~ruther/qmk_firmware

ref: 1e304433e57d1e5e6bd6c157c2af3655b4ee73ef qmk_firmware/docs/apa102_driver.md -rw-r--r-- 1.8 KiB
1e304433 — Joe Scotto [Keyboard] Add Scotto108 handwired keyboard (#22720) 1 year, 10 months ago

#APA102 Driver :id=apa102-driver

This driver provides support for APA102 addressable RGB LEDs. They are similar to the WS2812 LEDs, but have increased data and refresh rates.

#Usage :id=usage

In most cases, the APA102 driver code is automatically included if you are using either the RGBLight or RGB Matrix feature with the apa102 driver set, and you would use those APIs instead.

However, if you need to use the driver standalone, add the following to your rules.mk:

APA102_DRIVER_REQUIRED = yes

You can then call the APA102 API by including apa102.h in your code.

#Basic Configuration :id=basic-configuration

Add the following to your config.h:

Define Default Description
APA102_DI_PIN Not defined The GPIO pin connected to the DI pin of the first LED in the chain
APA102_CI_PIN Not defined The GPIO pin connected to the CI pin of the first LED in the chain
APA102_DEFAULT_BRIGHTNESS 31 The default global brightness level of the LEDs, from 0 to 31

#API :id=api

#void apa102_setleds(rgb_led_t *start_led, uint16_t num_leds)

Send RGB data to the APA102 LED chain.

#Arguments :id=api-apa102-setleds-arguments
  • rgb_led_t *start_led
    A pointer to the LED array.
  • uint16_t num_leds
    The length of the LED array.

#void apa102_set_brightness(uint8_t brightness)

Set the global brightness.

#Arguments :id=api-apa102-set-brightness-arguments
  • uint8_t brightness
    The brightness level to set, from 0 to 31.