M keyboards/converter/adb_usb/rules.mk => keyboards/converter/adb_usb/rules.mk +16 -18
@@ 1,7 1,7 @@
# MCU name
-# atmega32u4 Teensy2.0
-# atemga32u4 TMK Converter rev.1
-# atemga32u2 TMK Converter rev.2
+# atmega32u4 Teensy2.0
+# atemga32u4 TMK Converter rev.1
+# atemga32u2 TMK Converter rev.2
MCU = atmega32u4
# Processor frequency.
@@ 50,25 50,23 @@ BOOTLOADER = caterina
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
-# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2
+# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2
# LUFA bootloader 4096
# USBaspLoader 2048
# Build Options
# comment out to disable the options.
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA
-EXTRAKEY_ENABLE = yes
-USB_HID_ENABLE = yes
-BACKLIGHT_ENABLE = no
-#BLUETOOTH = AdafruitBLE # For Adafruit Feather 32U4 BLE support, uncomment this line
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA
+EXTRAKEY_ENABLE = yes
+USB_HID_ENABLE = yes
+BACKLIGHT_ENABLE = no
+#BLUETOOTH = AdafruitBLE # For Adafruit Feather 32U4 BLE support, uncomment this line
+CUSTOM_MATRIX = yes
-CUSTOM_MATRIX = yes
-SRC = matrix.c \
- adb.c \
- led.c
+SRC = matrix.c adb.c led.c
M keyboards/converter/hp_46010a/rules.mk => keyboards/converter/hp_46010a/rules.mk +7 -9
@@ 39,7 39,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
+# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = halfkay
@@ 48,8 48,8 @@ BOOTLOADER = halfkay
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
@@ 62,11 62,9 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
API_SYSEX_ENABLE = no
SPLIT_KEYBOARD = no
WAIT_FOR_USB = yes
-
+LAYOUTS_HAS_RGB = no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-LAYOUTS_HAS_RGB = NO
-
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes
-SRC = matrix.c>
\ No newline at end of file
+
+SRC = matrix.c
M keyboards/converter/ibm_5291/rules.mk => keyboards/converter/ibm_5291/rules.mk +5 -7
@@ 39,7 39,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
+# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = halfkay
@@ 62,11 62,9 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
API_SYSEX_ENABLE = no
SPLIT_KEYBOARD = no
WAIT_FOR_USB = yes
-
+LAYOUTS_HAS_RGB = no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-LAYOUTS_HAS_RGB = NO
-
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes
-SRC = matrix.c>
\ No newline at end of file
+
+SRC = matrix.c
M keyboards/converter/ibm_terminal/rules.mk => keyboards/converter/ibm_terminal/rules.mk +7 -9
@@ 36,7 36,6 @@ F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
@@ 46,11 45,11 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
+# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
@@ 61,12 60,11 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
UNICODEMAP_ENABLE = yes
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
PS2_USE_USART = yes
-API_SYSEX_ENABLE = n
-CUSTOM_MATRIX = yes
-
+API_SYSEX_ENABLE = no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+CUSTOM_MATRIX = yes
-SRC = matrix.c led.c>
\ No newline at end of file
+SRC = matrix.c led.c
M keyboards/converter/m0110_usb/rules.mk => keyboards/converter/m0110_usb/rules.mk +17 -18
