@@ 16,16 16,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef RGB_MATRIX_ENABLE
-#include "arm_atsam_protocol.h"
-#include "led.h"
-#include "rgb_matrix.h"
-#include <string.h>
-#include <math.h>
+# include "arm_atsam_protocol.h"
+# include "led.h"
+# include "rgb_matrix.h"
+# include <string.h>
+# include <math.h>
-#ifdef USE_MASSDROP_CONFIGURATOR
+# ifdef USE_MASSDROP_CONFIGURATOR
__attribute__((weak)) led_instruction_t led_instructions[] = {{.end = 1}};
static void md_rgb_matrix_config_override(int i);
-#endif // USE_MASSDROP_CONFIGURATOR
+# endif // USE_MASSDROP_CONFIGURATOR
void SERCOM1_0_Handler(void) {
if (SERCOM1->I2CM.INTFLAG.bit.ERROR) {
@@ 59,17 59,17 @@ RGB led_buffer[ISSI3733_LED_COUNT];
uint8_t gcr_desired;
uint8_t gcr_actual;
uint8_t gcr_actual_last;
-#ifdef USE_MASSDROP_CONFIGURATOR
+# ifdef USE_MASSDROP_CONFIGURATOR
uint8_t gcr_breathe;
float breathe_mult;
float pomod;
-#endif
+# endif
-#define ACT_GCR_NONE 0
-#define ACT_GCR_INC 1
-#define ACT_GCR_DEC 2
+# define ACT_GCR_NONE 0
+# define ACT_GCR_INC 1
+# define ACT_GCR_DEC 2
-#define LED_GCR_STEP_AUTO 2
+# define LED_GCR_STEP_AUTO 2
static uint8_t gcr_min_counter;
static uint8_t v_5v_cat_hit;
@@ 79,11 79,11 @@ void gcr_compute(void) {
uint8_t action = ACT_GCR_NONE;
uint8_t gcr_use = gcr_desired;
-#ifdef USE_MASSDROP_CONFIGURATOR
+# ifdef USE_MASSDROP_CONFIGURATOR
if (led_animation_breathing) {
gcr_use = gcr_breathe;
}
-#endif
+# endif
// If the 5v takes a catastrophic hit, disable the LED drivers briefly, assert auto gcr mode, min gcr and let the auto take over
if (v_5v < V5_CAT) {
@@ 151,7 151,7 @@ void gcr_compute(void) {
gcr_actual -= LED_GCR_STEP_AUTO;
gcr_min_counter = 0;
-#ifdef USE_MASSDROP_CONFIGURATOR
+# ifdef USE_MASSDROP_CONFIGURATOR
// If breathe mode is active, the top end can fluctuate if the host can not supply enough current
// So set the breathe GCR to where it becomes stable
if (led_animation_breathing == 1) {
@@ 160,7 160,7 @@ void gcr_compute(void) {
// and the same would happen maybe one or two more times. Therefore I'm favoring
// powering through one full breathe and letting gcr settle completely
}
-#endif
+# endif
}
}
}
@@ 199,13 199,13 @@ void md_rgb_matrix_prepare(void) {
static void led_set_one(int i, uint8_t r, uint8_t g, uint8_t b) {
if (i < ISSI3733_LED_COUNT) {
-#ifdef USE_MASSDROP_CONFIGURATOR
+# ifdef USE_MASSDROP_CONFIGURATOR
md_rgb_matrix_config_override(i);
-#else
+# else
led_buffer[i].r = r;
led_buffer[i].g = g;
led_buffer[i].b = b;
-#endif
+# endif
}
}
@@ 229,15 229,15 @@ static void init(void) {
}
static void flush(void) {
-#ifdef USE_MASSDROP_CONFIGURATOR
+# ifdef USE_MASSDROP_CONFIGURATOR
if (!led_enabled) {
return;
} // Prevent calculations and I2C traffic if LED drivers are not enabled
-#else
+# else
if (!sr_exp_data.bit.SDB_N) {
return;
} // Prevent calculations and I2C traffic if LED drivers are not enabled
-#endif
+# endif
// Wait for previous transfer to complete
while (i2c_led_q_running) {
