30 files changed, 54 insertions(+), 546 deletions(-)

M keyboards/1upkeyboards/sweet16/v1/config.h
M keyboards/1upkeyboards/sweet16/v1/v1.c
M keyboards/alps64/alps64.c
M keyboards/alps64/config.h
M keyboards/amjpad/amjpad.c
M keyboards/amjpad/config.h
M keyboards/exclusive/e6v2/le/config.h
M keyboards/exclusive/e6v2/le/le.c
M keyboards/exclusive/e7v1/config.h
M keyboards/exclusive/e7v1/e7v1.c
M keyboards/fc980c/config.h
M keyboards/fc980c/fc980c.c
M keyboards/foxlab/leaf60/hotswap/config.h
M keyboards/foxlab/leaf60/hotswap/hotswap.c
M keyboards/foxlab/leaf60/universal/config.h
M keyboards/foxlab/leaf60/universal/universal.c
M keyboards/hineybush/hineyg80/config.h
M keyboards/hineybush/hineyg80/hineyg80.c
M keyboards/jc65/v32u4/config.h
M keyboards/jc65/v32u4/v32u4.c
M keyboards/kmac/config.h
M keyboards/kmac/kmac.c
M keyboards/melody96/config.h
M keyboards/melody96/melody96.c
M keyboards/peiorisboards/ixora/config.h
M keyboards/peiorisboards/ixora/ixora.c
M keyboards/redscarf_iiplus/verb/config.h
M keyboards/redscarf_iiplus/verb/verb.c
M keyboards/sck/osa/config.h
M keyboards/sck/osa/osa.c

@@ 17,6 17,12 @@
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5
 
+#ifndef CONVERT_TO_PROTON_C
+#    define LED_NUM_LOCK_PIN B0 // RXLED
+#    define LED_CAPS_LOCK_PIN D5 // TXLED
+#    define LED_PIN_ON_STATE 0
+#endif
+
 /* Underglow options */
 #define RGB_DI_PIN B1
 #ifdef RGB_DI_PIN

@@ 1,21 1,1 @@
 #include "v1.h"
-
-void led_set_kb(uint8_t usb_led) {
-#ifndef CONVERT_TO_PROTON_C
-    /* Map RXLED to USB_LED_NUM_LOCK */
-    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        setPinOutput(B0);
-        writePinLow(B0);
-    } else {
-        setPinInput(B0);
-    }
-
-    /* Map TXLED to USB_LED_CAPS_LOCK */
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        setPinOutput(D5);
-        writePinLow(D5);
-    } else {
-        setPinInput(D5);
-    }
-#endif
-}

@@ 15,23 15,3 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "alps64.h"
-
-void keyboard_pre_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-    setPinOutput(C5);
-    keyboard_pre_init_user();
-}
-
-void led_set_kb(uint8_t usb_led)
-{
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        // output high
-        writePinHigh(C5);
-    } else {
-        // Hi-Z
-        writePinLow(C5);
-    }
-
-    led_set_user(usb_led);
-}

@@ 37,6 37,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN C5
+
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 

@@ 1,30 1,1 @@
 #include "amjpad.h"
-#include "led.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-};
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
-void led_init_ports(void) {
-    // * Set our LED pins as output
-    DDRD |= (1<<6);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-        // Turn numlock on
-        PORTD &= ~(1<<6);
-    } else {
-        // Turn numlock off
-        PORTD |= (1<<6);
-    }
-}

@@ 54,6 54,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+#define LED_NUM_LOCK_PIN D6
+#define LED_PIN_ON_STATE 0
+
 /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 4

@@ 37,6 37,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { B5, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7 }
 #define UNUSED_PINS
 
+#define LED_CAPS_LOCK_PIN B7
+#define LED_PIN_ON_STATE 0
+
 #define RGB_DI_PIN E6
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS

@@ 1,33 1,1 @@
 #include "le.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_user(uint8_t usb_led) {
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 7); 
-		PORTB &= ~(1 << 7);
-	} else {
-		DDRB &= ~(1 << 7); 
-		PORTB &= ~(1 << 7);
-	}
-}
-

