M keyboards/dp60/config.h => keyboards/dp60/config.h +2 -17
@@ 13,7 13,6 @@
#define MANUFACTURER astro
#define PRODUCT Dumplings
#define DESCRIPTION 60% rgb keyboard with ble extension
-#define LANDING_PAGE yulei.github.io/qmk_webusb_tool/60_wkl.json
/* key matrix size */
#define MATRIX_ROWS 5
@@ 35,13 34,6 @@
/* disable print */
//#define NO_PRINT
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
//rgb light setting
#define RGBLED_NUM 18
#define RGB_DI_PIN D7
@@ 56,16 48,9 @@
#define DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 36
#define DRIVER_2_LED_TOTAL 36
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
-
-// tapping setting
-//#define TAPPING_TERM 200
-//#define RETRO_TAPPING
-//#define PERMISSIVE_HOLD
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
-#if defined(WEBUSB_ENABLE) || defined(RAW_ENABLE)
-#define WEBUSB_KEYCOUNT 61
-#define WEBUSB_LAYERCOUNT 2
+#if defined(RAW_ENABLE)
//VIA
#define DYNAMIC_KEYMAP_LAYER_COUNT 2
// EEPROM usage
M keyboards/dp60/dp60.c => keyboards/dp60/dp60.c +25 -1
@@ 159,4 159,28 @@ webusb_pos_t webusb_keymap[] = {
{4, 0}, {4, 1}, {4, 2}, {4, 6}, {4, 10}, {4, 11}, {4, 12}, {4, 13},
};
-#endif>
\ No newline at end of file
+#endif
+
+#ifndef RAW_ENABLE
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+#else
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+#endif
+ if (record->event.pressed) {
+ switch(keycode) {
+ #ifdef RGBLIGHT_ENABLE
+ #ifdef RGB_MATRIX_ENABLE
+ case KC_F13: // toggle rgb matrix
+ rgb_matrix_toggle();
+ return false;
+ case KC_F14:
+ rgb_matrix_step();
+ return false;
+ #endif
+ #endif
+ default:
+ break;
+ }
+ }
+ return true;
+}
A keyboards/dp60/keymaps/allleds/keymap.c => keyboards/dp60/keymaps/allleds/keymap.c +17 -0
@@ 0,0 1,17 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_DEL, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT,KC_RGUI, TG(1), KC_RCTL),
+
+ [1] = LAYOUT_60_ansi_split_bs_rshift(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_PSCR,
+ RESET, RGB_TOG,RGB_MOD,_______,KC_F13,KC_F14,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,
+ _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN, KC_UP,KC_RIGHT,KC_HOME,KC_END,_______,
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+ _______,_______,_______, _______, _______,_______,TG(0),_______),
+};
A keyboards/dp60/keymaps/allleds/rules.mk => keyboards/dp60/keymaps/allleds/rules.mk +38 -0
@@ 0,0 1,38 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+RGBLIGHT_ENABLE = yes # Use RGB underglow light
+RGB_MATRIX_ENABLE = yes # Use RGB matrix
+
+LAYOUTS = 60_ansi 60_hhkb 60_iso 60_ansi_split_bs_rshift
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c
M keyboards/dp60/keymaps/default/keymap.c => keyboards/dp60/keymaps/default/keymap.c +5 -5
@@ 2,16 2,16 @@
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_60_ansi_split_bs_rshift(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_DEL, KC_BSPC,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_DEL, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, MO(1),
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT,KC_RGUI, TG(1), KC_RCTL),
-
+
[1] = LAYOUT_60_ansi_split_bs_rshift(
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_PSCR,
- RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,
+ RESET, RGB_TOG,RGB_MOD,_______,KC_F13,KC_F14,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,
_______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN, KC_UP,KC_RIGHT,KC_HOME,KC_END,_______,
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
_______,_______,_______, _______, _______,_______,TG(0),_______),
-};>
\ No newline at end of file
+};
D keyboards/dp60/keymaps/via/readme.md => keyboards/dp60/keymaps/via/readme.md +0 -1
@@ 1,1 0,0 @@
-At this point, September 2019, this requires a custom version of VIA in order for VIA enabled keymaps to work. >
\ No newline at end of file
M keyboards/dp60/keymaps/via/rules.mk => keyboards/dp60/keymaps/via/rules.mk +14 -22
@@ 1,47 1,39 @@
# MCU name
MCU = atmega32u4
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-#OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no # MIDI support
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-#RGBLIGHT_ENABLE = yes # Use RGB bottom light
+RGBLIGHT_ENABLE = yes # Use RGB bottom light
RGB_MATRIX_ENABLE = yes # Use RGB matrix
RAW_ENABLE = yes
-#WEBUSB_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes
CUSTOM_MATRIX = yes
SRC += matrix.c keyboards/wilba_tech/wt_main.c
-#keyboards/stm60/webusb.c
M keyboards/dp60/rules.mk => keyboards/dp60/rules.mk +7 -12
@@ 11,33 11,28 @@ MCU = atmega32u4
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-#OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no # MIDI support
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-#RGBLIGHT_ENABLE = yes # Use RGB bottom light
+#RGBLIGHT_ENABLE = yes # Use RGB underglow light
RGB_MATRIX_ENABLE = yes # Use RGB matrix
LAYOUTS = 60_ansi 60_hhkb 60_iso 60_ansi_split_bs_rshift
CUSTOM_MATRIX = yes
-SRC += matrix.c
+SRC += matrix.c