@@ 250,7 250,7 @@ static void flush(void) {
*led_map[i].rgb.b = led_buffer[i].b;
}
-#ifdef USE_MASSDROP_CONFIGURATOR
+# ifdef USE_MASSDROP_CONFIGURATOR
breathe_mult = 1;
if (led_animation_breathing) {
@@ 276,7 276,7 @@ static void flush(void) {
pomod = (uint32_t)pomod % 10000;
pomod /= 100.0f;
-#endif // USE_MASSDROP_CONFIGURATOR
+# endif // USE_MASSDROP_CONFIGURATOR
uint8_t drvid;
@@ 296,21 296,21 @@ void md_rgb_matrix_indicators(void) {
if (kbled && rgb_matrix_config.enable) {
for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) {
if (
-#if USB_LED_NUM_LOCK_SCANCODE != 255
+# if USB_LED_NUM_LOCK_SCANCODE != 255
(led_map[i].scan == USB_LED_NUM_LOCK_SCANCODE && (kbled & (1 << USB_LED_NUM_LOCK))) ||
-#endif // NUM LOCK
-#if USB_LED_CAPS_LOCK_SCANCODE != 255
+# endif // NUM LOCK
+# if USB_LED_CAPS_LOCK_SCANCODE != 255
(led_map[i].scan == USB_LED_CAPS_LOCK_SCANCODE && (kbled & (1 << USB_LED_CAPS_LOCK))) ||
-#endif // CAPS LOCK
-#if USB_LED_SCROLL_LOCK_SCANCODE != 255
+# endif // CAPS LOCK
+# if USB_LED_SCROLL_LOCK_SCANCODE != 255
(led_map[i].scan == USB_LED_SCROLL_LOCK_SCANCODE && (kbled & (1 << USB_LED_SCROLL_LOCK))) ||
-#endif // SCROLL LOCK
-#if USB_LED_COMPOSE_SCANCODE != 255
+# endif // SCROLL LOCK
+# if USB_LED_COMPOSE_SCANCODE != 255
(led_map[i].scan == USB_LED_COMPOSE_SCANCODE && (kbled & (1 << USB_LED_COMPOSE))) ||
-#endif // COMPOSE
-#if USB_LED_KANA_SCANCODE != 255
+# endif // COMPOSE
+# if USB_LED_KANA_SCANCODE != 255
(led_map[i].scan == USB_LED_KANA_SCANCODE && (kbled & (1 << USB_LED_KANA))) ||
-#endif // KANA
+# endif // KANA
(0)) {
if (rgb_matrix_get_flags() & LED_FLAG_INDICATOR) {
led_buffer[i].r = 255 - led_buffer[i].r;
@@ 328,7 328,7 @@ const rgb_matrix_driver_t rgb_matrix_driver = {.init = init, .flush = flush, .se
= Legacy Lighting Support =
==============================================================================*/
-#ifdef USE_MASSDROP_CONFIGURATOR
+# ifdef USE_MASSDROP_CONFIGURATOR
// Ported from Massdrop QMK GitHub Repo
// TODO?: wire these up to keymap.c
@@ 470,5 470,5 @@ static void md_rgb_matrix_config_override(int i) {
led_buffer[i].b = (uint8_t)bo;
}
-#endif // USE_MASSDROP_CONFIGURATOR
-#endif // RGB_MATRIX_ENABLE>
\ No newline at end of file
+# endif // USE_MASSDROP_CONFIGURATOR
+#endif // RGB_MATRIX_ENABLE<
\ No newline at end of file
@@ 16,9 16,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef RGB_MATRIX_ENABLE
-#ifdef USE_MASSDROP_CONFIGURATOR
+# ifdef USE_MASSDROP_CONFIGURATOR
-# include "md_rgb_matrix.h"
+# include "md_rgb_matrix.h"
// Teal <-> Salmon
led_setup_t leds_teal_salmon[] = {
@@ 97,5 97,5 @@ void *led_setups[] = {leds_rainbow_s, leds_rainbow_ns, leds_teal_salmon, leds_ye
const uint8_t led_setups_count = sizeof(led_setups) / sizeof(led_setups[0]);
-#endif // USE_MASSDROP_CONFIGURATOR
-#endif // RGB_MATRIX_ENABLE>
\ No newline at end of file
+# endif // USE_MASSDROP_CONFIGURATOR
+#endif // RGB_MATRIX_ENABLE<
\ No newline at end of file