@@ 22,6 22,8 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN F0
+
 /* number of backlight levels */
 #define BACKLIGHT_PIN B7
 #ifdef BACKLIGHT_PIN

@@ 1,25 1,1 @@
 #include "e7v1.h"
-
-void matrix_init_kb(void) {
-  setPinOutput(F0);
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-    writePinHigh(F0);
-  } else {
-    writePinLow(F0);
-  }
-
-  led_set_user(usb_led);
-}
-

@@ 49,7 49,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE  0
-#define TAPPING_TERM      175
+
+#define LED_NUM_LOCK_PIN B4
+#define LED_CAPS_LOCK_PIN B5
+#define LED_SCROLL_LOCK_PIN B6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 // #define LOCKING_SUPPORT_ENABLE

@@ 22,46 22,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
 #ifdef ACTUATION_DEPTH_ADJUSTMENT
     adjust_actuation_point(ACTUATION_DEPTH_ADJUSTMENT);
 #endif
 
 	matrix_init_user();
 }
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-        PORTB |=  (1<<4);
-    } else {
-        PORTB &= ~(1<<4);
-    }
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        PORTB |=  (1<<5);
-    } else {
-        PORTB &= ~(1<<5);
-    }
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-        PORTB |=  (1<<6);
-    } else {
-        PORTB &= ~(1<<6);
-    }
-
-	led_set_user(usb_led);
-}

@@ 48,6 48,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN E6
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 4

@@ 14,46 14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "hotswap.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-  setPinOutput(E6);
-  matrix_init_user();
-}
-/*
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/
-
-void led_set_kb(uint8_t usb_led) {
-  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinLow(E6);
-  } else {
-    writePinHigh(E6);
-  }
-	led_set_user(usb_led);
-}

@@ 48,6 48,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN E6
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3

@@ 14,48 14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "universal.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-  setPinOutput(E6);
-  matrix_init_user();
-}
-
-/*
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/
-
-
-void led_set_kb(uint8_t usb_led) {
-  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinLow(E6);
-  } else {
-    writePinHigh(E6);
-  }
-	led_set_user(usb_led);
-}

@@ 22,6 22,11 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+
+#define LED_NUM_LOCK_PIN C6
+#define LED_CAPS_LOCK_PIN B6
+#define LED_SCROLL_LOCK_PIN B5
+
 /* number of backlight levels */
 
 #ifdef BACKLIGHT_PIN

@@ 14,50 14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "hineyg80.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-	if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        // Turn numlock on
-		writePinHigh(C6);
-    } else {
-        // Turn numlock off
-	    writePinLow(C6);
-    }
-	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-		writePinHigh(B6);
-    } else {
-        // Turn capslock off
-		writePinLow(B6);
-    }
-	if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-        // Turn scrolllock on
-	    writePinHigh(B5);
-    } else {
-        // Turn scrolllock off
-		writePinLow(B5);
-    }
-	led_set_user(usb_led);
-}

@@ 37,6 37,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4, F5 }
 #define UNUSED_PINS
 
+#define LED_CAPS_LOCK_PIN B2
+#define LED_PIN_ON_STATE 0
+
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS

@@ 1,36 1,1 @@
 #include "v32u4.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // output low
-        DDRB |= (1<<2);
-        PORTB &= ~(1<<2);
-    } else {
-        // Hi-Z
-        DDRB &= ~(1<<2);
-        PORTB &= ~(1<<2);
-    }
-	led_set_user(usb_led);
-}

@@ 45,6 45,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 //#define DIODE_DIRECTION
 
+#define LED_CAPS_LOCK_PIN B0
+#define LED_SCROLL_LOCK_PIN E6
+#define LED_PIN_ON_STATE 0
+
 /* number of backlight levels */
 //#define BACKLIGHT_LEVELS 3
 // #define BACKLIGHT_PIN B7

