D keyboards/ai03/soyuz/keymaps/mrsendyyk/readme.md => keyboards/ai03/soyuz/keymaps/mrsendyyk/readme.md +0 -19
@@ 1,19 0,0 @@
-# Sendy YK's Numpad 5x4 Layout and Keymap
-
-[https://mr.sendyyk.com](https://mr.sendyyk.com)
-
-## Numpad 5x4 Layout
-
-
-
-## Keymap
-
-
-
-## Build The Firmware
-
-You will need to build the firmware. To do so go to your terminal window and run the compile command:
-
- qmk compile -kb ai03/soyuz -km mrsendyyk
-
-See [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs).
D keyboards/dz60/keymaps/mrsendyyk/keymap.c => keyboards/dz60/keymaps/mrsendyyk/keymap.c +0 -98
@@ 1,98 0,0 @@
-/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com).
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-enum layer_names {
- _BASE, // Default Layer
- _FN, // Fn Layer 1
- _SETTINGS // Fn Layer 2
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- // Default Layer
- [_BASE] = LAYOUT_60_ansi_arrow(
- KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, LT(2, KC_RALT), LT(1, KC_RCTL), KC_LEFT, KC_DOWN, KC_RGHT
- ),
- // Fn Layer 1
- [_FN] = LAYOUT_60_ansi_arrow(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
- KC_BRIU, KC_TRNS, KC_TRNS, KC_END, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT,
- KC_BRID, KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE,
- KC_VOLU, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_TRNS,
- KC_VOLD, KC_MRWD, KC_MFFD, KC_MPLY, KC_MSTP, KC_TRNS, KC_MPRV, KC_PGDN, KC_MNXT
- ),
- // Fn Layer 2
- [_SETTINGS] = LAYOUT_60_ansi_arrow(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
- )
-};
-
-void keyboard_post_init_user(void) {
- rgblight_enable_noeeprom();
- rgblight_sethsv_noeeprom(0, 0, 0);
-}
-
-// RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator
-void update_led(void) {
- // Num Lock Indicator
- if (host_keyboard_led_state().num_lock) {
- rgblight_setrgb(225, 8, 0);
- }
- // Scroll Lock Indicator
- if (host_keyboard_led_state().scroll_lock) {
- rgblight_setrgb(255, 110, 0);
- }
-}
-
-void led_set_user(uint8_t usb_led) {
- // Caps Lock Indicator
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- writePinLow(B2);
- rgblight_setrgb(100, 255, 100);
- }
- // Layer Indicator
- else {
- switch (get_highest_layer(layer_state)) {
- // Fn Layer 1 Indicator
- case _FN:
- rgblight_setrgb(100, 255, 100);
- break;
- // Fn Layer 2 Indicator
- case _SETTINGS:
- rgblight_setrgb(100, 255, 100);
- break;
- // Default Layer Indicator
- case _BASE:
- rgblight_setrgb(0, 0, 0);
- break;
- }
- update_led();
- }
-}
-
-layer_state_t layer_state_set_user(layer_state_t state) {
- update_led();
- return state;
-}
D keyboards/dz60/keymaps/mrsendyyk/readme.md => keyboards/dz60/keymaps/mrsendyyk/readme.md +0 -85
@@ 1,85 0,0 @@
-# Sendy YK's 60% ANSI Arrow Layout and Keymap
-
-[https://mr.sendyyk.com](https://mr.sendyyk.com)
-
-## 60% ANSI Arrow Layout
-
-
-
-## Keymap
-
-### Default Layer
-
-
-
-### Fn Layer 1
-
-Press and hold *right* **Ctrl** key.
-
-
-
-### Fn Layer 2
-
-Press and hold *right* **Alt** key.
-
-
-
-### RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator
-
-#### Caps Lock Indicator
-
-```c
- // Caps Lock Indicator
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- writePinLow(B2);
- rgblight_setrgb(100, 255, 100);
- }
-```
-
-#### Num Lock Indicator
-
-```c
- // Num Lock Indicator
- if (host_keyboard_led_state().num_lock) {
- rgblight_setrgb(225, 8, 0);
- }
-```
-
-#### Scroll Lock Indicator
-```c
- // Scroll Lock Indicator
- if (host_keyboard_led_state().scroll_lock) {
- rgblight_setrgb(255, 110, 0);
- }
-```
-
-#### Layer Indicator
-
-```c
- // Layer Indicator
- else {
- switch (get_highest_layer(layer_state)) {
- // Fn Layer 1 Indicator
- case _FN:
- rgblight_setrgb(100, 255, 100);
- break;
- // Fn Layer 2 Indicator
- case _SETTINGS:
- rgblight_setrgb(100, 255, 100);
- break;
- // Default Layer Indicator
- case _BASE:
- rgblight_setrgb(0, 0, 0);
- break;
- }
- update_led();
- }
-```
-
-## Build The Firmware
-
-You will need to build the firmware. To do so go to your terminal window and run the compile command:
-
- qmk compile -kb dz60 -km mrsendyyk
-
-See [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs).
