D keyboards/jj4x4/backlight.c => keyboards/jj4x4/backlight.c +0 -213
@@ 1,213 0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#include "backlight.h"
-#include "quantum.h"
-
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-
-#include "backlight_custom.h"
-#include "breathing_custom.h"
-
-// DEBUG
-#include <stdlib.h>
-#include <stdio.h>
-
-// Port D: digital pins of the AVR chipset
-#define NUMLOCK_PORT (1 << 0) // D0
-#define CAPSLOCK_PORT (1 << 1) // D1
-#define BACKLIGHT_PORT (1 << 4) // D4
-#define SCROLLLOCK_PORT (1 << 6) // D6
-
-#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64
-#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default
-
-#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask
-
-#define PWM_MAX 0xFF
-#define TIMER_TOP 255 // 8 bit PWM
-
-extern backlight_config_t backlight_config;
-
-/**
- * References
- * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
- * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
- * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
- * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
- * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
- */
-
-// @Override
-// turn LEDs on and off depending on USB caps/num/scroll lock states.
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
- if (usb_led & (1 << USB_LED_NUM_LOCK)) {
- // turn on
- DDRD |= NUMLOCK_PORT;
- PORTD |= NUMLOCK_PORT;
- } else {
- // turn off
- DDRD &= ~NUMLOCK_PORT;
- PORTD &= ~NUMLOCK_PORT;
- }
-
- if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
- DDRD |= CAPSLOCK_PORT;
- PORTD |= CAPSLOCK_PORT;
- } else {
- DDRD &= ~CAPSLOCK_PORT;
- PORTD &= ~CAPSLOCK_PORT;
- }
-
- if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
- DDRD |= SCROLLLOCK_PORT;
- PORTD |= SCROLLLOCK_PORT;
- } else {
- DDRD &= ~SCROLLLOCK_PORT;
- PORTD &= ~SCROLLLOCK_PORT;
- }
-}
-
-#ifdef BACKLIGHT_ENABLE
-
-// sets up Timer 1 for 8-bit PWM
-void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
- // default 8 bit mode
- TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
- TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
-
- // clear output compare value A
- // outb(OCR1AH, 0);
- // outb(OCR1AL, 0);
-
- // clear output comparator registers for B
- OCR1BH = 0; // outb(OCR1BH, 0);
- OCR1BL = 0; // outb(OCR1BL, 0);
-}
-
-bool is_init = false;
-void timer1Init(void) {
- // timer1SetPrescaler(TIMER1PRESCALE)
- // set to DIV/64
- (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
-
- // reset TCNT1
- TCNT1H = 0; // outb(TCNT1H, 0);
- TCNT1L = 0; // outb(TCNT1L, 0);
-
- // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
- TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
-
- is_init = true;
-}
-
-void timer1UnInit(void) {
- // set prescaler back to NONE
- (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP
-
- // disable timer overflow interrupt
- TIMSK &= ~_BV(TOIE1); // overflow bit?
-
- setPWM(0);
-
- is_init = false;
-}
-
-
-// handle TCNT1 overflow
-//! Interrupt handler for tcnt1 overflow interrupt
-ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
-{
- // sei();
- // handle breathing here
- #ifdef BACKLIGHT_BREATHING
- if (is_breathing()) {
- custom_breathing_handler();
- }
- #endif
-
- // TODO call user defined function
-}
-
-// enable timer 1 PWM
-// timer1PWMBOn()
-void timer1PWMBEnable(void) {
- // turn on channel B (OC1B) PWM output
- // set OC1B as non-inverted PWM
- TCCR1A |= _BV(COM1B1);
- TCCR1A &= ~_BV(COM1B0);
-}
-
-// disable timer 1 PWM
-// timer1PWMBOff()
-void timer1PWMBDisable(void) {
- TCCR1A &= ~_BV(COM1B1);
- TCCR1A &= ~_BV(COM1B0);
-}
-
-void enableBacklight(void) {
- DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
- PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
-}
-
-void disableBacklight(void) {
- // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
- PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
-}
-
-void startPWM(void) {
- timer1Init();
- timer1PWMBEnable();
- enableBacklight();
-}
-
-void stopPWM(void) {
- timer1UnInit();
- disableBacklight();
- timer1PWMBDisable();
-}
-
-void b_led_init_ports(void) {
- /* turn backlight on/off depending on user preference */
- #if BACKLIGHT_ON_STATE == 0
- // DDRx register: sets the direction of Port D
- // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
- PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
- #else
- DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
- PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
- #endif
-
- timer1PWMSetup();
- startPWM();
-
- #ifdef BACKLIGHT_BREATHING
- breathing_enable();
- #endif
-}
-
-void b_led_set(uint8_t level) {
- if (level > BACKLIGHT_LEVELS) {
- level = BACKLIGHT_LEVELS;
- }
-
- setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
-}
-
-// called every matrix scan
-void b_led_task(void) {
- // do nothing for now
-}
-
-void setPWM(uint16_t xValue) {
- if (xValue > TIMER_TOP) {
- xValue = TIMER_TOP;
- }
- OCR1B = xValue; // timer1PWMBSet(xValue);
-}
-
-#endif // BACKLIGHT_ENABLE
D keyboards/jj4x4/backlight_custom.h => keyboards/jj4x4/backlight_custom.h +0 -15
@@ 1,15 0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifndef BACKLIGHT_CUSTOM_H
-#define BACKLIGHT_CUSTOM_H
-
-#include <avr/pgmspace.h>
-void b_led_init_ports(void);
-void b_led_set(uint8_t level);
-void b_led_task(void);
-void setPWM(uint16_t xValue);
-
-#endif // BACKLIGHT_CUSTOM_H
D keyboards/jj4x4/breathing_custom.h => keyboards/jj4x4/breathing_custom.h +0 -140
@@ 1,140 0,0 @@
-/**
- * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
- * Works in conjunction with `backlight.c`.