@@ 15,62 15,9 @@
  */
 #include "kmac.h"
 
-#define CAPS_PIN B0
-#define SCROLL_PIN E6
 #define F_ROW_MASK 0b01
 #define WASD_MASK 0b10
 
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    setPinOutput(CAPS_PIN);
-    setPinOutput(SCROLL_PIN);
-
-    matrix_init_user();
-}
-
-/*
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-*/
-
-/* LED pin configuration
- * Scroll Lock: Low PE6
- * Caps Lock: Low PB0
- */
-void led_set_kb(uint8_t usb_led) {
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinLow(CAPS_PIN);
-    } else {
-        writePinHigh(CAPS_PIN);
-    }
-
-    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-        writePinLow(SCROLL_PIN);
-    } else {
-        writePinHigh(SCROLL_PIN);
-    }
-
-    led_set_user(usb_led);
-}
-
 void backlight_init_ports(void) {
     setPinOutput(B1);
     setPinOutput(B2);

@@ 22,6 22,11 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION ROW2COL
 
+#define LED_NUM_LOCK_PIN C6
+#define LED_CAPS_LOCK_PIN C7
+#define LED_SCROLL_LOCK_PIN B5
+#define LED_PIN_ON_STATE 0
+
 /* number of backlight levels */
 #define BACKLIGHT_PIN B6
 #ifdef BACKLIGHT_PIN

@@ 1,23 1,1 @@
 #include "melody96.h"
-
-void led_set_kb(uint8_t usb_led) {
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-		DDRC |= (1 << 6); PORTC &= ~(1 << 6);
-	} else {
-		DDRC &= ~(1 << 6); PORTC &= ~(1 << 6);
-	}
-
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRC |= (1 << 7); PORTC &= ~(1 << 7);
-	} else {
-		DDRC &= ~(1 << 7); PORTC &= ~(1 << 7);
-	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-
-    led_set_user(usb_led);
-}

@@ 22,3 22,7 @@
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 0
+
+#define LED_NUM_LOCK_PIN A9
+#define LED_CAPS_LOCK_PIN A10
+#define LED_SCROLL_LOCK_PIN A8

@@ 1,43 1,1 @@
 #include "ixora.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    setPinOutput(A8);
-    setPinOutput(A9);
-    setPinOutput(A10);
-    writePinLow(A8);
-    writePinLow(A9);
-    writePinLow(A10);
-
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-
-    return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinHigh(A10);
-    } else {
-        writePinLow(A10);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        writePinHigh(A9);
-    } else {
-        writePinLow(A9);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-        writePinHigh(A8);
-    } else {
-        writePinLow(A8);
-    }
-    led_set_user(usb_led);
-}

@@ 49,10 49,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define LED_NUM_LOCK_PIN E6
+#define LED_CAPS_LOCK_PIN C7
+#define LED_PIN_ON_STATE 0
 
 #define BACKLIGHT_PIN B7
 //   #define BACKLIGHT_BREATHING

@@ 14,38 14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "verb.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-	setPinOutput(C7);
-	setPinOutput(E6);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinLow(C7);
-    } else {
-        writePinHigh(C7);
-    }
-
-    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        writePinLow(E6);
-    } else {
-        writePinHigh(E6);
-    }
-
-    led_set_user(usb_led);
-}

@@ 91,6 91,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
+#define LED_NUM_LOCK_PIN C7
+#define LED_CAPS_LOCK_PIN C6
+#define LED_SCROLL_LOCK_PIN B6
+
 /* number of backlight levels */
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

@@ 14,60 14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "osa.h"
-
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-*/
-
-void matrix_init_board(void){
-    setPinOutput(C7);
-    setPinOutput(C6);
-    setPinOutput(B6);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        writePinHigh(C7);
-    } else {
-        writePinLow(C7);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinHigh(C6);
-    } else {
-        writePinLow(C6);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-        writePinHigh(B6);
-    } else {
-        writePinLow(B6);
-    }
-  led_set_user(usb_led);
-}
-