M keyboards/crkbd/keymaps/curry/config.h => keyboards/crkbd/keymaps/curry/config.h +1 -17
@@ 6,23 6,7 @@
#define OLED_DISABLE_TIMEOUT
#define TAPPING_TERM_PER_KEY
-#ifdef RGBLIGHT_ENABLE
-# undef RGBLED_NUM
-# define RGBLED_NUM 27
-
-# define RGBLIGHT_HUE_STEP 8
-# define RGBLIGHT_SAT_STEP 8
-# define RGBLIGHT_VAL_STEP 5
-# define RGBLIGHT_LIMIT_VAL 120
-#endif
-
-#ifdef RGB_MATRIX_ENABLE
-# define RGB_MATRIX_KEYPRESSES // reacts to keypresses
-// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
-// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
-// # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
-// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#if defined(RGB_MATRIX_ENABLE)
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
# define RGB_MATRIX_HUE_STEP 8
# define RGB_MATRIX_SAT_STEP 8
M keyboards/crkbd/keymaps/curry/keymap.c => keyboards/crkbd/keymaps/curry/keymap.c +12 -6
@@ 6,10 6,10 @@
K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \
) \
LAYOUT_wrapper( \
- KC_GESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_MINS, \
- M_LCTL, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, M_RALT, \
+ KC_TAB, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_MINS, \
+ MT_ESC, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, KC_QUOT, \
OS_LSFT, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, OS_RSFT, \
- KC_GRV, OS_LALT, SP_LWER, ET_RAIS, KC_BSPC, OS_RGUI \
+ KC_LEAD,OS_LALT, SP_LWER, ET_RAIS, KC_BSPC, KC_RGUI \
)
#define LAYOUT_crkbd_base_wrapper(...) LAYOUT_crkbd_base(__VA_ARGS__)
@@ 32,6 32,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
_________________DVORAK_L3_________________, _________________DVORAK_R3_________________
),
+ [_WORKMAN] = LAYOUT_crkbd_base_wrapper(
+ _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
+ _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
+ _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
+ ),
+
[_MODS] = LAYOUT_wrapper(
_______, ___________________BLANK___________________, ___________________BLANK___________________, _______,
_______, ___________________BLANK___________________, ___________________BLANK___________________, _______,
@@ 40,8 46,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[_LOWER] = LAYOUT_wrapper(
- _______, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_PIPE,
- KC_F11, _________________LOWER_L2__________________, _________________LOWER_R2__________________, KC_F12,
+ KC_F11, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_F12,
+ KC_GRV, _________________LOWER_L2__________________, _________________LOWER_R2__________________, KC_PIPE,
_______, _________________LOWER_L3__________________, _________________LOWER_R3__________________, _______,
_______, _______, _______, _______, _______, _______
),
@@ 54,7 60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[_ADJUST] = LAYOUT_wrapper( \
- KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET,
+ KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RST,
VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST,
MG_NKRO, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, RGB_IDL,
_______, _______, _______, _______, TG_MODS, _______
M keyboards/crkbd/keymaps/curry/rules.mk => keyboards/crkbd/keymaps/curry/rules.mk +12 -19
@@ 2,22 2,15 @@
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
-RGB_MATRIX_ENABLE = WS2812
-TAP_DANCE_ENABLE = yes # Enable Tap Dance.
-OLED_DRIVER_ENABLE = yes
-BOOTLOADER = atmel-dfu
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-SPLIT_TRANSPORT = mirror
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = no
+CONSOLE_ENABLE = no
+COMMAND_ENABLE = no
+
+RGBLIGHT_ENABLE = no
+RGB_MATRIX_ENABLE = WS2812
+
+OLED_DRIVER_ENABLE = yes
+
+BOOTLOADER = atmel-dfu
+SPLIT_TRANSPORT = mirror
M keyboards/lily58/keymaps/curry/config.h => keyboards/lily58/keymaps/curry/config.h +10 -0
@@ 5,3 5,13 @@
#define OLED_DISABLE_TIMEOUT
#define TAPPING_TERM_PER_KEY
+
+#if defined(RGBLIGHT_ENABLE)
+# undef RGBLED_NUM
+# define RGBLED_NUM 27
+
+# define RGBLIGHT_HUE_STEP 8
+# define RGBLIGHT_SAT_STEP 8
+# define RGBLIGHT_VAL_STEP 5
+# define RGBLIGHT_LIMIT_VAL 120
+#endif
M keyboards/lily58/keymaps/curry/keymap.c => keyboards/lily58/keymaps/curry/keymap.c +4 -4
@@ 7,11 7,11 @@
K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A \
) \
LAYOUT_wrapper( \
- KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_GRV, \
- KC_TAB, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, KC_BSLS, \
+ KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_GRV, \
+ KC_TAB, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, KC_BSLS, \
KC_LCTL, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, KC_QUOT, \
OS_LSFT, K31, K32, K33, K34, K35, KC_LBRC, KC_RBRC, K36, K37, K38, K39, K3A, OS_RSFT, \
- OS_LGUI, OS_LALT, LOWER, KC_SPC, KC_ENT, RAISE, KC_BSPC, OS_RGUI \
+ KC_LEAD, OS_LALT, LOWER, KC_SPC, KC_ENT, RAISE, KC_BSPC, OS_RGUI \
)
#define LAYOUT_lily58_base_wrapper(...) LAYOUT_lily58_base(__VA_ARGS__)
@@ 63,7 63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_ADJUST] = LAYOUT_wrapper( \
_______, ___________________BLANK___________________, ___________________BLANK___________________, _______,
- KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET,
+ KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RST,
VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST,
MG_NKRO, _________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, RGB_IDL,
_______, _______, _______, _______, _______, _______, _______, _______
M keyboards/lily58/keymaps/curry/rules.mk => keyboards/lily58/keymaps/curry/rules.mk +12 -17
@@ 2,20 2,15 @@
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
-TAP_DANCE_ENABLE = yes # Enable Tap Dance.
