A keyboards/adpenrose/obi/config.h => keyboards/adpenrose/obi/config.h +68 -0
@@ 0,0 1,68 @@
+// Copyright 2022 Arturo Avila (@ADPenrose)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F4, F5, C7, C6 }
+#define MATRIX_COL_PINS { F6, B7, B6, B4, B5, D6, D5, D3, D7, D4, D2, D1, D0, B0 }
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*Rotary encoder - set the resolution fitting your encoder.
+Most will need a value of 4. If 1 encoder click results in 2 keycodes sent
+increase the value. If you need 2 clicks for 1 keycode, decrease*/
+#define ENCODER_RESOLUTION 4
+#define ENCODERS_PAD_A { F1 }
+#define ENCODERS_PAD_B { F0 }
+#define TAP_CODE_DELAY 10
+
+/* Underglow options: */
+#define RGB_DI_PIN F7
+#ifdef RGB_DI_PIN
+# define RGBLED_NUM 16
+# define RGBLIGHT_HUE_STEP 8
+# define RGBLIGHT_SAT_STEP 8
+# define RGBLIGHT_VAL_STEP 8
+# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+# define RGBLIGHT_EFFECT_BREATHING
+# define RGBLIGHT_EFFECT_RAINBOW_MOOD
+# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+# define RGBLIGHT_EFFECT_SNAKE
+# define RGBLIGHT_EFFECT_KNIGHT
+# define RGBLIGHT_EFFECT_CHRISTMAS
+# define RGBLIGHT_EFFECT_STATIC_GRADIENT
+# define RGBLIGHT_EFFECT_RGB_TEST
+# define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+
A keyboards/adpenrose/obi/info.json => keyboards/adpenrose/obi/info.json +70 -0
@@ 0,0 1,70 @@
+{
+ "manufacturer": "ADPenrose",
+ "keyboard_name": "Obi",
+ "maintainer": "Arturo Avila",
+ "usb": {
+ "device_version": "1.0.0",
+ "pid": "0x0002",
+ "vid": "0x4450"
+ },
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [
+ {"label":"F1", "x":0, "y":0},
+ {"label":"Tab", "x":1.25, "y":0, "w":1.5},
+ {"label":"Q", "x":2.75, "y":0},
+ {"label":"W", "x":3.75, "y":0},
+ {"label":"E", "x":4.75, "y":0},
+ {"label":"R", "x":5.75, "y":0},
+ {"label":"T", "x":6.75, "y":0},
+ {"label":"Y", "x":7.75, "y":0},
+ {"label":"U", "x":8.75, "y":0},
+ {"label":"I", "x":9.75, "y":0},
+ {"label":"O", "x":10.75, "y":0},
+ {"label":"P", "x":11.75, "y":0},
+ {"label":"{", "x":12.75, "y":0},
+ {"label":"Backspace", "x":13.75, "y":0, "w":1.5},
+
+ {"label":"F2", "x":0, "y":1},
+ {"label":"Caps Lock", "x":1.25, "y":1, "w":1.75},
+ {"label":"A", "x":3, "y":1},
+ {"label":"S", "x":4, "y":1},
+ {"label":"D", "x":5, "y":1},
+ {"label":"F", "x":6, "y":1},
+ {"label":"G", "x":7, "y":1},
+ {"label":"H", "x":8, "y":1},
+ {"label":"J", "x":9, "y":1},
+ {"label":"K", "x":10, "y":1},
+ {"label":"L", "x":11, "y":1},
+ {"label":":", "x":12, "y":1},
+ {"label":"Enter", "x":13, "y":1, "w":2.25},
+
+ {"label":"F3", "x":0, "y":2},
+ {"label":"Shift", "x":1.25, "y":2, "w":2.25},
+ {"label":"Z", "x":3.5, "y":2},
+ {"label":"X", "x":4.5, "y":2},
+ {"label":"C", "x":5.5, "y":2},
+ {"label":"V", "x":6.5, "y":2},
+ {"label":"B", "x":7.5, "y":2},
+ {"label":"N", "x":8.5, "y":2},
+ {"label":"M", "x":9.5, "y":2},
+ {"label":"<", "x":10.5, "y":2},
+ {"label":"Shift", "x":11.5, "y":2, "w":1.75},
+ {"label":"Up", "x":13.25, "y":2},
+ {"label":"?", "x":14.25, "y":2},
+
+ {"label":"F4", "x":0, "y":3},
+ {"label":"Ctrl", "x":1.25, "y":3, "w":1.25},
+ {"label":"Win", "x":2.5, "y":3},
+ {"label":"Alt", "x":3.5, "y":3, "w":1.25},
+ {"label":"Spacebar", "x":4.75, "y":3, "w":2.25},
+ {"label":"Spacebar", "x":7, "y":3, "w":1.25},
+ {"label":"Spacebar", "x":8.25, "y":3, "w":2.75},
+ {"label":"Alt", "x":11, "y":3, "w":1.25},
+ {"label":"Left", "x":12.25, "y":3},
+ {"label":"Down", "x":13.25, "y":3},
+ {"label":"Right", "x":14.25, "y":3}
+ ]
+ }
+ }
+}
A keyboards/adpenrose/obi/keymaps/default/keymap.c => keyboards/adpenrose/obi/keymaps/default/keymap.c +41 -0
@@ 0,0 1,41 @@
+// Copyright 2022 Arturo Avila (@ADPenrose)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Base */
+ [0] = LAYOUT_all(
+ KC_ESC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC,
+ KC_MUTE, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
+ KC_VOLU, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_RSFT, KC_UP, KC_SLSH,
