mattly goes windows (#9677)
* mattly's userspace and iris
* [Keymap] mattly's windows overlays
* biton32->get_highest_layer
* few more small tweaks
Add keyboard Punk75 (#9731)
* start of punk75 keyboard
* preliminary code for the punk75 keyboard
* readme
* changes to work with USBasp
* changed cols and added configurable led
* set LED's pin as output
* changed led to new port and added rotary encoders
* added code for rotary encoders
* fixed col pins
* fixed encoder orientation
* added delay for tap_code so encoder works as intended
* added preliminary keymap for mine
* personal keymap for punk75
* personal keymap for punk75
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* fixed image
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Add via support for rart75 (#9746)
* Update info.json
* Create rules.mk
* Create keymap.c
Update rartpad via keymap (#9747)
fixed alt text for images. (#9781)
format code according to conventions [skip ci]
Update onekey proton_c readme (#9758)
A3 won't work. The code says A1 and A2 and it works. prints out an "a"
ensure hhkb runs matrix_init_quantum (#9629)
[Docs] Update ISP Guide (#9748)
* [Doc] Update ISP Guide
Correct the fuses for Caterina, and make the `:production` command more obvious.
* fix casing before fauxpark catches it
[Docs] Japanese translation of docs/feature_debounce_type.md (#9524)
* add feature_debounce_type.md translation
* update based on comment
* update based on comment
Write firmware for the Ferris keyboard (#9634)
* Write firmware for the Ferris keyboard
Took inspiration from the gergoplex and the ergodox_ez firmware for the
split matrix with io_expander on the right hand.
Cleaned up a lot of bit fiddling on the mcu side by taking inspiration
from the `split_custom` in quantum.
Still bit fiddling on the mcp side as it is particularly natural to do
so with the abstractions provided by the i2c protocol. Would be good to
clean that up and abstract away the wiring from the generic i2c code in
a similar fashion as quantum and the mcp side behave.
One improvement over the ergodox_ez and the gergoplex firmwares is that
the wiring is straight forward as opposed to swapping rows and columns
in two different places that end up cancelling out for some reason.
At this stage, I have flashed this firmware to a board and have verified
that all keys are behaving as intended by shorting pins.
I still have to solder in some switches and test that everything works
correctly at normal typing speeds, but I don't expect any major issues
given I'm building up on previous effort, including the debouncing code
from the ergodox_ez.
* Remove rotation from info.json and label the keys as per default keymap
* Comply with minor review feedback points
* Use CUSTOM_MATRIX=lite to remove boilerplate
* Update keyboards/handwired/ferris/info.json
Didn't play nicely in the configurator
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove MIDI_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove FAUXCLICKY_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Prefer wait_ms over _delay_ms
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused includeh
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use dprint over print and remove include for print.h
* Remove all unused includes
* Remove unused code
* Cleanups thanks to code review
* Move more personal settings from the ferris config to the default keymap config
These setting happen to be unused in the default keymap at the moment,
as it has only one layer with no homerow modifiers and no mouse key; but
I would like to keep it there for two reasons:
* It can serve as an example to people creating their own keymap
* I plan to design a more usable default keymap that uses these features
once this PR which adds the Ferris keyboard is merged.
* Consolidate mcp logic inside matrix.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Add timber wolf keyboard (#9353)
* added timber wolf keyboard
* removed subfolders
* fixed keymap names
* fixed layout macro references
* swapped c6 and c7 functions
* Update keyboards/metamechs/timberwolf/config.h
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* Update readme.md
* re-updating readme
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
[keyboard] added Adelheid (#9734)
* readded adelheid files
* reworked keymaps
- moved my personal keymap to a new folder
- added a new default keymap
* removed unnecessary backslash
* reenabled command rule
* bumped device number
* fixed layout for configurator
* applied suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Add Alter Keyboard (#9579)
* Create Alter folder
* Revert "Create Alter folder"
This reverts commit 361103b821dbb22957b66cdedb0d11f996def71c.
* Add Alter keyboard
* Fixed keymap.c
* Fixed another issue on the keymap.c
* Updated the files based on the comments
* Edited default keymap and enabled rgbanimations on config.h
* Updated the info.json
[Keyboard] add rart75 (#9649)
* Create config.h
* Create info.json
* Create rart75.c
* Create rart75.h
* Create readme.md
* Create rules.mk
* Create keymap.c
* Create keymap.c
* Update keymap.c
* Update info.json
* Update info.json
* Update info.json
* Update readme.md
* Update config.h
* Update rules.mk
* Update readme.md
* Update readme.md
VIA Support: Skog Lite (#9686)
* via support for the skog lite
* some code cleanup before submission
* Update keyboards/percent/skog_lite/keymaps/via/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/percent/skog_lite/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
[keymap] Add VIA support for Hub16 (#9638)
* fix encoder switch not staying depressed
* add via support
* change default keymap
* change VID-PID
* remove LTO
* fix hold bug keeping debouncing