M keyboards/matrix/noah/boards/noah_bd/board.mk => keyboards/matrix/noah/boards/noah_bd/board.mk +4 -0
@@ 3,3 3,7 @@ BOARDSRC = $(BOARD_PATH)/boards/noah_bd/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/noah_bd
+
+# Shared variables
+ALLCSRC += $(BOARDSRC)
+ALLINC += $(BOARDINC)
M keyboards/matrix/noah/config.h => keyboards/matrix/noah/config.h +9 -7
@@ 17,8 17,12 @@
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
+#define MATRIX_ROW_PINS { B0, A1, C14, C13, A0}
+#define MATRIX_COL_PINS { C15, B10, B7, B6, B5, B4, A15, A10, A9, A8, B15, B14, B13, B12, B2}
+#define UNUSED_PINS
+
#define DIODE_DIRECTION COL2ROW
-#define DEBOUNCING_DELAY 5
+#define DEBOUNCE 5
// i2c setting
#define USE_I2CV1
@@ 37,13 41,11 @@
#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
/* indicator rgb */
-#define WS2812_LED_N 7
-#define RGBLED_NUM WS2812_LED_N
+#define RGBLED_NUM 7
#define RGB_DI_PIN B1
#define RGBLIGHT_ANIMATIONS
-//#define WS2812_EXTERNAL_PULLUP
// tapping setting
-#define TAPPING_TERM 200
-#define RETRO_TAPPING
-#define PERMISSIVE_HOLD
+//#define TAPPING_TERM 200
+//#define RETRO_TAPPING
+//#define PERMISSIVE_HOLD
M keyboards/matrix/noah/halconf.h => keyboards/matrix/noah/halconf.h +2 -2
@@ 72,7 72,7 @@
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT TRUE
+#define HAL_USE_GPT FALSE
#endif
/**
@@ 114,7 114,7 @@
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM TRUE
+#define HAL_USE_PWM FALSE
#endif
/**
M keyboards/matrix/noah/matrix.c => keyboards/matrix/noah/matrix.c +1 -1
@@ 130,7 130,7 @@ uint8_t matrix_scan(void)
}
}
- if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCING_DELAY) {
+ if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
for (int row = 0; row < MATRIX_ROWS; row++) {
matrix[row] = 0;
for (int col = 0; col < MATRIX_COLS; col++) {
M keyboards/matrix/noah/mcuconf.h => keyboards/matrix/noah/mcuconf.h +23 -38
@@ 1,5 1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ 57,14 57,32 @@
#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
-#define STM32_I2SSRC STM32_I2SSRC_PLLI2S
+#define STM32_I2SSRC STM32_I2SSRC_CKIN
#define STM32_PLLI2SN_VALUE 192
-#define STM32_PLLI2SR_VALUE 2
+#define STM32_PLLI2SR_VALUE 5
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
#define STM32_BKPRAM_ENABLE FALSE
/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY 6
+#define STM32_IRQ_EXTI1_PRIORITY 6
+#define STM32_IRQ_EXTI2_PRIORITY 6
+#define STM32_IRQ_EXTI3_PRIORITY 6
+#define STM32_IRQ_EXTI4_PRIORITY 6
+#define STM32_IRQ_EXTI5_9_PRIORITY 6
+#define STM32_IRQ_EXTI10_15_PRIORITY 6
+#define STM32_IRQ_EXTI16_PRIORITY 6
+#define STM32_IRQ_EXTI17_PRIORITY 15
+#define STM32_IRQ_EXTI18_PRIORITY 6
+#define STM32_IRQ_EXTI19_PRIORITY 6
+#define STM32_IRQ_EXTI20_PRIORITY 6
+#define STM32_IRQ_EXTI21_PRIORITY 15
+#define STM32_IRQ_EXTI22_PRIORITY 15
+
+/*
* ADC driver system settings.
