Added 4by3 keyboard (#6547)
* Added 4by3 keyboard
* Added DEVICE_VER and DESCRIPTION
* Removed F_CPU, F_USB, ARCH, and OPT_DEFS
* Add 3 new LAYOUT macros for orientations and fixes
* Apply suggestions from code review
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Added comments to 4by3 and changed info.json
* Update keyboards/4by3/4by3.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Align flashing behaviour of dfu-util (#6578)
* Align flashing retry logic of dfu-util
* Align bootloader wait messages
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Relocate pca9555 driver to core (#6563)
* Move pca9555 files to central location
* Get pca9555 boards compiling
* Slight alignment of rules.mk
Reduce compile size to fix various Travis CI errors (#6426)
Due to feature creep
Fixup Bootmagic code (#6386)
[Keyboard] Fix RGB_TOG cycle for Massdrop CTRL default keymap (#6056)
This includes the modifier keys in "keys only" mode, bringing the keymap
closer to what the off-the-shelf firmware does.
[Docs] Update how_keyboards_work.md (#6528)
* Update how_keyboards_work.md
bridged the gap between scancodes and keycodes, the doc didn't make the distinction and was ambiguous.
* Update docs/how_keyboards_work.md
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update docs/how_keyboards_work.md
fix typo
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
[Keyboard] Update NovelPad (#6559)
* Update NovelPad
* Lowercase readme
* Update keyboards/novelpad/keymaps/default/keymap.c
Co-Authored-By: Joel Challis <git@zvecr.com>
* Remove default F_CPU, F_USB, ARCH, and OPT_DEFS - covered in mcu_selection.mk
[Keyboard] new keyboard "angel17" (#6542)
* add angel17 keyboard
* fix rules.mk
* change BOOTLOADER
* set LAYOUT_numpad_5x4
* Update keyboards/angel17/rules.mk
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* fix LAYOUTS = numpad_5x4
* update info.json
[Keyboard] Updates to ZSA boards (#6513)
* Update Layer functions to use layer_state_t in ZSA Boards
* Update Music Mask for ZSA boards
Fixes an issue with the board getting stuck on Adjust layer when activating music mode
* Add Support for SMART LED Toggle to Planck EZ
* Add support for SMART LED toggle in Ergodox EZ
* Ifdef swiss cheeze for Oryx Configurator
* Documentation and updates
* Add Oryx Keymap
* Add option to configure the layers for the Layer Indicator
* Update keymap with better examples
* Make sure eeprom is initialized before reading from it
* Force flush of LED matrix when suspending board
This fixes an issue where the LEDs don't fully clear sometimes when the host system goes to sleep
* Enable RGB Sleeping by default
* Add clarification about planck ez led layer config
AVR GPIO macro defines more readable (#5937)
* A little easier to read the definition of the GPIO control macro for AVR.
No change in build result.
* Changed to not use GNU statement expression extension.
No change in build result.
* Modified split_common/serial.c to use qmk_firmware standard GPIO control macro.
No change in build result.
* fix PE6 -> E6
* remove some space
* add some comment to config_common.h
* Changed split_common/serial.c to use a newer version of qmk_firmware standard GPIO control macro.
Additional changes for Layer State typedef compatibility (#5906)
* Additional changes for Layer State typedef compatibility
* Replace biton32 with get_highest_layer in docs
* Change additional layer structure code
* Fix uGFX reference issue
* Remove dynamic_keymap check
* Where did all these extra spaces come from
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Added keycodes for swapping and unswapping the Control and OS keys (#6110)
* Add MAGIC_SWAP_CONTROL_LGUI and MAGIC_UNSWAP_CONTROL_LGUI keycodes
Key codes to swap and unswap the control and windows/cmd keys
* Fix issues with pull request #6110
Renamed swap/unswap lctl and lgui key codes, added key codes to swap/unswap rctl and rgui, and moved new bool inside keycode_config.h struct to the end
* Move new keycodes to the end of the enum (#6110)
* add cases for swapped control and OS keys to mod_config (#6110)
* Add new keycodes to feature_bootmagic.md (#6110)
* Add R+L swap codes to keep in parity with AG_* codes
* Extend Magic range check to include new magic codes
* Update audio docs
* Combine 2 byte ranges into 1 word for EECONFG
Fix names for Keymap config EEPROM
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
[Keyboard] Tweak RGB Matrix timing for ZSA Boards (#6422)
* Optimize RGB Matrix rendering for Ergodox EZ
* Optimize RGB Matrix rendering for Planck EZ
* Update keyboards/planck/ez/config.h
Co-Authored-By: Joel Challis <git@zvecr.com>
Remove superfluous JTAG disable code (#6445)
* Remove superfluous JTAG disable code
* 32A has differently named register
* Accidentally some operators
* 32A also has different JTAG pins
* Wrap disable_jtag() in an ifndef
* Document this new define
* Rename the define, it conflicts with a LUFA thing
Also, move the ifndef wrapping to the call in keyboard_setup()
[Keymap] dumbpad updates, new keymap (#6481)
* removed some debug prints
* removed unnecessary files, tweaked some things
* rotary encoder button now connected into column 0, row 3
* tweaked keymap and moved encoder control into keymap
* tweaks
* added test keymap
* updated some things to make it easier to work with QMK configurator
* updates after merging latest master in
* fixed a few things
* removed test keymap and all related #ifdefs
* changed some dumbpad default keys, added KC_LOCK
* added image to readme
* added link to PCB github repo
* moved lock key to the rotary encoder pushbutton
* making suggested changes from @fauxpark in https://github.com/qmk/qmk_firmware/pull/6452
* adding bootmagic lite since i'm lazy and haven't soldered on the reset button...
* renamed to
* using 7 underscores for KC_TRNS
* adding my layout (default is for wife)
* updated my own layout, tweaked default keymap to use cleaner switch for encoder control
* removed commented out import from imchipwood keymap, removed unnecessary comment from default layout
* added LED layer control
* flash the layer indicator LEDs at startup
* change layer_state_set_user to layer_state_set_kb
Co-Authored-By: Joel Challis <git@zvecr.com>
* in layer_state_set_kb, return layer_state_set_user
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* remove include of upper level config.h, add pragma once
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* changing default keymap slightly, added config.h for default layout
* change _delay_ms to wait_ms
* replaced locking numlock with numlock
* Update keyboards/dumbpad/dumbpad.c
change `keyboard_pre_init_user` to `keyboard_pre_init_kb`
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/dumbpad/dumbpad.c
adding `keyboard_pre_init_user()` to `keyboard_pre_init_kb()`
Co-Authored-By: Joel Challis <git@zvecr.com>
* fixed some comments about the layer key (MO to TT) and the SUB layer rotary encoder control
[Keyboard] PCB Ruler updates (#6584)
* Move default keymap's rules to keyboard level
* Concatenate the two sets of rules
This sets CONSOLE_ENABLE to no, which was being set at the keymap level.
* Wrap the USB Device Description in quotes
Some preventative maintenance. The firmware for the_ruler can't be compiled without this change if `CONSOLE_ENABLE = yes` because this string has a comma, which gets picked up as two arguments by the Command code, instead of one as it should be.
* Linting
- remove firmware size impacts
- remove trailing white space
- visual alignment of rules
* Use QMK's pre-loaded default rules for atmega32u4
* Update readme
- markdown formatting
- update Hardware Availability link (Maple Computing's site has disappeared)
- update Docs links
* Update header files to use #pragma once
[Keymap] Add velocikey, move reset and align layout (#6569)
Implement NUMLOCK indicator light for XD96 (#6581)