M docs/flashing.md => docs/flashing.md +55 -25
@@ 10,11 10,17 @@ Atmel's DFU bootloader comes on all atmega32u4 chips by default, and is used by
To ensure compatibility with the DFU bootloader, make sure this block is present your `rules.mk` (optionally with `lufa-dfu` or `qmk-dfu` instead):
- # Bootloader
- # This definition is optional, and if your keyboard supports multiple bootloaders of
- # different sizes, comment this out, and the correct address will be loaded
- # automatically (+60). See bootloader.mk for all options.
- BOOTLOADER = atmel-dfu
+```make
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
+```
Compatible flashers:
@@ 64,11 70,17 @@ Arduino boards and their clones use the [Caterina bootloader](https://github.com
To ensure compatibility with the Caterina bootloader, make sure this block is present your `rules.mk`:
- # Bootloader
- # This definition is optional, and if your keyboard supports multiple bootloaders of
- # different sizes, comment this out, and the correct address will be loaded
- # automatically (+60). See bootloader.mk for all options.
- BOOTLOADER = caterina
+```make
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = caterina
+```
Compatible flashers:
@@ 100,11 112,17 @@ Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on al
To ensure compatibility with the Halfkay bootloader, make sure this block is present your `rules.mk`:
- # Bootloader
- # This definition is optional, and if your keyboard supports multiple bootloaders of
- # different sizes, comment this out, and the correct address will be loaded
- # automatically (+60). See bootloader.mk for all options.
- BOOTLOADER = halfkay
+```make
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = halfkay
+```
Compatible flashers:
@@ 125,11 143,17 @@ USBasploader is a bootloader developed by matrixstorm. It is used in some non-US
To ensure compatibility with the USBasploader bootloader, make sure this block is present in your `rules.mk`:
- # Bootloader
- # This definition is optional, and if your keyboard supports multiple bootloaders of
- # different sizes, comment this out, and the correct address will be loaded
- # automatically (+60). See bootloader.mk for all options.
- BOOTLOADER = USBasp
+```make
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = USBasp
+```
Compatible flashers:
@@ 150,11 174,17 @@ BootloadHID is a USB bootloader for AVR microcontrollers. The uploader tool requ
To ensure compatibility with the bootloadHID bootloader, make sure this block is present your `rules.mk`:
- # Bootloader
- # This definition is optional, and if your keyboard supports multiple bootloaders of
- # different sizes, comment this out, and the correct address will be loaded
- # automatically (+60). See bootloader.mk for all options.
- BOOTLOADER = bootloadHID
+```make
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = bootloadHID
+```
Compatible flashers:
M keyboards/ares/rules.mk => keyboards/ares/rules.mk +8 -15
@@ 15,18 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 38,11 35,7 @@ COMMAND_ENABLE = yes
BACKLIGHT_ENABLE = no
RGBLIGHT_ENABLE = no
RGBLIGHT_CUSTOM_DRIVER = yes
-NO_UART = yes
OPT_DEFS = -DDEBUG_LEVEL=0
SRC += i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/bfake/rules.mk => keyboards/bfake/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 45,6 41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/canoe/rules.mk => keyboards/canoe/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 45,6 41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/coseyfannitutti/discipline/rules.mk => keyboards/coseyfannitutti/discipline/rules.mk +3 -49
