15 files changed, 0 insertions(+), 291 deletions(-)

D keyboards/chibios_test/teensy_lc_onekey/Makefile.3.0
D keyboards/chibios_test/teensy_lc_onekey/Makefile.3.2
D keyboards/clueboard/66/keymaps/bloodlvst/Makefile
D keyboards/clueboard/66/keymaps/mouse_keys/Makefile
D keyboards/clueboard/66/keymaps/mrscooty/Makefile
D keyboards/clueboard/66/keymaps/serubin/Makefile
D keyboards/clueboard/66/keymaps/tetris/Makefile
D keyboards/clueboard/66/keymaps/xyverz/Makefile
D keyboards/nyquist/keymaps/pitty/Makefile
M keyboards/orthodox/rev3/rules.mk
D keyboards/planck/keymaps/fabian/Makefile
D keyboards/planck/keymaps/matrixman/Makefile
D keyboards/xd75/keymaps/atomic_style/Makefile
D keyboards/xd75/keymaps/kim-kim-xd73/Makefile
D keyboards/xd75/keymaps/kim-kim/Makefile

@@ 1,77 0,0 @@
-# Target file name (without extension).
-PROJECT = ch
-
-# Directory common source files exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MK20DX128
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x5
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_3
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	    # USB Nkey Rollover
-
-include $(TMK_DIR)/tool/chibios/common.mk
-include $(TMK_DIR)/tool/chibios/chibios.mk

@@ 1,77 0,0 @@
-# Target file name (without extension).
-PROJECT = ch
-
-# Directory common source files exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MK20DX256
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x7
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_3_1
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	    # USB Nkey Rollover
-
-include $(TMK_DIR)/tool/chibios/common.mk
-include $(TMK_DIR)/tool/chibios/chibios.mk

@@ 1,2 0,0 @@
-EXTRAKEY_ENABLE = yes
-COMMAND_ENABLE  = no

@@ 1,1 0,0 @@
-MOUSEKEY_ENABLE = yes

@@ 1,4 0,0 @@
-
-MOUSEKEY_ENABLE = yes
-EXTRAKEY_ENABLE = yes
-

@@ 1,4 0,0 @@
-
-MOUSEKEY_ENABLE = yes
-EXTRAKEY_ENABLE = yes
-

@@ 1,1 0,0 @@
-SRC = tetris_text.c

@@ 1,49 0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Build Options
-#   change to "no" to disable the options, or define them in the makefile.mk in 
-#   the appropriate keymap folder that will get included automatically
-#
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif>
\ No newline at end of file

@@ 1,7 0,0 @@
-RGBLIGHT_ENABLE = yes
-NKRO_ENABLE = yes
-
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

@@ 1,2 1,1 @@
 BACKLIGHT_ENABLE = no
-

@@ 1,3 0,0 @@
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

@@ 1,5 0,0 @@
-MOUSEKEY_ENABLE = yes
-BACKLIGHT_ENABLE = yes
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

@@ 1,18 0,0 @@
-# Copyright 2013 Jun Wako <wakojun@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

@@ 1,21 0,0 @@
-# Copyright 2013 Jun Wako <wakojun@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
-
-BACKLIGHT_ENABLE = yes

@@ 1,21 0,0 @@
-# Copyright 2013 Jun Wako <wakojun@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
-
-BACKLIGHT_ENABLE = yes