@@ 1,7 1,7 @@
# MCU name
-# atmega32u4 Teensy2.0
-# atemga32u4 TMK Converter rev.1
-# atemga32u2 TMK Converter rev.2
+# atmega32u4 Teensy2.0
+# atemga32u4 TMK Converter rev.1
+# atemga32u2 TMK Converter rev.2
MCU = atmega32u4
# Processor frequency.
@@ 43,31 43,30 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
+# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
-# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2
+# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2
# LUFA bootloader 4096
# USBaspLoader 2048
# Build Options
# comment out to disable the options.
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA
-EXTRAKEY_ENABLE = yes
-USB_HID_ENABLE = yes
-BACKLIGHT_ENABLE = no
-#BLUETOOTH = AdafruitBLE # For Adafruit Feather 32U4 BLE support, uncomment this line
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA
+EXTRAKEY_ENABLE = yes
+USB_HID_ENABLE = yes
+BACKLIGHT_ENABLE = no
+#BLUETOOTH = AdafruitBLE # For Adafruit Feather 32U4 BLE support, uncomment this line
+CUSTOM_MATRIX = yes
-CUSTOM_MATRIX = yes
-SRC = matrix.c \
- m0110.c
+SRC = matrix.c m0110.c
M keyboards/converter/palm_usb/rules.mk => keyboards/converter/palm_usb/rules.mk +13 -17
@@ 9,38 9,34 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
BOOTLOADER = caterina
# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
+# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
-UNICODEMAP_ENABLE = no
+UNICODEMAP_ENABLE = no
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-CUSTOM_MATRIX = yes
-
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
#HARDWARE_SERIAL = yes
+CUSTOM_MATRIX = yes
SRC += matrix.c
-
ifdef HARDWARE_SERIAL
- # untested with palm_usb
- SRC += protocol/serial_uart.c
- OPT_DEFS += -DHARDWARE_SERIAL
+ # Untested with palm_usb
+ SRC += protocol/serial_uart.c
+ OPT_DEFS += -DHARDWARE_SERIAL
else
- SRC += protocol/serial_soft.c
+ SRC += protocol/serial_soft.c
endif
DEFAULT_FOLDER = converter/palm_usb/stowaway
-
M keyboards/converter/sun_usb/rules.mk => keyboards/converter/sun_usb/rules.mk +10 -13
@@ 9,14 9,14 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
BOOTLOADER = lufa-dfu
# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
+# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
@@ 24,21 24,18 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
UNICODEMAP_ENABLE = yes
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-CUSTOM_MATRIX = yes
-
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
#HARDWARE_SERIAL = yes
+CUSTOM_MATRIX = yes
SRC += matrix.c led.c
-
ifdef HARDWARE_SERIAL
- SRC += protocol/serial_uart.c
- OPT_DEFS += -DHARDWARE_SERIAL
+ SRC += protocol/serial_uart.c
+ OPT_DEFS += -DHARDWARE_SERIAL
else
- SRC += protocol/serial_soft.c
+ SRC += protocol/serial_soft.c
endif
DEFAULT_FOLDER = converter/sun_usb/type5
M keyboards/converter/usb_usb/rules.mk => keyboards/converter/usb_usb/rules.mk +12 -14
@@ 1,7 1,6 @@
# MCU name
MCU = atmega32u4
-
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
@@ 23,7 22,6 @@ F_CPU ?= 16000000
DEFAULT_FOLDER = converter/usb_usb/hasu
-
#
# LUFA specific
#
@@ 45,7 43,7 @@ F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
+# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
@@ 55,15 53,15 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# comment out to disable the options.
#
-# BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-# MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-# CONSOLE_ENABLE = yes # Console for debug(+400)
-# COMMAND_ENABLE = yes # Commands for debug and configuration
-# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-# NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
-# BACKLIGHT_ENABLE = yes
-USB_HID_ENABLE = yes
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+#MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+#CONSOLE_ENABLE = yes # Console for debug(+400)
+#COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+#BACKLIGHT_ENABLE = yes
+USB_HID_ENABLE = yes
+CUSTOM_MATRIX = yes
-CUSTOM_MATRIX = yes
-SRC = custom_matrix.cpp>
\ No newline at end of file
+SRC = custom_matrix.cpp
M keyboards/converter/xt_usb/rules.mk => keyboards/converter/xt_usb/rules.mk +9 -12
@@ 14,7 14,6 @@ MCU = atmega32u4
# software delays.
F_CPU = 16000000
-
#
# LUFA specific
#
@@ 42,21 41,19 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# BOOTLOADER = caterina # Pro Micro
BOOTLOADER = halfkay # Teensy
-
# Build Options
# comment out to disable the options.
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = yes # USB Nkey Rollover
-XT_ENABLE = yes
-CUSTOM_MATRIX = yes
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover
+XT_ENABLE = yes
+CUSTOM_MATRIX = yes
+SRC = matrix.c led.c
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
-
-SRC = matrix.c led.c