~ruther/qmk_firmware

qmk_firmware/keyboards/enviousdesign/60f/readme.md -rw-r--r-- 1.6 KiB
6e7c1c90 — Rutherther fix: remap ROW3 in kyria because of broken pin by static electricity discharge 2 months ago

#EnvKB 60F

Image of the EnvKB 60F PCB

A low cost Standard 60% Design which takes inspiration from the CFTKB Mysterium.

  • Keyboard Maintainer: Envious-Data
  • Hardware Supported: EnvKB 60F (Pi Pico)
  • Hardware Availability: GitHub

Make example for this keyboard (after setting up your build environment):

make enviousdesign/60f:default

Flashing example for this keyboard:

make enviousdesign/60f:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

#Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
  • Physical reset: Hold down the BOOTSEL button on the Pi Pico, then either plug the board in or press the RESET button.
  • Keycode in layout: Press the key mapped to QK_BOOT. In the pre-supplied keymaps it is on the second layer, replacing the Tab key.

After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named RPI-RP2. If the CLI is unable to find this device, the compiled .uf2 file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.

Do not follow this link