D => +0 -6
@@ 1,6 0,0 @@
[{a:7},"","","","","","","","","","","","","",{w:2},""],
[{w:1.5},"","","","","","","","","","","","","",{w:1.5},""],
[{w:1.75},"","","","","","","","","","","","",{w:2.25},""],
[{w:2.25},"","","","","","","","","","",{w:1.75},"","",""],
[{w:1.25},"",{w:1.25},"",{w:1.25},"",{w:6.25},"","","","","",""]
\ No newline at end of file
M => +11 -4
@@ 1,4 1,5 @@
/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com).
/*
* Copyright (C) 2020 Sendy YK <mr@sendyyk.com>.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ 13,7 14,13 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
/*
* 60% ANSI Arrow Keyboard Layout and Keymap
* with RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator
* by Sendy YK <https://mr.sendyyk.com>.
*/
#include QMK_KEYBOARD_H
enum layer_names {
@@ 22,7 29,7 @@ enum layer_names {
_SETTINGS // Fn Layer 2
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// Default Layer
[_BASE] = LAYOUT_60_ansi_arrow(
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
@@ 73,7 80,7 @@ void led_set_user(uint8_t usb_led) {
rgblight_setrgb(100, 255, 100);
}
// Layer Indicator
else {
else {
switch (get_highest_layer(layer_state)) {
// Fn Layer 1 Indicator
case _FN:
M => +12 -9
@@ 1,28 1,28 @@
# Sendy YK's 60% ANSI Arrow Layout and Keymap
[https://mr.sendyyk.com](https://mr.sendyyk.com)
60% ANSI Arrow keyboard layout and keymap with RGB lighting/LED/underglow as Caps Lock, Num Lock, Scroll Lock, and layer indicator by [Sendy YK](https://mr.sendyyk.com).
## 60% ANSI Arrow Layout
## Keymap
### Default Layer
### Fn Layer 1
Press and hold *right* **Ctrl** key.
### Fn Layer 2
Press and hold *right* **Alt** key.
### RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator
@@ 57,7 57,7 @@ Press and hold *right* **Alt** key.
```c
// Layer Indicator
else {
else {
switch (get_highest_layer(layer_state)) {
// Fn Layer 1 Indicator
case _FN:
@@ 78,8 78,11 @@ Press and hold *right* **Alt** key.
## Build The Firmware
You will need to build the firmware. To do so go to your terminal window and run the compile command:
Make example for keyboard (after setting up your build environment):
qmk compile -kb dz60 -km mrsendyyk
make <keyboard_folder>:mrsendyyk
See [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs).
More information:
* [Setting Up Your QMK Environment](https://docs.qmk.fm/#/getting_started_build_tools)
* [More Detailed make Instructions](https://docs.qmk.fm/#/getting_started_make_guide)
* [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs)
M => +1 -1
@@ 1,1 1,1 @@
USER_NAME := mrsendyyk
\ No newline at end of file
USER_NAME := mrsendyyk
D => +0 -94
@@ 1,94 0,0 @@
# 60_ansi_arrow
This is the 60% ANSI Arrow keyboard layout.
## Requirements
### 1. Layout Defined
A keyboard's `.h` file needs to have `LAYOUT_60_ansi_arrow` defined
```c
#define LAYOUT_60_ansi_arrow( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
k10, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3c, k3d, k3e, \
k40, k41, k43, k46, k4a, k4b, k4c, k4d, k4e \
) { \
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e }, \
{ k10, KC_NO, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e }, \
{ k20, KC_NO, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO }, \
{ k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, KC_NO, k3c, k3d, k3e }, \
{ k40, k41, KC_NO, k43, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d, k4e } \
}
```
### 2. Configuring rules.mk
`rules.mk` needs to have the following line:
LAYOUTS = 60_ansi_arrow
### 3. Defining a Keymap
A keymap must be defined at
qmk_firmware/layouts/community/60_ansi_arrow/yourfoldername/keymap.c
This keymap must have a `LAYOUT_60_ansi_arrow` layout defined.