- *
- * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
- * handler in `backlight.c` instead of setting up its own timer.
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifdef BACKLIGHT_ENABLE
-#ifdef BACKLIGHT_BREATHING
-
-#include "backlight_custom.h"
-
-#ifndef BREATHING_PERIOD
-#define BREATHING_PERIOD 6
-#endif
-
-#define breathing_min() do {breathing_counter = 0;} while (0)
-#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
-
-// TODO make this share code with quantum.c
-
-#define BREATHING_NO_HALT 0
-#define BREATHING_HALT_OFF 1
-#define BREATHING_HALT_ON 2
-#define BREATHING_STEPS 128
-
-static uint8_t breathing_period = BREATHING_PERIOD;
-static uint8_t breathing_halt = BREATHING_NO_HALT;
-static uint16_t breathing_counter = 0;
-
-static bool breathing = false;
-
-bool is_breathing(void) {
- return breathing;
-}
-
-// See http://jared.geek.nz/2013/feb/linear-led-pwm
-static uint16_t cie_lightness(uint16_t v) {
- if (v <= 5243) // if below 8% of max
- return v / 9; // same as dividing by 900%
- else {
- uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
- // to get a useful result with integer division, we shift left in the expression above
- // and revert what we've done again after squaring.
- y = y * y * y >> 8;
- if (y > 0xFFFFUL) // prevent overflow
- return 0xFFFFU;
- else
- return (uint16_t) y;
- }
-}
-
-void breathing_enable(void) {
- breathing = true;
- breathing_counter = 0;
- breathing_halt = BREATHING_NO_HALT;
- // interrupt already registered
-}
-
-void breathing_pulse(void) {
- if (get_backlight_level() == 0)
- breathing_min();
- else
- breathing_max();
- breathing_halt = BREATHING_HALT_ON;
- // breathing_interrupt_enable();
- breathing = true;
-}
-
-void breathing_disable(void) {
- breathing = false;
- // backlight_set(get_backlight_level());
- b_led_set(get_backlight_level()); // custom implementation of backlight_set()
-}
-
-void breathing_self_disable(void)
-{
- if (get_backlight_level() == 0)
- breathing_halt = BREATHING_HALT_OFF;
- else
- breathing_halt = BREATHING_HALT_ON;
-}
-
-void breathing_toggle(void) {
- if (is_breathing())
- breathing_disable();
- else
- breathing_enable();
-}
-
-void breathing_period_set(uint8_t value)
-{
- if (!value)
- value = 1;
- breathing_period = value;
-}
-
-void breathing_period_default(void) {
- breathing_period_set(BREATHING_PERIOD);
-}
-
-void breathing_period_inc(void)
-{
- breathing_period_set(breathing_period+1);
-}
-
-void breathing_period_dec(void)
-{
- breathing_period_set(breathing_period-1);
-}
-
-/* To generate breathing curve in python:
- * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
- */
-static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-
-// Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) {
- return v / BACKLIGHT_LEVELS * get_backlight_level();
-}
-
-void custom_breathing_handler(void) {
- uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
- // resetting after one period to prevent ugly reset at overflow.
- breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
- uint8_t index = breathing_counter / interval % BREATHING_STEPS;
-
- if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
- ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
- {
- // breathing_interrupt_disable();
- }
-
- setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
-}
-
-#endif // BACKLIGHT_BREATHING
-#endif // BACKLIGHT_ENABLE
M keyboards/jj4x4/config.h => keyboards/jj4x4/config.h +16 -9
@@ 19,7 19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "config_common.h"
-
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
// TODO: share these strings with usbconfig.h
@@ 36,16 35,24 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
+#define BACKLIGHT_PIN D4
#define BACKLIGHT_LEVELS 12
-// #define BACKLIGHT_BREATHING // works, but BL_TOGG might not work
+// #define BACKLIGHT_BREATHING // Requires #4324 to enable hardware pwm for atmega32a
+
+/* RGB underglow */
+// NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
+#define RGBLED_NUM 4
+#define RGBLIGHT_ANIMATIONS
-#define TAPPING_TOGGLE 3
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
#define NO_UART 1
-/* RGB underglow */
-// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
-// The same pin is used on the JJ40, at least.
-#define RGBLED_NUM 5
-#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
-#define RGBLIGHT_ANIMATIONS
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
D keyboards/jj4x4/i2c.c => keyboards/jj4x4/i2c.c +0 -104
@@ 1,104 0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
- uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
- if (bitrate_div >= 16) {
- bitrate_div = (bitrate_div - 16) / 2;
- }
- TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
- // set pull-up resistors on I2C bus pins
- PORTC |= 0b11;
-
- i2c_set_bitrate(400);
-
- // enable TWI (two-wire interface)
- TWCR |= (1 << TWEN);
-
- // enable TWI interrupt and slave address ACK
- TWCR |= (1 << TWIE);
- TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
- // reset TWI control register
- TWCR = 0;
-
- // begin transmission and wait for it to end
- TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
- while (!(TWCR & (1<<TWINT)));
-
- // check if the start condition was successfully transmitted
- if ((TWSR & 0xF8) != TW_START) {
- return 1;
- }
-
- // transmit address and wait
- TWDR = address;
- TWCR = (1<<TWINT) | (1<<TWEN);
- while (!(TWCR & (1<<TWINT)));
-
- // check if the device has acknowledged the READ / WRITE mode
- uint8_t twst = TW_STATUS & 0xF8;
- if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
- return 1;
- }
-
- return 0;
-}
-
-void i2c_stop(void) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
- TWDR = data;
-
- // transmit data and wait
- TWCR = (1<<TWINT) | (1<<TWEN);
- while (!(TWCR & (1<<TWINT)));
-
- if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
- return 1;
- }
-
- return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
- if (i2c_start(address)) {
- return 1;
- }
-
- for (uint16_t i = 0; i < length; i++) {
- if (i2c_write(data[i])) {
- return 1;
- }
- }
-
- i2c_stop();
-
- return 0;
-}
D keyboards/jj4x4/i2c.h => keyboards/jj4x4/i2c.h +0 -25
@@ 1,25 0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif
M keyboards/jj4x4/jj4x4.c => keyboards/jj4x4/jj4x4.c +10 -51
@@ 18,53 18,26 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "jj4x4.h"
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "quantum.h"
+#ifdef RGBLIGHT_ENABLE
-#include "i2c.h"
+#include <string.h>
+#include "i2c_master.h"
+#include "rgblight.h"
-#include "backlight.h"
-#include "backlight_custom.h"
+extern rgblight_config_t rgblight_config;
-// for keyboard subdirectory level init functions
-// @Override
void matrix_init_kb(void) {
+ i2c_init();
// call user level keymaps, if any
matrix_init_user();
}
-
-#ifdef BACKLIGHT_ENABLE
-/// Overrides functions in `quantum.c`
-void backlight_init_ports(void) {
- b_led_init_ports();
-}
-
-void backlight_task(void) {
- b_led_task();
-}
-
-void backlight_set(uint8_t level) {
- b_led_set(level);
-}
-#endif
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
// custom RGB driver
void rgblight_set(void) {
if (!rgblight_config.enable) {
- for (uint8_t i=0; i<RGBLED_NUM; i++) {
- led[i].r = 0;
- led[i].g = 0;
- led[i].b = 0;
- }
+ memset(led, 0, 3 * RGBLED_NUM);
}
- i2c_init();
- i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+ i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
}
bool rgb_init = false;
@@ 72,26 45,12 @@ bool rgb_init = false;
void matrix_scan_kb(void) {
// if LEDs were previously on before poweroff, turn them back on
if (rgb_init == false && rgblight_config.enable) {
- i2c_init();
- i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+ i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
rgb_init = true;
}
rgblight_task();
-#else
-void matrix_scan_kb(void) {
-#endif
matrix_scan_user();
- /* Nothing else for now. */
-}
-
-__attribute__((weak)) // overridable
-void matrix_init_user(void) {
-
}
-
-__attribute__((weak)) // overridable
-void matrix_scan_user(void) {
-
-}
+#endif
M keyboards/jj4x4/jj4x4.h => keyboards/jj4x4/jj4x4.h +8 -2
@@ 19,8 19,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "quantum.h"
-void matrix_init_user(void); // TODO port this to other PS2AVRGB boards
-
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
#define LAYOUT_ortho_4x4( \
K01, K02, K03, K04, \
K11, K12, K13, K14, \
M keyboards/jj4x4/keymaps/default/keymap.c => keyboards/jj4x4/keymaps/default/keymap.c +64 -25
@@ 1,34 1,73 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
#include QMK_KEYBOARD_H
+enum layers {
+ _BASE = 0,
+ _FN1,
+ _FN2,
+};
-#define _QWERTY 0
-
-
+// Defines the keycodes used by our macros in process_record_user
enum custom_keycodes {
- QWERTY = SAFE_RANGE,
+ QMKBEST = SAFE_RANGE,
+ QMKURL
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Qwerty
- * ,---------------------------.