+ KC_VOLD, KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_RIGHT
+ ),
+ [1] = LAYOUT_all(
+ KC_DEL, KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
+ KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, KC_BSLS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DOT, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+ [2] = LAYOUT_all(
+ KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_RBRC,
+ KC_TRNS, QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+ [3] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ )
+};
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
+ [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+ [1] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+ [2] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+ [3] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS) }
+};
+#endif
A keyboards/adpenrose/obi/keymaps/default/rules.mk => keyboards/adpenrose/obi/keymaps/default/rules.mk +1 -0
@@ 0,0 1,1 @@
+ENCODER_MAP_ENABLE = yes
A keyboards/adpenrose/obi/keymaps/via/keymap.c => keyboards/adpenrose/obi/keymaps/via/keymap.c +41 -0
@@ 0,0 1,41 @@
+// Copyright 2022 Arturo Avila (@ADPenrose)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Base */
+ [0] = LAYOUT_all(
+ KC_ESC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC,
+ KC_MUTE, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
+ KC_VOLU, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_RSFT, KC_UP, KC_SLSH,
+ KC_VOLD, KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_RIGHT
+ ),
+ [1] = LAYOUT_all(
+ KC_DEL, KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
+ KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, KC_BSLS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DOT, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+ [2] = LAYOUT_all(
+ KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_RBRC,
+ KC_TRNS, QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+ [3] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ )
+};
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
+ [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+ [1] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+ [2] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+ [3] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS) }
+};
+#endif
A keyboards/adpenrose/obi/keymaps/via/rules.mk => keyboards/adpenrose/obi/keymaps/via/rules.mk +3 -0
@@ 0,0 1,3 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
+ENCODER_MAP_ENABLE = yes
A keyboards/adpenrose/obi/obi.c => keyboards/adpenrose/obi/obi.c +5 -0
@@ 0,0 1,5 @@
+// Copyright 2022 Arturo Avila (@ADPenrose)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "obi.h"
+
A keyboards/adpenrose/obi/obi.h => keyboards/adpenrose/obi/obi.h +26 -0
@@ 0,0 1,26 @@
+// Copyright 2022 Arturo Avila (@ADPenrose)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2C, K2D, \
+ K30, K31, K32, K33, K35, K36, K37, K3A, K3B, K3C, K3D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, KC_NO, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, KC_NO, K2C, K2D }, \
+ { K30, K31, K32, K33, KC_NO, K35, K36, K37, KC_NO, KC_NO, K3A, K3B, K3C, K3D } \
+}
A keyboards/adpenrose/obi/readme.md => keyboards/adpenrose/obi/readme.md +29 -0
@@ 0,0 1,29 @@
+# Obi
+
+
+
+A 40% keyboard inspired by the TMOv2 and Nightmare boards.
+
+# General info
+
+* Keyboard Maintainer: [Arturo Avila](https://github.com/ADPenrose)
+* Hardware Supported: Obi v1 PCB
+* Hardware Availability: [Arturo Avila](https://github.com/ADPenrose)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make adpenrose/obi:default
+
+Flashing example for this keyboard:
+
+ make adpenrose/obi:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
A keyboards/adpenrose/obi/rules.mk => keyboards/adpenrose/obi/rules.mk +19 -0
@@ 0,0 1,19 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = no # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+ENCODER_ENABLE = yes # Encoder functionality