A keyboards/handwired/leftynumpad/config.h => keyboards/handwired/leftynumpad/config.h +102 -0
@@ 0,0 1,102 @@
+/*
+Copyright 2020 Tom Swartz
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xBEEF
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Tom Swartz
+#define PRODUCT LeftyNumpad
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 }
+#define MATRIX_COL_PINS { E6, B4, B5, B6, B2 }
+#define UNUSED_PINS {D3, D2, B0, D5, B3, B1, F7, F6, F5, F4 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 10
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
A keyboards/handwired/leftynumpad/info.json => keyboards/handwired/leftynumpad/info.json +36 -0
@@ 0,0 1,36 @@
+{
+ "keyboard_name": "LeftyNumpad",
+ "url": "https://github.com/tomswartz07",
+ "maintainer": "Tom Swartz",
+ "width": 5,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"label":"0,0", "x":0, "y":0},
+ {"label":"1,0", "x":1, "y":0},
+ {"label":"2,0", "x":2, "y":0},
+ {"label":"3,0", "x":3, "y":0},
+ {"label":"4,0", "x":4, "y":0},
+ {"label":"0,1", "x":0, "y":1},
+ {"label":"1,1", "x":1, "y":1},
+ {"label":"2,1", "x":2, "y":1},
+ {"label":"3,1", "x":3, "y":1},
+ {"label":"0,2", "x":0, "y":2},
+ {"label":"1,2", "x":1, "y":2},
+ {"label":"2,2", "x":2, "y":2},
+ {"label":"3,2", "x":3, "y":2},
+ {"label":"5,1", "x":4, "y":1, "h":2},
+ {"label":"0,3", "x":0, "y":3},
+ {"label":"1,3", "x":1, "y":3},
+ {"label":"2,3", "x":2, "y":3},
+ {"label":"3,3", "x":3, "y":3},
+ {"label":"0,4", "x":0, "y":4},
+ {"label":"1,4", "x":1, "y":4},
+ {"label":"2,4", "x":2, "y":4},
+ {"label":"3,4", "x":3, "y":4},
+ {"label":"4,3", "x":4, "y":3, "h":2}
+ ]
+ }
+ }
+}
A keyboards/handwired/leftynumpad/keymaps/default/keymap.c => keyboards/handwired/leftynumpad/keymaps/default/keymap.c +92 -0
@@ 0,0 1,92 @@
+/* Copyright 2020 Tom Swartz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _NP,
+ _FN
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+ KC_00 = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* NumberPad Layer
+ ,---------------------------------------.
+ | Back | Num | / | * | - |
+ | Space | Lock | | | |
+ |-------+-------+-------+-------+-------|
+ | Tab | 7 | 8 | 9 | + |
+ | | Home | Up | PgUp | |
+ |-------+-------+-------+-------| |
+ | Layer | 4 | 5 | 6 | |
+ | Toggle| Left | | Right | |
+ |-------+-------+-------+-------+-------|
+ | Page | 1 | 2 | 3 | Enter |
+ | Up | End | Down | PgDn | |
+ |-------+-------+-------+-------| |
+ | Page | 00 | 0 | . | |
+ | Down | | | | |
+ `---------------------------------------'
+*/
+ [_NP] = LAYOUT(
+ KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_TAB, KC_7, KC_8, KC_9,
+ TG(_NP), KC_4, KC_5, KC_6, KC_PPLS,
+ KC_PGUP, KC_1, KC_2, KC_3,
+ KC_PGDOWN, KC_00, KC_0, KC_PDOT, KC_PENT
+ ),
+/* Macropad/Function Layer
+ ,---------------------------------------.
+ | `~ | Play | F13 | Prev | Next |
+ | | Pause | | | |
+ |-------+-------+-------+-------+-------|
+ | Tab | F14 | F15 | 9 | + |
+ | | | | PgUp | |
+ |-------+-------+-------+-------| |
+ | Layer | 4 | 5 | 6 | |
+ | Toggle| Left | | Right | |
+ |-------+-------+-------+-------+-------|
+ | U | B | 2 | 3 | Enter |
+ | | | Down | PgDn | |
+ |-------+-------+-------+-------| |
+ | D | F | 0 | . | |
+ | | | | | |
+ `---------------------------------------'
+*/
+ [_FN] = LAYOUT(
+ KC_GRV, KC_MPLY, KC_F13, KC_MPRV, KC_MNXT,
+ _______, KC_F14, KC_F15, _______,
+ _______, _______, _______, _______, _______,
+ KC_U, KC_B, _______, _______,
+ KC_D, KC_F, _______, _______, _______
+ ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case KC_00:
+ if (record->event.pressed) {
+ // when keycode DOUBLEZERO is pressed
+ SEND_STRING("00");
+ }
+ break;
+ }
+ return true;
+}
A keyboards/handwired/leftynumpad/keymaps/default/readme.md => keyboards/handwired/leftynumpad/keymaps/default/readme.md +21 -0
@@ 0,0 1,21 @@
+# The default keymap for LeftyNumpad
+
+## Base Layer
+```
+ ,---------------------------------------.
+ | Back | Num | / | * | - |
+ | Space | Lock | | | |
+ |-------+-------+-------+-------+-------|
+ | Layer | 7 | 8 | 9 | + |
+ | Up | Home | Up | PgUp | |
+ |-------+-------+-------+-------| |
+ | Layer | 4 | 5 | 6 | |
+ | Down | Left | | Right | |
+ |-------+-------+-------+-------+-------|
+ | Page | 1 | 2 | 3 | Enter |
+ | Up | End | Down | PgDn | |
+ |-------+-------+-------+-------| |
+ | Page | 00 | 0 | . | |
+ | Down | | | | |
+ `---------------------------------------'
+```
A keyboards/handwired/leftynumpad/leftynumpad.c => keyboards/handwired/leftynumpad/leftynumpad.c +17 -0
@@ 0,0 1,17 @@
+/* Copyright 2020 Tom Swartz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "leftynumpad.h"
A keyboards/handwired/leftynumpad/leftynumpad.h => keyboards/handwired/leftynumpad/leftynumpad.h +42 -0
@@ 0,0 1,42 @@
+/* Copyright 2020 Tom Swartz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+ K05, K15, K25, K35, K45, \
+ K04, K14, K24, K34, \
+ K03, K13, K23, K33, K43, \
+ K02, K12, K22, K32, \
+ K01, K11, K21, K31, K41 \
+) \
+{ \
+ { K05, K15, K25, K35, K45 }, \
+ { K04, K14, K24, K34 }, \
+ { K03, K13, K23, K33, K43 }, \
+ { K02, K12, K22, K32 }, \
+ { K01, K11, K21, K31, K41 } \
+}
A keyboards/handwired/leftynumpad/readme.md => keyboards/handwired/leftynumpad/readme.md +16 -0
@@ 0,0 1,16 @@
+# LeftyNumpad
+
+
+
+A small numberpad/macropad intended to be placed southpaw-style on the left
+side of a keyboard.
+
+* Keyboard Maintainer: [Tom Swartz](https://github.com/tomswartz07)
+* Hardware Supported: Handwired, Uses Arudino Micro.
+* Hardware Availability: Handwired hardware.
+
+Make example for this keyboard (after setting up your build environment):
+
+ make handwired/leftynumpad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
A keyboards/handwired/leftynumpad/rules.mk => keyboards/handwired/leftynumpad/rules.mk +22 -0
@@ 0,0 1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output