- * | A | B | C | D |
- * +------+------+------+------|
- * | E | F | G | H |
- * +------+------+------+------|
- * | I | J | K | L |
- * +------+------+------+------|
- * | M | N | O | P |
- * ----------------------------'
- */
-[_QWERTY] = LAYOUT_ortho_4x4( \
- KC_A, KC_B, KC_C, KC_D, \
- KC_E, KC_F, KC_G, KC_H, \
- KC_I, KC_J, KC_K, KC_L, \
- KC_M, KC_N, KC_O, KC_P \
-),
-};
-// Loop
-void matrix_scan_user(void) {
- // Empty
+ [_BASE] = LAYOUT_ortho_4x4(
+ KC_PGUP, KC_HOME, KC_UP, KC_END , \
+ KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, \
+ MO(_FN2), KC_VOLU, KC_MPLY, KC_MPRV, \
+ MO(_FN1), KC_VOLD, KC_MUTE, KC_MNXT \
+ ),
+ [_FN1] = LAYOUT_ortho_4x4(
+ KC_ESC, KC_P7, KC_P8, KC_P9, \
+ KC_TAB, KC_P4, KC_P5, KC_P6, \
+ KC_ENT, KC_P1, KC_P2, KC_P3, \
+ _______, KC_P0, KC_P0, KC_DOT \
+ ),
+ [_FN2] = LAYOUT_ortho_4x4(
+ RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
+ RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, \
+ _______, _______, _______, RESET, \
+ BL_STEP, _______, QMKBEST, QMKURL \
+ )
+
};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QMKBEST:
+ if (record->event.pressed) {
+ // when keycode QMKBEST is pressed
+ SEND_STRING("QMK is the best thing ever!");
+ } else {
+ // when keycode QMKBEST is released
+ }
+ break;
+ case QMKURL:
+ if (record->event.pressed) {
+ // when keycode QMKURL is pressed
+ SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+ } else {
+ // when keycode QMKURL is released
+ }
+ break;
+ }
+ return true;
+}
M keyboards/jj4x4/rules.mk => keyboards/jj4x4/rules.mk +22 -20
@@ 30,27 30,29 @@ F_CPU = 12000000
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = bootloadHID
-# build options
-BOOTMAGIC_ENABLE = no
-MOUSEKEY_ENABLE = no
-EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = no
-COMMAND_ENABLE = yes
-
-BACKLIGHT_ENABLE = yes
-BACKLIGHT_CUSTOM_DRIVER = yes
-
-RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
-
-KEY_LOCK_ENABLE = yes
-
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC = i2c.c backlight.c
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+RGBLIGHT_CUSTOM_DRIVER = yes
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
+
+SRC += i2c_master.c
# programming options
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/jj4x4/usbconfig.h => keyboards/jj4x4/usbconfig.h +2 -2
@@ 252,8 252,8 @@ section at the end of this file).
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
* details.
*/
-#define USB_CFG_DEVICE_NAME 'j', 'j', '4', '0'
-#define USB_CFG_DEVICE_NAME_LEN 4
+#define USB_CFG_DEVICE_NAME 'j', 'j', '4', 'x', '4'
+#define USB_CFG_DEVICE_NAME_LEN 5
/* Same as above for the device name. If you don't want a device name, undefine
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
* you use a shared VID/PID.