@@ 1,61 1,19 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
+# Processor frequency
F_CPU = 16000000
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
-#
-# This uses usbaspbootloader
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = USBasp
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-
# Flash program via avrdude, but default command is not suitable.
# You can use plaid:default:program
PROGRAM_CMD = avrdude -c usbasp -p m32 -U flash:w:$(BUILD_DIR)/$(TARGET).hex
@@ 84,8 42,4 @@ AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
LAYOUTS = 65_ansi
M keyboards/donutcables/budget96/rules.mk => keyboards/donutcables/budget96/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 44,6 40,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
SRC = i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/eve/meteor/rules.mk => keyboards/eve/meteor/rules.mk +8 -4
@@ 16,10 16,14 @@
# MCU name
MCU = atmega32a
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
M keyboards/exclusive/e6v2/le_bmc/rules.mk => keyboards/exclusive/e6v2/le_bmc/rules.mk +3 -55
@@ 1,46 1,5 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 12000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-# ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-# F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS = -DDEBUG_LEVEL=0
-
# Bootloader selection
# Teensy halfkay
@@ 48,20 7,10 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
@@ 84,6 33,5 @@ AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
+OPT_DEFS = -DDEBUG_LEVEL=0
SRC += i2c_master.c
-
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/exclusive/e6v2/oe_bmc/rules.mk => keyboards/exclusive/e6v2/oe_bmc/rules.mk +3 -55
@@ 1,46 1,5 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 12000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-# ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-# F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS = -DDEBUG_LEVEL=0
-
# Bootloader selection
# Teensy halfkay
@@ 48,20 7,10 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
@@ 84,6 33,5 @@ AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
+OPT_DEFS = -DDEBUG_LEVEL=0
SRC += i2c_master.c
-
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/facew/rules.mk => keyboards/facew/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 45,7 41,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
SRC = i2c_master.c
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
-
LAYOUTS = 60_ansi
M keyboards/ft/mars80/rules.mk => keyboards/ft/mars80/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 44,7 40,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0
SRC += i2c_master.c
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
-
LAYOUTS = tkl_ansi tkl_iso
M keyboards/gingham/rules.mk => keyboards/gingham/rules.mk +2 -3
@@ 10,9 10,8 @@ MCU = atmega328p
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
-#
-# This uses usbaspbootloader
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = USBasp
# Flash program via avrdude, but default command is not suitable.
M keyboards/gray_studio/hb85/rules.mk => keyboards/gray_studio/hb85/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 43,6 39,3 @@ RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0
SRC += i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/handwired/hnah40/rules.mk => keyboards/handwired/hnah40/rules.mk +9 -1
@@ 1,7 1,15 @@
# MCU name
MCU = atmega328p
-BOOTLOADER = bootloadHID
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = USBasp
# Flash program via avrdude, but default command is not suitable.
# You can use hnah40:default:program
M keyboards/jc65/v32a/rules.mk => keyboards/jc65/v32a/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 45,6 41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/jj40/rules.mk => keyboards/jj40/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# Build Options
@@ 54,7 50,4 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
SRC += i2c_master.c
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
-
LAYOUTS = ortho_4x12 planck_mit
M keyboards/jj4x4/rules.mk => keyboards/jj4x4/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# Build Options
@@ 54,7 50,4 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
SRC += i2c_master.c
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
-
LAYOUTS = ortho_4x4
M keyboards/jj50/keymaps/archetype/rules.mk => keyboards/jj50/keymaps/archetype/rules.mk +8 -15
@@ 16,19 16,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 59,7 55,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c backlight.c
-# programming options
-PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex
-
LAYOUTS = ortho_5x12
M keyboards/jj50/rules.mk => keyboards/jj50/rules.mk +2 -12
@@ 16,14 16,6 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
# Bootloader selection
# Teensy halfkay
@@ 31,7 23,8 @@ F_CPU = 12000000
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 60,7 53,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c backlight.c
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
-
LAYOUTS = ortho_5x12
M keyboards/kbdfans/kbdpad/mk1/rules.mk => keyboards/kbdfans/kbdpad/mk1/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 43,6 39,3 @@ RGBLIGHT_CUSTOM_DRIVER = no
OPT_DEFS = -DDEBUG_LEVEL=0
QUANTUM_LIB_SRC = i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/mechmini/v1/rules.mk => keyboards/mechmini/v1/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# build options
@@ 45,6 41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/mehkee96/rules.mk => keyboards/mehkee96/rules.mk +8 -13
@@ 1,18 1,16 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# Processor frequency.