```c
#include QMK_KEYBOARD_H
enum layer_names {
_BASE, // Default Layer
_FN, // Fn Layer 1
_SETTINGS // Fn Layer 2
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// Default Layer
[_BASE] = LAYOUT_60_ansi_arrow(
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, LT(2, KC_RALT), LT(1, KC_RCTL), KC_LEFT, KC_DOWN, KC_RGHT
),
// Fn Layer 1
[_FN] = LAYOUT_60_ansi_arrow(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
KC_BRIU, KC_TRNS, KC_TRNS, KC_END, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT,
KC_BRID, KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE,
KC_VOLU, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_TRNS,
KC_VOLD, KC_MRWD, KC_MFFD, KC_MPLY, KC_MSTP, KC_TRNS, KC_MPRV, KC_PGDN, KC_MNXT
),
// Fn Layer 2
[_SETTINGS] = LAYOUT_60_ansi_arrow(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};
```
### Default Layer
### Fn Layer 1
Press and hold *right* **Ctrl** key.
### Fn Layer 2
Press and hold *right* **Alt** key.
R keyboards/ai03/soyuz/keymaps/mrsendyyk/keymap.c => +4 -1
@@ 1,4 1,5 @@
-/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com).
+/*
+ * Copyright (C) 2020 Sendy YK <mr@sendyyk.com>.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ 14,6 15,8 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
+// Number Pad 5x4 Layout and Keymap by Sendy YK <https://mr.sendyyk.com>.
+
#include QMK_KEYBOARD_H
enum layer_names {
A => +22 -0
@@ 0,0 1,22 @@
# Sendy YK's Numpad 5x4 Layout and Keymap
Number Pad 5x4 layout and keymap by [Sendy YK](https://mr.sendyyk.com).
## Numpad 5x4 Layout
## Keymap
## Build The Firmware
Make example for keyboard (after setting up your build environment):
make <keyboard_folder>:mrsendyyk
More information:
* [Setting Up Your QMK Environment](https://docs.qmk.fm/#/getting_started_build_tools)
* [More Detailed make Instructions](https://docs.qmk.fm/#/getting_started_make_guide)
* [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs)
A => +1 -0
@@ 0,0 1,1 @@
USER_NAME := mrsendyyk
M layouts/default/60_ansi_arrow/default_60_ansi_arrow/keymap.c => layouts/default/60_ansi_arrow/default_60_ansi_arrow/keymap.c +5 -2
@@ 1,4 1,5 @@
-/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com).
+/*
+ * Copyright (C) 2020 Sendy YK <mr@sendyyk.com>.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ 14,6 15,8 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
+// Default 60% ANSI Arrow Keyboard Layout and Keymap by Sendy YK <https://mr.sendyyk.com>.
+
#include QMK_KEYBOARD_H
enum layer_names {
@@ 22,7 25,7 @@ enum layer_names {
_SETTINGS // Fn Layer 2
};
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// Default Layer
[_BASE] = LAYOUT_60_ansi_arrow(
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
M layouts/default/60_ansi_arrow/info.json => layouts/default/60_ansi_arrow/info.json +1 -1
@@ 1,7 1,7 @@
{
"keyboard_name": "60% ANSI Arrow Layout",
"url": "https://mr.sendyyk.com",
- "maintainer": "Sendy YK",
+ "maintainer": "Sendy YK <mr@sendyyk.com>",
"width": 15,
"height": 5,
"layouts": {
M layouts/default/60_ansi_arrow/readme.md => layouts/default/60_ansi_arrow/readme.md +17 -4
@@ 1,23 1,36 @@
# 60_ansi_arrow and Keymap
+Default 60% ANSI Arrow keyboard layout and keymap by [Sendy YK](https://mr.sendyyk.com).
+
## 60% ANSI Arrow Layout
-
+
## Keymap
### Default Layer
-
+
### Fn Layer 1
Press and hold *right* **Ctrl** key.
-
+
### Fn Layer 2
Press and hold *right* **Alt** key.
-
+
+
+## Build The Firmware
+
+Make example for keyboard (after setting up your build environment):
+
+ make <keyboard_folder>:default_60_ansi_arrow
+
+More information:
+* [Setting Up Your QMK Environment](https://docs.qmk.fm/#/getting_started_build_tools)
+* [More Detailed make Instructions](https://docs.qmk.fm/#/getting_started_make_guide)
+* [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs)