * Optimize RGB Matrix rendering for Planck EZ * Update keyboards/planck/ez/config.h Co-Authored-By: Joel Challis <git@zvecr.com>
Remove superfluous JTAG disable code (#6445) * Remove superfluous JTAG disable code * 32A has differently named register * Accidentally some operators * 32A also has different JTAG pins * Wrap disable_jtag() in an ifndef * Document this new define * Rename the define, it conflicts with a LUFA thing Also, move the ifndef wrapping to the call in keyboard_setup()
[Keymap] dumbpad updates, new keymap (#6481) * removed some debug prints * removed unnecessary files, tweaked some things * rotary encoder button now connected into column 0, row 3 * tweaked keymap and moved encoder control into keymap * tweaks * added test keymap * updated some things to make it easier to work with QMK configurator * updates after merging latest master in * fixed a few things * removed test keymap and all related #ifdefs * changed some dumbpad default keys, added KC_LOCK * added image to readme * added link to PCB github repo * moved lock key to the rotary encoder pushbutton * making suggested changes from @fauxpark in https://github.com/qmk/qmk_firmware/pull/6452 * adding bootmagic lite since i'm lazy and haven't soldered on the reset button... * renamed to * using 7 underscores for KC_TRNS * adding my layout (default is for wife) * updated my own layout, tweaked default keymap to use cleaner switch for encoder control * removed commented out import from imchipwood keymap, removed unnecessary comment from default layout * added LED layer control * flash the layer indicator LEDs at startup * change layer_state_set_user to layer_state_set_kb Co-Authored-By: Joel Challis <git@zvecr.com> * in layer_state_set_kb, return layer_state_set_user Co-Authored-By: Drashna Jaelre <drashna@live.com> * remove include of upper level config.h, add pragma once Co-Authored-By: Drashna Jaelre <drashna@live.com> * changing default keymap slightly, added config.h for default layout * change _delay_ms to wait_ms * replaced locking numlock with numlock * Update keyboards/dumbpad/dumbpad.c change `keyboard_pre_init_user` to `keyboard_pre_init_kb` Co-Authored-By: Joel Challis <git@zvecr.com> * Update keyboards/dumbpad/dumbpad.c adding `keyboard_pre_init_user()` to `keyboard_pre_init_kb()` Co-Authored-By: Joel Challis <git@zvecr.com> * fixed some comments about the layer key (MO to TT) and the SUB layer rotary encoder control
[Keyboard] PCB Ruler updates (#6584) * Move default keymap's rules to keyboard level * Concatenate the two sets of rules This sets CONSOLE_ENABLE to no, which was being set at the keymap level. * Wrap the USB Device Description in quotes Some preventative maintenance. The firmware for the_ruler can't be compiled without this change if `CONSOLE_ENABLE = yes` because this string has a comma, which gets picked up as two arguments by the Command code, instead of one as it should be. * Linting - remove firmware size impacts - remove trailing white space - visual alignment of rules * Use QMK's pre-loaded default rules for atmega32u4 * Update readme - markdown formatting - update Hardware Availability link (Maple Computing's site has disappeared) - update Docs links * Update header files to use #pragma once