-F_CPU = 12000000
-
-# Bootloader
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
-
# Build Options
# comment out to disable the options.
#
@@ 30,6 28,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/mt40/rules.mk => keyboards/mt40/rules.mk +8 -15
@@ 1,18 1,14 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 37,8 33,5 @@ OPT_DEFS = -DDEBUG_LEVEL=0
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
-
LAYOUTS = planck_mit
LAYOUTS_HAS_RGB = no
M keyboards/panc60/rules.mk => keyboards/panc60/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 45,7 41,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
SRC = i2c_master.c
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
-
LAYOUTS = 60_ansi 60_hhkb
M keyboards/pearl/rules.mk => keyboards/pearl/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 44,6 40,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
SRC = i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/plaid/rules.mk => keyboards/plaid/rules.mk +3 -15
@@ 7,21 7,9 @@ MCU = atmega328p
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
-#
-# This uses usbaspbootloader
-# BOOTLOADER = atmel-dfu
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = USBasp
# Flash program via avrdude, but default command is not suitable.
# You can use plaid:default:program
M keyboards/singa/rules.mk => keyboards/singa/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 43,6 39,3 @@ RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0
SRC = i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/skog/rules.mk => keyboards/skog/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 50,6 46,3 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c backlight.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/tgr/alice/rules.mk => keyboards/tgr/alice/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 43,6 39,3 @@ RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0
SRC += i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/tgr/jane/rules.mk => keyboards/tgr/jane/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 44,7 40,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0
QUANTUM_LIB_SRC = i2c_master.c
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
-
LAYOUTS = tkl_ansi tkl_iso
M keyboards/unikorn/rules.mk => keyboards/unikorn/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 43,6 39,3 @@ RGBLIGHT_CUSTOM_DRIVER = no
OPT_DEFS = -DDEBUG_LEVEL=0
SRC = i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/winkeyless/bface/rules.mk => keyboards/winkeyless/bface/rules.mk +9 -12
@@ 15,14 15,16 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = bootloadHID
# build options
BOOTMAGIC_ENABLE = no
@@ 37,11 39,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0
-BOOTLOADER = bootloadHID
# custom matrix setup
SRC = i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
-
M keyboards/winkeyless/bmini/rules.mk => keyboards/winkeyless/bmini/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 45,6 41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/winkeyless/bminiex/rules.mk => keyboards/winkeyless/bminiex/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 51,6 47,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c backlight.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/ymd75/rules.mk => keyboards/ymd75/rules.mk +8 -16
@@ 16,19 16,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 56,7 52,3 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c backlight.c
-
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/ymd96/rules.mk => keyboards/ymd96/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 53,6 49,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c backlight.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/ymdk/bface/rules.mk => keyboards/ymdk/bface/rules.mk +10 -2
@@ 16,6 16,16 @@
# MCU name
MCU = atmega32a
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = bootloadHID
+
# build options
BOOTMAGIC_ENABLE = no
MOUSEKEY_ENABLE = yes
@@ 29,5 39,3 @@ RGBLIGHT_ENABLE = no
RGBLIGHT_CUSTOM_DRIVER = no
OPT_DEFS = -DDEBUG_LEVEL=0
-BOOTLOADER = bootloadHID
-
M keyboards/ymdk_np21/rules.mk => keyboards/ymdk_np21/rules.mk +8 -15
@@ 15,19 15,15 @@
# MCU name
MCU = atmega32a
-PROTOCOL = VUSB
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options
@@ 54,6 50,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c backlight.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M quantum/template/avr/rules.mk => quantum/template/avr/rules.mk +2 -4
@@ 1,17 1,16 @@
# MCU name
MCU = atmega32u4
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# If you don't know the bootloader type, then you can specify the
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
# Teensy halfKay 512
@@ 21,7 20,6 @@ BOOTLOADER = atmel-dfu
# USBaspLoader 2048
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change yes to no to disable
#
M quantum/template/ps2avrgb/rules.mk => quantum/template/ps2avrgb/rules.mk +8 -4
@@ 1,10 1,14 @@
# MCU name
MCU = atmega32a
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = bootloadHID
# build options