*/
#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
@@ 75,22 93,6 @@
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 15
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI22_IRQ_PRIORITY 15
-
-/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
@@ 164,9 166,9 @@
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 TRUE
+#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 TRUE
+#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_USE_TIM4 FALSE
#define STM32_PWM_USE_TIM5 FALSE
#define STM32_PWM_USE_TIM9 FALSE
@@ 182,11 184,9 @@
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USE_USART3 FALSE
#define STM32_SERIAL_USE_USART6 FALSE
#define STM32_SERIAL_USART1_PRIORITY 12
#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
#define STM32_SERIAL_USART6_PRIORITY 12
/*
@@ 195,28 195,18 @@
#define STM32_SPI_USE_SPI1 TRUE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_USE_SPI3 FALSE
-#define STM32_SPI_USE_SPI4 FALSE
-#define STM32_SPI_USE_SPI5 FALSE
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
-#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
-#define STM32_SPI_SPI5_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
-#define STM32_SPI_SPI5_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6)
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#define STM32_SPI_SPI4_DMA_PRIORITY 1
-#define STM32_SPI_SPI5_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_SPI4_IRQ_PRIORITY 10
-#define STM32_SPI_SPI5_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
@@ 230,23 220,18 @@
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USE_USART3 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_USART3_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
M keyboards/matrix/noah/noah.c => keyboards/matrix/noah/noah.c +9 -18
@@ 50,29 50,20 @@ void rgblight_set(void) {
}
#endif
-void matrix_scan_kb(void) { matrix_scan_user(); }
+void matrix_init_kb(void) { matrix_init_user(); }
-void matrix_init_kb(void) {
- matrix_init_user();
-}
__attribute__((weak))
-void matrix_init_user(void) {
-#ifdef RGBLIGHT_ENABLE
- rgblight_enable();
-#endif
+void matrix_init_user(void) { }
-#ifdef RGB_MATRIX_ENABLE
- rgb_matrix_disable();
-#endif
-}
-
-__attribute__((weak))
-void matrix_scan_user(void) {
+void matrix_scan_kb(void) {
#ifdef RGBLIGHT_ENABLE
- rgblight_task();
+ rgblight_task();
#endif
+ matrix_scan_user();
}
+__attribute__((weak))
+void matrix_scan_user(void) { }
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
@@ 184,9 175,9 @@ led_config_t g_led_config = {
{ 20, 16},{ 42, 32},
{ 45, 16},{ 50, 16},{ 65, 16},{ 80, 16},{ 95, 16},{ 70, 32},{ 84, 32},{ 98, 32},
- { 14, 32},{ 56, 32},{ 50, 48},{ 80, 48},{110, 48},{ 95, 48},{100, 64},{112, 64},
+ { 14, 32},{ 56, 32},{ 65, 48},{ 80, 48},{110, 48},{ 95, 48},{112, 64},{100, 64},
{ 42, 32},{ 38, 64},
- { 0, 32},{ 10, 48},{ 0, 48},{ 20, 48},{ 35, 48},{ 65, 48},{ 0, 64},{ 19, 64},
+ { 0, 32},{ 10, 48},{ 0, 48},{ 20, 48},{ 35, 48},{ 50, 48},{ 0, 64},{ 19, 64},
{105, 0},{120, 0},{135, 0},{150, 0},{165, 0},{180, 0},{202, 0},{224, 0},
{110, 16},{224, 16},
M keyboards/matrix/noah/rules.mk => keyboards/matrix/noah/rules.mk +4 -6
@@ 37,20 37,18 @@ OPT_DEFS =
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no # Mouse keys
+MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # USB Nkey Rollover
-NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in
+NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in
-CUSTOM_MATRIX = yes
RGB_MATRIX_ENABLE = yes
RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
+CUSTOM_MATRIX = yes
# project specific files
-SRC += \
- matrix.c \
- ws2812.c
+SRC += ws2812.c matrix.c