A keyboards/do60/config.h => keyboards/do60/config.h +82 -0
@@ 0,0 1,82 @@
+/*
+Copyright 2012 Doyu Studio <sy_yang@doyustudio.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Shopkey by Doyu Studio
+#define PRODUCT Do60
+#define DESCRIPTION Do60 Keyboard PCB by Doyu Studio
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3, B0 }
+#define UNUSED_PINS
+
+/* Backlight Setup */
+#define BACKLIGHT_PIN F4
+#define BACKLIGHT_LEVELS 6
+//#define BACKLIGHT_BREATHING
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* RGB Underglow
+ * F5 PIN for DO60's pre-soldered WS2812 LEDs
+ */
+#define RGB_DI_PIN F5
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20 // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 15
+#define RGBLIGHT_VAL_STEP 15
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define TAPPING_TERM 200
+
+#endif
A keyboards/do60/do60.c => keyboards/do60/do60.c +19 -0
@@ 0,0 1,19 @@
+#include "do60.h"
+
+
+extern inline void do60_caps_led_on(void);
+extern inline void do60_bl_led_on(void);
+
+extern inline void do60_caps_led_off(void);
+extern inline void do60_bl_led_off(void);
+
+
+void led_set_kb(uint8_t usb_led) {
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ do60_caps_led_on();
+ } else {
+ do60_caps_led_off();
+ }
+
+ led_set_user(usb_led);
+}
A keyboards/do60/do60.h => keyboards/do60/do60.h +41 -0
@@ 0,0 1,41 @@
+#ifndef DO60_H
+#define DO60_H
+
+#include "quantum.h"
+#include "led.h"
+
+/* DO60 LEDs
+ * GPIO pads
+ * 0 F7 not connected
+ * 1 F6 RGB PWM Underglow
+ * 2 F5 Backlight LED
+ * 3 F4 not connected
+ * B2 Capslock LED
+ * B0 not connected
+ */
+
+
+inline void do60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
+inline void do60_bl_led_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); }
+
+inline void do60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+inline void do60_bl_led_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
+
+
+
+/* Do60 Keymap Definition Macro */
+#define KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+ K40, K41, K42, K45, K46, K47, K4A, K4B, K4C, K4D, K4E \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO, K1E }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+ { K40, K41, K42, KC_NO,KC_NO,K45, K46, K47, KC_NO,KC_NO,K4A, K4B, K4C, K4D, K4E } \
+}
+
+#endif
A keyboards/do60/keymaps/default/keymap.c => keyboards/do60/keymaps/default/keymap.c +47 -0
@@ 0,0 1,47 @@
+#include "do60.h"
+#include "action_layer.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ // 0: Base Layer
+ [0] = KEYMAP(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \
+ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_NO, KC_UP, KC_SLSH, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_BSPC, KC_RGUI, F(0), KC_LEFT, KC_DOWN, KC_RIGHT),
+
+ // 1: Function Layer
+ [1] = KEYMAP(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, \
+ KC_NO, RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \
+ KC_NO, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SMOD, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \
+ KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP, KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_RSFT, KC_NO , KC_PGUP, KC_INS, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC,KC_SPC, KC_DEL, KC_RGUI, F(0), KC_HOME, KC_PGDOWN,KC_END),
+
+};
+
+// Custom Actions
+ const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
+ };
+
+// Macros
+/*
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) { register_code(KC_RSFT); }
+ else { unregister_code(KC_RSFT); }
+ break;
+ }
+
+ return MACRO_NONE;
+};
+*/
+// Loop
+void matrix_scan_user(void) {
+ // Empty
+};<
\ No newline at end of file
A keyboards/do60/keymaps/default/readme.md => keyboards/do60/keymaps/default/readme.md +5 -0
@@ 0,0 1,5 @@
+
+
+All of the keys which CAN have a function should be assigned one.
+
+The keys with KC_NO cannot be assigned a value
A keyboards/do60/keymaps/test/keymap.c => keyboards/do60/keymaps/test/keymap.c +47 -0
@@ 0,0 1,47 @@
+#include "do60.h"
+#include "action_layer.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ // 0: Base Layer
+ [0] = KEYMAP(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \
+ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_UP, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC,KC_SPC, KC_DEL, KC_RGUI, F(0), KC_LEFT, KC_DOWN, KC_RIGHT),
+
+ // 1: Function Layer
+ [1] = KEYMAP(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, \
+ KC_NO, RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \
+ KC_NO, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SMOD, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \
+ KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP, KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_RSFT, KC_NO , KC_PGUP, KC_INS, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC,KC_SPC, KC_DEL, KC_RGUI, F(0), KC_HOME, KC_PGDOWN,KC_END),
+
+};
+
+// Custom Actions
+ const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
+ };
+
+// Macros
+/*
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) { register_code(KC_RSFT); }
+ else { unregister_code(KC_RSFT); }
+ break;
+ }
+
+ return MACRO_NONE;
+};
+*/
+// Loop
+void matrix_scan_user(void) {
+ // Empty
+};<
\ No newline at end of file
A keyboards/do60/keymaps/test/readme.md => keyboards/do60/keymaps/test/readme.md +5 -0
@@ 0,0 1,5 @@
+
+
+All of the keys which CAN have a function should be assigned one.
+
+The keys with KC_NO cannot be assigned a value
A keyboards/do60/readme.md => keyboards/do60/readme.md +11 -0
@@ 0,0 1,11 @@
+# QMK Firmware for DoyuStudio DO60 PCB
+
+
+## Quantum MK Firmware
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+Board supports in-switch LEDs (two-pin, single colour)
+Build-in WS2182 RGB LED for underglow lighting.
+
+## Build
+To build the default keymap, simply run `make do60:default`.<
\ No newline at end of file
A keyboards/do60/rules.mk => keyboards/do60/rules.mk +64 -0
@@ 0,0 1,64 @@
+# MCU name
+MCU = atmega32u4
+
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+# LUFA specific
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+AUDIO_ENABLE = no # Audio output on port C6
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+COMMAND_ENABLE = no # Commands for debug and configuration
+CONSOLE_ENABLE = no # Console for debug(+400)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+MIDI_ENABLE = no # MIDI controls
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+UNICODE_ENABLE = no # Unicode