-OLED_DRIVER_ENABLE = yes
-BOOTLOADER = atmel-dfu
-SPLIT_TRANSPORT = mirror
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = no
+CONSOLE_ENABLE = no
+COMMAND_ENABLE = no
+
+RGBLIGHT_ENABLE = no
+RGB_MATRIX_ENABLE = no
+
+OLED_DRIVER_ENABLE = yes
+
+BOOTLOADER = atmel-dfu
+SPLIT_TRANSPORT = mirror
R users/curry/LICENSE.md => users/curry/LICENSE +0 -0
M users/curry/config.h => users/curry/config.h +61 -68
@@ 6,97 6,82 @@
/* Set Polling rate to 1000Hz */
#define USB_POLLING_INTERVAL_MS 1
-#ifdef RGBLIGHT_ENABLE
+#if defined(RGBLIGHT_ENABLE)
# undef RGBLIGHT_ANIMATIONS
-# if defined(__AVR__) && !defined(__AVR_AT90USB1286__)
-# define RGBLIGHT_SLEEP
-# define RGBLIGHT_EFFECT_BREATHING
-# define RGBLIGHT_EFFECT_SNAKE
-# define RGBLIGHT_EFFECT_KNIGHT
-# else
-# define RGBLIGHT_ANIMATIONS
-# endif
+# define RGBLIGHT_SLEEP
+# define RGBLIGHT_EFFECT_BREATHING
+# define RGBLIGHT_EFFECT_SNAKE
+# define RGBLIGHT_EFFECT_KNIGHT
#endif // RGBLIGHT_ENABLE
-#ifdef RGB_MATRIX_ENABLE
-# define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
-// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
+#if defined(RGB_MATRIX_ENABLE)
+# define RGB_MATRIX_KEYPRESSES
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
-// # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-// # define EECONFIG_RGB_MATRIX (uint32_t *)16
-
-# if defined(__AVR__) && !defined(__AVR_AT90USB1286__)
-# define DISABLE_RGB_MATRIX_ALPHAS_MODS
-# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-# define DISABLE_RGB_MATRIX_BREATHING
-# define DISABLE_RGB_MATRIX_BAND_SAT
-# define DISABLE_RGB_MATRIX_BAND_VAL
-# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-# define DISABLE_RGB_MATRIX_CYCLE_ALL
-# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
-# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
+# define RGB_DISABLE_WHEN_USB_SUSPENDED true
+
+# define DISABLE_RGB_MATRIX_ALPHAS_MODS
+# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+# define DISABLE_RGB_MATRIX_BREATHING
+# define DISABLE_RGB_MATRIX_BAND_SAT
+# define DISABLE_RGB_MATRIX_BAND_VAL
+# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+# define DISABLE_RGB_MATRIX_CYCLE_ALL
+# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-# define DISABLE_RGB_MATRIX_DUAL_BEACON
-# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
-# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
-# define DISABLE_RGB_MATRIX_RAINBOW_BEACON
-# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-# define DISABLE_RGB_MATRIX_RAINDROPS
-# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+# define DISABLE_RGB_MATRIX_DUAL_BEACON
+# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
+# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
+# define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+# define DISABLE_RGB_MATRIX_RAINDROPS
+# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP
-# define DISABLE_RGB_MATRIX_DIGITAL_RAIN
-# define DISABLE_RGB_MATRIX_SOLID_REACTIVE
-# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-# define DISABLE_RGB_MATRIX_SPLASH
-# define DISABLE_RGB_MATRIX_MULTISPLASH
-# define DISABLE_RGB_MATRIX_SOLID_SPLASH
-# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
-# endif // AVR
-#endif // RGB_MATRIX_ENABLE
-
-#ifndef ONESHOT_TAP_TOGGLE
+# define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+# define DISABLE_RGB_MATRIX_SPLASH
+# define DISABLE_RGB_MATRIX_MULTISPLASH
+# define DISABLE_RGB_MATRIX_SOLID_SPLASH
+# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#endif // RGB_MATRIX_ENABLE
+
+#if !defined(ONESHOT_TAP_TOGGLE)
# define ONESHOT_TAP_TOGGLE 2
#endif // !ONESHOT_TAP_TOGGLE
-#ifndef ONESHOT_TIMEOUT
+#if !defined(ONESHOT_TIMEOUT)
# define ONESHOT_TIMEOUT 3000
#endif // !ONESHOT_TIMEOUT
-#ifndef QMK_KEYS_PER_SCAN
+#if !defined(QMK_KEYS_PER_SCAN)
# define QMK_KEYS_PER_SCAN 4
#endif // !QMK_KEYS_PER_SCAN
-// this makes it possible to do rolling combos (zx) with keys that
-// convert to other keys on hold (z becomes ctrl when you hold it,
-// and when this option isn't enabled, z rapidly followed by x
-// actually sends Ctrl-x. That's bad.)
#define IGNORE_MOD_TAP_INTERRUPT
#undef PERMISSIVE_HOLD
-//#define TAPPING_FORCE_HOLD
-//#define RETRO_TAPPING
#define FORCE_NKRO
-#ifndef TAPPING_TOGGLE
+#if !defined(TAPPING_TOGGLE)
# define TAPPING_TOGGLE 1
#endif
-#ifdef TAPPING_TERM
+#if defined(TAPPING_TERM)
# undef TAPPING_TERM
#endif // TAPPING_TERM
+
#if defined(KEYBOARD_ergodox_ez)
# define TAPPING_TERM 185
#elif defined(KEYBOARD_crkbd)
@@ 107,12 92,20 @@
#define TAP_CODE_DELAY 5
+#define LEADER_TIMEOUT 250
+#define LEADER_PER_KEY_TIMING
+
/* Disable unused and unneeded features to reduce on firmware size */
-#ifdef LOCKING_SUPPORT_ENABLE
+#if defined(LOCKING_SUPPORT_ENABLE)
# undef LOCKING_SUPPORT_ENABLE
#endif
-#ifdef LOCKING_RESYNC_ENABLE
+
+#if defined(LOCKING_RESYNC_ENABLE)
# undef LOCKING_RESYNC_ENABLE
#endif
+#if defined(OLED_FONT_H)
+# undef OLED_FONT_H
+#endif
+
#define OLED_FONT_H "users/curry/glcdfont.c"
M users/curry/curry.c => users/curry/curry.c +9 -10
@@ 53,15 53,16 @@ void rgb_matrix_update_pwm_buffers(void);
// On RESET, set all RGB to red, shutdown the keymap.
void shutdown_user(void) {
-#ifdef RGBLIGHT_ENABLE
+#if defined(RGBLIGHT_ENABLE)
rgblight_enable_noeeprom();
rgblight_mode_noeeprom(1);
rgblight_setrgb_red();
-#endif // RGBLIGHT_ENABLE
-#ifdef RGB_MATRIX_ENABLE
+#endif
+
+#if defined(RGB_MATRIX_ENABLE)
rgb_matrix_set_color_all(0xFF, 0x00, 0x00);
rgb_matrix_update_pwm_buffers();
-#endif // RGB_MATRIX_ENABLE
+#endif
shutdown_keymap();
}
@@ 77,7 78,7 @@ __attribute__((weak)) void matrix_scan_keymap(void) {}
// No global matrix scan code, so just run keymap's matrix
// scan function
-void matrix_scan_user(void) {
+__attribute__((weak)) void matrix_scan_user(void) {
static bool has_ran_yet;
if (!has_ran_yet) {
has_ran_yet = true;
@@ 96,18 97,16 @@ __attribute__((weak)) layer_state_t layer_state_set_keymap(layer_state_t state)
// On Layer change, run keymap's layer change check
layer_state_t layer_state_set_user(layer_state_t state) {
state = update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
-#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+#if defined(RGBLIGHT_ENABLE)
state = layer_state_set_rgb(state);
-#endif // RGBLIGHT_ENABLE
+#endif
return layer_state_set_keymap(state);
}
__attribute__((weak)) layer_state_t default_layer_state_set_keymap(layer_state_t state) { return state; }
// Runs state check and changes underglow color and animation
-layer_state_t default_layer_state_set_user(layer_state_t state) {
- return default_layer_state_set_keymap(state);
-}
+layer_state_t default_layer_state_set_user(layer_state_t state) { return default_layer_state_set_keymap(state); }
__attribute__((weak)) void led_set_keymap(uint8_t usb_led) {}
M users/curry/curry.h => users/curry/curry.h +10 -4
@@ 1,18 1,23 @@
#pragma once
#include QMK_KEYBOARD_H
-
#include "version.h"
#include "eeprom.h"
#include "wrappers.h"
#include "process_records.h"
-#ifdef TAP_DANCE_ENABLE
+#if defined(TAP_DANCE_ENABLE)
# include "tap_dances.h"
#endif // TAP_DANCE_ENABLE
-#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
-# include "rgb_stuff.h"
+
+#if defined(RGB_MATRIX_ENABLE)
+# include "rgb_matrix_user.h"
#endif
+
+#if defined(RGBLIGHT_ENABLE)
+# include "rgb_lighting_user.h"
+#endif
+
#if defined(KEYBOARD_lily58_rev1) & defined(PROTOCOL_LUFA)
# include "lufa.h"
# include "split_util.h"
@@ 23,6 28,7 @@ enum userspace_layers {
_QWERTY = 0,
_COLEMAK,
_DVORAK,
+ _WORKMAN,
_MODS,
_LOWER,
_RAISE,
M users/curry/glcdfont.c => users/curry/glcdfont.c +1 -10
@@ 1,13 1,4 @@
-#pragma once
-
-#ifdef __AVR__
-# include <avr/io.h>
-# include <avr/pgmspace.h>
-#elif defined(ESP8266)
-# include <pgmspace.h>
-#else
-# define PROGMEM
-#endif
+#include "progmem.h"
// Corne 8x6 font with QMK Firmware Logo
// Online editor: https://helixfonteditor.netlify.com/
A users/curry/leader.c => users/curry/leader.c +24 -0
@@ 0,0 1,24 @@
+#include "curry.h"
+#include "leader.h"
+
+LEADER_EXTERNS();
+
+void matrix_scan_user(void) {
+ static bool has_ran_yet;
+ if (!has_ran_yet) {
+ has_ran_yet = true;
+ startup_user();
+ }
+
+#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+ matrix_scan_rgb();
+#endif // RGBLIGHT_ENABLE
+ LEADER_DICTIONARY() {
+ leading = false;
+ leader_end();
+ SEQ_ONE_KEY(KC_F) { SEND_STRING(SS_LCTL("akf")); } // Select all and format
+ SEQ_ONE_KEY(KC_P) { SEND_STRING(SS_LCTL(SS_LSFT("4"))); } // Screenshot region
+ SEQ_TWO_KEYS(KC_D, KC_D) { SEND_STRING(SS_LCTL("ac")); } // Copy all
+ }
+ matrix_scan_keymap();
+}
A users/curry/leader.h => users/curry/leader.h +3 -0
@@ 0,0 1,3 @@
+#pragma once
+
+void matrix_scan_user(void);
M users/curry/oled.c => users/curry/oled.c +7 -6
@@ 1,6 1,5 @@
#include "curry.h"
-#ifdef OLED_DRIVER_ENABLE
#define KEYLOGGER_LENGTH 5
static uint32_t oled_timer = 0;
static char keylog_str[KEYLOGGER_LENGTH + 1] = {"\n"};
@@ 26,6 25,7 @@ static const char PROGMEM code_to_name[0xFF] = {
' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ' // Fx
};
+// clang-format on
void add_keylog(uint16_t keycode);
oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; }
@@ 49,7 49,7 @@ void add_keylog(uint16_t keycode) {
}
void render_keylogger_status(void) {
- oled_write_P(PSTR("Keys"), false);
+ oled_write_P(PSTR("Keys:"), false);
oled_write(keylog_str, false);
}
@@ 65,6 65,9 @@ void render_default_layer_state(void) {
case _DVORAK:
oled_write_P(PSTR(" DVRK"), false);
break;
+ case _WORKMAN:
+ oled_write_P(PSTR(" WRKM"), false);
+ break;
}
}
@@ 139,11 142,11 @@ void oled_task_user(void) {
oled_off();
return;
}
-# ifndef SPLIT_KEYBOARD
+#if !defined(SPLIT_KEYBOARD)
else {
oled_on();
}
-# endif
+#endif
if (is_keyboard_master()) {
render_status_main(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
} else {
@@ 158,5 161,3 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
}
return true;
}
-
-#endif
M users/curry/process_records.c => users/curry/process_records.c +9 -18
@@ 9,6 9,11 @@ __attribute__((weak)) bool process_record_secrets(uint16_t keycode, keyrecord_t
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
xprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
switch (keycode) {
+ case KC_QWERTY ... KC_WORKMAN:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(keycode - KC_QWERTY);
+ }
+ break;
case KC_MAKE:
if (!record->event.pressed) {
uint8_t temp_mod = mod_config(get_mods());
@@ 19,18 24,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if ((temp_mod | temp_osm) & MOD_MASK_SHIFT) {
send_string_with_delay_P(PSTR(":flash"), TAP_CODE_DELAY);
}
- if ((temp_mod | temp_osm) & MOD_MASK_CTRL) {
- send_string_with_delay_P(PSTR(" -j8 --output-sync"), TAP_CODE_DELAY);
- }
-#ifdef RGB_MATRIX_SPLIT_RIGHT
- send_string_with_delay_P(PSTR(" RGB_MATRIX_SPLIT_RIGHT=yes"), TAP_CODE_DELAY);
-# ifndef OLED_DRIVER_ENABLE
- send_string_with_delay_P(PSTR(" OLED_DRIVER_ENABLE=no"), TAP_CODE_DELAY);
-# endif
-#endif
- send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), TAP_CODE_DELAY);
+ send_string_with_delay_P(PSTR(" -j8 --output-sync\n"), TAP_CODE_DELAY);
}
-
break;
case VRSN: // Prints firmware version
@@ 44,17 39,13 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
copy_paste_timer = timer_read();
} else {
if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) { // Hold, copy
- register_code(KC_LCTL);
- tap_code(KC_C);
- unregister_code(KC_LCTL);
+ tap_code16(LCTL(KC_C));
} else { // Tap, paste
- register_code(KC_LCTL);
- tap_code(KC_V);
- unregister_code(KC_LCTL);
+ tap_code16(LCTL(KC_V));
}
}
break;
-#ifdef UNICODE_ENABLE
+#if defined(UNICODE_ENABLE)
case UC_FLIP: // (ノಠ痊ಠ)ノ彡┻━┻
if (record->event.pressed) {
send_unicode_hex_string("0028 30CE 0CA0 75CA 0CA0 0029 30CE 5F61 253B 2501 253B");
M users/curry/process_records.h => users/curry/process_records.h +22 -40
@@ 1,36 1,29 @@
#pragma once
-#include "curry.h"
-
-#if defined(KEYMAP_SAFE_RANGE)
-# define PLACEHOLDER_SAFE_RANGE KEYMAP_SAFE_RANGE
-#else
-# define PLACEHOLDER_SAFE_RANGE SAFE_RANGE
-#endif
enum userspace_custom_keycodes {
- VRSN = PLACEHOLDER_SAFE_RANGE, // Prints QMK Firmware and board info
- KC_QWERTY, // Sets default layer to QWERTY
- KC_COLEMAK, // Sets default layer to COLEMAK
- KC_DVORAK, // Sets default layer to DVORAK
- KC_MAKE, // Run keyboard's customized make command
- KC_RGB_T, // Toggles RGB Layer Indication mode
- RGB_IDL, // RGB Idling animations
- KC_SECRET_1, // test1
- KC_SECRET_2, // test2
- KC_SECRET_3, // test3
- KC_SECRET_4, // test4
- KC_SECRET_5, // test5
- KC_CCCV, // Hold to copy, tap to paste
- KC_NUKE, // NUCLEAR LAUNCH DETECTED!!!
- UC_FLIP, // (ಠ痊ಠ)┻━┻
- UC_TABL, // ┬─┬ノ( º _ ºノ)
- UC_SHRG, // ¯\_(ツ)_/¯
- UC_DISA, // ಠ_ಠ
+ VRSN = SAFE_RANGE, // Prints QMK Firmware and board info
+ KC_QWERTY, // Sets default layer to QWERTY
+ KC_COLEMAK, // Sets default layer to COLEMAK
+ KC_DVORAK, // Sets default layer to DVORAK
+ KC_WORKMAN, // Sets default layer to WORKMAN
+ KC_MAKE, // Run keyboard's customized make command
+ KC_RGB_T, // Toggles RGB Layer Indication mode
+ RGB_IDL, // RGB Idling animations
+ KC_SECRET_1, // test1
+ KC_SECRET_2, // test2
+ KC_SECRET_3, // test3
+ KC_SECRET_4, // test4
+ KC_SECRET_5, // test5
+ KC_CCCV, // Hold to copy, tap to paste
+ UC_FLIP, // (ಠ痊ಠ)┻━┻
+ UC_TABL, // ┬─┬ノ( º _ ºノ)
+ UC_SHRG, // ¯\_(ツ)_/¯
+ UC_DISA, // ಠ_ಠ
KC_DT1,
KC_DT2,
KC_DT3,
KC_DT4,
- NEW_SAFE_RANGE // use "NEWPLACEHOLDER for keymap specific codes
+ NEW_SAFE_RANGE // use "NEWPLACEHOLDER for keymap specific codes
};
bool process_record_secrets(uint16_t keycode, keyrecord_t *record);
@@ 52,25 45,20 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record);
#define QWERTY KC_QWERTY
#define DVORAK KC_DVORAK
#define COLEMAK KC_COLEMAK
+#define WORKMAN KC_WORKMAN
-#define KC_RESET RESET
-#define KC_RST KC_RESET
+#define KC_RST RESET
-#ifdef SWAP_HANDS_ENABLE
+#if defined(SWAP_HANDS_ENABLE)
# define KC_C1R3 SH_T(KC_TAB)
#else // SWAP_HANDS_ENABLE
# define KC_C1R3 KC_TAB
#endif // SWAP_HANDS_ENABLE
-#define BK_LWER LT(_LOWER, KC_BSPC)
#define SP_LWER LT(_LOWER, KC_SPC)
-#define DL_RAIS LT(_RAISE, KC_DEL)
#define ET_RAIS LT(_RAISE, KC_ENTER)
/* OSM keycodes, to keep things clean and easy to change */
-#define KC_MLSF OSM(MOD_LSFT)
-#define KC_MRSF OSM(MOD_RSFT)
-
#define OS_LGUI OSM(MOD_LGUI)
#define OS_RGUI OSM(MOD_RGUI)
#define OS_LSFT OSM(MOD_LSFT)
@@ 82,12 70,6 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record);
#define OS_MEH OSM(MOD_MEH)
#define OS_HYPR OSM(MOD_HYPR)
-#define M_LALT ALT_T(KC_TAB)
-#define M_RALT RALT_T(KC_QUOT)
-
-#define M_LCTL CTL_T(KC_TAB)
-#define M_RCTL RCTL_T(KC_QUOT)
-
#define MT_ESC MT(MOD_LCTL, KC_ESC)
#define ALT_APP ALT_T(KC_APP)
R users/curry/rgb_stuff.c => users/curry/rgb_lighting_user.c +64 -210
@@ 1,138 1,77 @@
#include "curry.h"
-#include "rgb_stuff.h"
-#include "eeprom.h"
+#include "rgb_lighting_user.h"
-#if defined(RGBLIGHT_ENABLE)
extern rgblight_config_t rgblight_config;
bool has_initialized;
void rgblight_sethsv_default_helper(uint8_t index) { rgblight_sethsv_at(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, index); }
-#endif // RGBLIGHT_ENABLE
-
-#if defined(RGB_MATRIX_ENABLE)
-static uint32_t hypno_timer;
-# if defined(SPLIT_KEYBOARD) || defined(KEYBOARD_ergodox_ez) || defined(KEYBOARD_crkbd)
-# define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN_DUAL
-# else
-# define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN
-# endif
-
-void suspend_power_down_keymap(void) { rgb_matrix_set_suspend_state(true); }
-
-void suspend_wakeup_init_keymap(void) { rgb_matrix_set_suspend_state(false); }
-
-void check_default_layer(uint8_t mode, uint8_t type) {
- switch (get_highest_layer(default_layer_state)) {
- case _QWERTY:
- rgb_matrix_layer_helper(HSV_CYAN, mode, rgb_matrix_config.speed, type);
- break;
- case _COLEMAK:
- rgb_matrix_layer_helper(HSV_MAGENTA, mode, rgb_matrix_config.speed, type);
- break;
- case _DVORAK:
- rgb_matrix_layer_helper(HSV_SPRINGGREEN, mode, rgb_matrix_config.speed, type);
- break;
- }
-}
-
-void rgb_matrix_indicators_user(void) {
- if (userspace_config.rgb_layer_change &&
-# ifdef RGB_DISABLE_WHEN_USB_SUSPENDED
- !g_suspend_state &&
-# endif
-# if defined(RGBLIGHT_ENABLE)
- (!rgblight_config.enable && rgb_matrix_config.enable)
-# else
- rgb_matrix_config.enable
-# endif
- ) {
- switch (get_highest_layer(layer_state)) {
- case _RAISE:
- rgb_matrix_layer_helper(HSV_YELLOW, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
- break;
- case _LOWER:
- rgb_matrix_layer_helper(HSV_GREEN, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
- break;
- case _ADJUST:
- rgb_matrix_layer_helper(HSV_RED, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
- break;
- default: {
- check_default_layer(IS_LAYER_ON(_MODS), LED_FLAG_UNDERGLOW);
- break;
- }
- }
- check_default_layer(0, LED_FLAG_MODIFIER);
- }
-}
-#endif
/* Custom indicators for modifiers.
* This allows for certain lights to be lit up, based on what mods are active, giving some visual feedback.
* This is especially useful for One Shot Mods, since it's not always obvious if they're still lit up.
*/
-#ifdef RGBLIGHT_ENABLE
-# ifdef INDICATOR_LIGHTS
+#if defined(INDICATOR_LIGHTS)
void set_rgb_indicators(uint8_t this_mod, uint8_t this_led, uint8_t this_osm) {
if (userspace_config.rgb_layer_change && get_highest_layer(layer_state) == 0) {
if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led & (1 << USB_LED_CAPS_LOCK)) {
-# ifdef SHFT_LED1
+# ifdef SHFT_LED1
rgblight_sethsv_at(120, 255, 255, SHFT_LED1);
-# endif // SHFT_LED1
-# ifdef SHFT_LED2
+# endif // SHFT_LED1
+# ifdef SHFT_LED2
rgblight_sethsv_at(120, 255, 255, SHFT_LED2);
-# endif // SHFT_LED2
+# endif // SHFT_LED2
} else {
-# ifdef SHFT_LED1
+# ifdef SHFT_LED1
rgblight_sethsv_default_helper(SHFT_LED1);
-# endif // SHFT_LED1
-# ifdef SHFT_LED2
+# endif // SHFT_LED1
+# ifdef SHFT_LED2
rgblight_sethsv_default_helper(SHFT_LED2);
-# endif // SHFT_LED2
+# endif // SHFT_LED2
}
if ((this_mod | this_osm) & MOD_MASK_CTRL) {
-# ifdef CTRL_LED1
+# ifdef CTRL_LED1
rgblight_sethsv_at(0, 255, 255, CTRL_LED1);
-# endif // CTRL_LED1
-# ifdef CTRL_LED2
+# endif // CTRL_LED1
+# ifdef CTRL_LED2
rgblight_sethsv_at(0, 255, 255, CTRL_LED2);
-# endif // CTRL_LED2
+# endif // CTRL_LED2
} else {
-# ifdef CTRL_LED1
+# ifdef CTRL_LED1
rgblight_sethsv_default_helper(CTRL_LED1);
-# endif // CTRL_LED1
-# ifdef CTRL_LED2
+# endif // CTRL_LED1
+# ifdef CTRL_LED2
rgblight_sethsv_default_helper(CTRL_LED2);
-# endif // CTRL_LED2
+# endif // CTRL_LED2
}
if ((this_mod | this_osm) & MOD_MASK_GUI) {
-# ifdef GUI_LED1
+# ifdef GUI_LED1
rgblight_sethsv_at(51, 255, 255, GUI_LED1);
-# endif // GUI_LED1
-# ifdef GUI_LED2
+# endif // GUI_LED1
+# ifdef GUI_LED2
rgblight_sethsv_at(51, 255, 255, GUI_LED2);
-# endif // GUI_LED2
+# endif // GUI_LED2
} else {
-# ifdef GUI_LED1
+# ifdef GUI_LED1
rgblight_sethsv_default_helper(GUI_LED1);
-# endif // GUI_LED1
-# ifdef GUI_LED2
+# endif // GUI_LED1
+# ifdef GUI_LED2
rgblight_sethsv_default_helper(GUI_LED2);
-# endif // GUI_LED2
+# endif // GUI_LED2
}
if ((this_mod | this_osm) & MOD_MASK_ALT) {
-# ifdef ALT_LED1
+# ifdef ALT_LED1
rgblight_sethsv_at(240, 255, 255, ALT_LED1);
-# endif // ALT_LED1
-# ifdef GUI_LED2
+# endif // ALT_LED1
+# ifdef GUI_LED2
rgblight_sethsv_at(240, 255, 255, ALT_LED2);
-# endif // GUI_LED2
+# endif // GUI_LED2
} else {
-# ifdef GUI_LED1
+# ifdef GUI_LED1
rgblight_sethsv_default_helper(ALT_LED1);
-# endif // GUI_LED1
-# ifdef GUI_LED2
+# endif // GUI_LED1
+# ifdef GUI_LED2
rgblight_sethsv_default_helper(ALT_LED2);
-# endif // GUI_LED2
+# endif // GUI_LED2
}
}
}
@@ 143,9 82,9 @@ void matrix_scan_indicator(void) {
set_rgb_indicators(get_mods(), host_keyboard_leds(), get_oneshot_mods());
}
}
-# endif // INDICATOR_LIGHTS
+#endif // INDICATOR_LIGHTS
-# ifdef RGBLIGHT_TWINKLE
+#if defined(RGBLIGHT_TWINKLE)
static rgblight_fadeout lights[RGBLED_NUM];
__attribute__((weak)) bool rgblight_twinkle_is_led_used_keymap(uint8_t index) { return false; }
@@ 153,40 92,40 @@ __attribute__((weak)) bool rgblight_twinkle_is_led_used_keymap(uint8_t index) {
/* This function checks for used LEDs. This way, collisions don't occur and cause weird rendering */
bool rgblight_twinkle_is_led_used(uint8_t index) {
switch (index) {
-# ifdef INDICATOR_LIGHTS
-# ifdef SHFT_LED1
+# ifdef INDICATOR_LIGHTS
+# ifdef SHFT_LED1
case SHFT_LED1:
return true;
-# endif // SHFT_LED1
-# ifdef SHFT_LED2
+# endif // SHFT_LED1
+# ifdef SHFT_LED2
case SHFT_LED2:
return true;
-# endif // SHFT_LED2
-# ifdef CTRL_LED1
+# endif // SHFT_LED2
+# ifdef CTRL_LED1
case CTRL_LED1:
return true;
-# endif // CTRL_LED1
-# ifdef CTRL_LED2
+# endif // CTRL_LED1
+# ifdef CTRL_LED2
case CTRL_LED2:
return true;
-# endif // CTRL_LED2
-# ifdef GUI_LED1
+# endif // CTRL_LED2
+# ifdef GUI_LED1
case GUI_LED1:
return true;
-# endif // GUI_LED1
-# ifdef GUI_LED2
+# endif // GUI_LED1
+# ifdef GUI_LED2
case GUI_LED2:
return true;
-# endif // GUI_LED2
-# ifdef ALT_LED1
+# endif // GUI_LED2
+# ifdef ALT_LED1
case ALT_LED1:
return true;
-# endif // ALT_LED1
-# ifdef ALT_LED2
+# endif // ALT_LED1
+# ifdef ALT_LED2
case ALT_LED2:
return true;
-# endif // ALT_LED2
-# endif // INDICATOR_LIGHTS
+# endif // ALT_LED2
+# endif // INDICATOR_LIGHTS
default:
return rgblight_twinkle_is_led_used_keymap(index);
}
@@ 259,8 198,7 @@ void start_rgb_light(void) {
rgblight_sethsv_at(light->hue, 255, light->life, light_index);
}
-# endif
-#endif // RGBLIGHT_ENABLE
+#endif
bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
uint16_t temp_keycode = keycode;
@@ 269,15 207,8 @@ bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
temp_keycode &= 0xFF;
}
-#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
- hypno_timer = timer_read32();
- if (userspace_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == RGB_MATRIX_REST_MODE) {
- rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP);
- }
-#endif
-
switch (temp_keycode) {
-#ifdef RGBLIGHT_TWINKLE
+#if defined(RGBLIGHT_TWINKLE)
case KC_A ... KC_SLASH:
case KC_F1 ... KC_F12:
case KC_INSERT ... KC_UP:
@@ 290,7 221,6 @@ bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
break;
#endif // RGBLIGHT_TWINKLE
case KC_RGB_T: // This allows me to use underglow as layer indication, or as normal
-#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
if (record->event.pressed) {
userspace_config.rgb_layer_change ^= 1;
dprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
@@ 299,38 229,16 @@ bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
layer_state_set(layer_state); // This is needed to immediately set the layer color (looks better)
}
}
-#endif // RGBLIGHT_ENABLE
- break;
- case RGB_IDL: // This allows me to use underglow as layer indication, or as normal
-#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
- if (record->event.pressed) {
- userspace_config.rgb_matrix_idle_anim ^= 1;
- dprintf("RGB Matrix Idle Animation [EEPROM]: %u\n", userspace_config.rgb_matrix_idle_anim);
- eeconfig_update_user(userspace_config.raw);
- if (userspace_config.rgb_matrix_idle_anim) {
- rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP);
- }
- }
-#endif
break;
case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // quantum_keycodes.h L400 for definitions
if (record->event.pressed) {
bool is_eeprom_updated = false;
-#ifdef RGBLIGHT_ENABLE
// This disables layer indication, as it's assumed that if you're changing this ... you want that disabled
if (userspace_config.rgb_layer_change) {
userspace_config.rgb_layer_change = false;
dprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
is_eeprom_updated = true;
}
-#endif
-#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
- if (userspace_config.rgb_matrix_idle_anim) {
- userspace_config.rgb_matrix_idle_anim = false;
- dprintf("RGB Matrix Idle Animation [EEPROM]: %u\n", userspace_config.rgb_matrix_idle_anim);
- is_eeprom_updated = true;
- }
-#endif
if (is_eeprom_updated) {
eeconfig_update_user(userspace_config.raw);
}
@@ 341,8 249,7 @@ bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
}
void keyboard_post_init_rgb(void) {
-#if defined(RGBLIGHT_ENABLE)
-# if defined(RGBLIGHT_STARTUP_ANIMATION)
+#if defined(RGBLIGHT_STARTUP_ANIMATION)
bool is_enabled = rgblight_config.enable;
if (userspace_config.rgb_layer_change) {
rgblight_enable_noeeprom();
@@ 361,44 268,27 @@ void keyboard_post_init_rgb(void) {
rgblight_disable_noeeprom();
}
-# endif
- layer_state_set_user(layer_state);
-#endif
-#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
- if (userspace_config.rgb_matrix_idle_anim) {
- rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE);
- }
#endif
+ layer_state_set_user(layer_state);
}
void matrix_scan_rgb(void) {
-#ifdef RGBLIGHT_ENABLE
-# ifdef RGBLIGHT_TWINKLE
+#if defined(RGBLIGHT_TWINKLE)
scan_rgblight_fadeout();
-# endif // RGBLIGHT_ENABLE
+#endif // RGBLIGHT_ENABLE
-# ifdef INDICATOR_LIGHTS
+#if defined(INDICATOR_LIGHTS)
matrix_scan_indicator();
-# endif
-#endif
-
-#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
- if (userspace_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == RGB_MATRIX_TYPING_HEATMAP && timer_elapsed32(hypno_timer) > 15000) {
- rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE);
- }
#endif
}
-#ifdef RGBLIGHT_ENABLE
void rgblight_set_hsv_and_mode(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode) {
rgblight_sethsv_noeeprom(hue, sat, val);
wait_us(175); // Add a slight delay between color and mode to ensure it's processed correctly
rgblight_mode_noeeprom(mode);
}
-#endif
layer_state_t layer_state_set_rgb(layer_state_t state) {
-#ifdef RGBLIGHT_ENABLE
if (userspace_config.rgb_layer_change) {
switch (get_highest_layer(state)) {
case _RAISE:
@@ 420,6 310,9 @@ layer_state_t layer_state_set_rgb(layer_state_t state) {
case _DVORAK:
rgblight_set_hsv_and_mode(HSV_SPRINGGREEN, mode);
break;
+ case _WORKMAN:
+ rgblight_set_hsv_and_mode(HSV_GOLDENROD, mode);
+ break;
default:
rgblight_set_hsv_and_mode(HSV_CYAN, mode);
break;
@@ 428,44 321,5 @@ layer_state_t layer_state_set_rgb(layer_state_t state) {
}
}
}
-#endif // RGBLIGHT_ENABLE
-
return state;
}
-
-#ifdef RGB_MATRIX_ENABLE
-# include "lib/lib8tion/lib8tion.h"
-extern led_config_t g_led_config;
-
-void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type) {
- HSV hsv = {hue, sat, val};
- if (hsv.v > rgb_matrix_config.hsv.v) {
- hsv.v = rgb_matrix_config.hsv.v;
- }
-
- switch (mode) {
- case 1: // breathing
- {
- uint16_t time = scale16by8(g_rgb_counters.tick, speed / 8);
- hsv.v = scale8(abs8(sin8(time) - 128) * 2, hsv.v);
- RGB rgb = hsv_to_rgb(hsv);
- for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
- if (HAS_FLAGS(g_led_config.flags[i], led_type)) {
- rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
- }
- }
- break;
- }
- default: // Solid Color
- {
- RGB rgb = hsv_to_rgb(hsv);
- for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
- if (HAS_FLAGS(g_led_config.flags[i], led_type)) {
- rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
- }
- }
- break;
- }
- }
-}
-#endif
R users/curry/rgb_stuff.h => users/curry/rgb_lighting_user.h +2 -15
@@ 1,32 1,19 @@
#pragma once
-#include "quantum.h"
-#ifdef RGB_MATRIX_ENABLE
-# include "rgb_matrix.h"
-#endif
-#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_TWINKLE)
typedef struct {
bool enabled;
uint8_t hue;
uint16_t timer;
uint8_t life;
} rgblight_fadeout;
-#endif
bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record);
void keyboard_post_init_rgb(void);
void matrix_scan_rgb(void);
layer_state_t layer_state_set_rgb(layer_state_t state);
layer_state_t default_layer_state_set_rgb(layer_state_t state);
+void rgblight_sethsv_default_helper(uint8_t index);
-#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_TWINKLE)
+#if defined(RGBLIGHT_TWINKLE)
void scan_rgblight_fadeout(void);
#endif
-#if defined(RGBLIGHT_ENABLE)
-void rgblight_sethsv_default_helper(uint8_t index);
-#endif
-
-#ifdef RGB_MATRIX_ENABLE
-void rgb_matrix_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
-void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type);
-#endif
A users/curry/rgb_matrix_user.c => users/curry/rgb_matrix_user.c +144 -0
@@ 0,0 1,144 @@
+#include "curry.h"
+#include "rgb_matrix_user.h"
+#include "lib/lib8tion/lib8tion.h"
+
+static uint32_t hypno_timer;
+extern led_config_t g_led_config;
+
+#define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN_DUAL
+
+void suspend_power_down_keymap(void) { rgb_matrix_set_suspend_state(true); }
+
+void suspend_wakeup_init_keymap(void) { rgb_matrix_set_suspend_state(false); }
+
+void check_default_layer(uint8_t mode, uint8_t type) {
+ switch (get_highest_layer(default_layer_state)) {
+ case _QWERTY:
+ rgb_matrix_layer_helper(HSV_CYAN, mode, rgb_matrix_config.speed, type);
+ break;
+ case _COLEMAK:
+ rgb_matrix_layer_helper(HSV_MAGENTA, mode, rgb_matrix_config.speed, type);
+ break;
+ case _DVORAK:
+ rgb_matrix_layer_helper(HSV_SPRINGGREEN, mode, rgb_matrix_config.speed, type);
+ break;
+ case _WORKMAN:
+ rgb_matrix_layer_helper(HSV_GOLDENROD, mode, rgb_matrix_config.speed, type);
+ break;
+ }
+}
+
+void rgb_matrix_indicators_user(void) {
+ if (userspace_config.rgb_layer_change && !g_suspend_state && rgb_matrix_config.enable) {
+ switch (get_highest_layer(layer_state)) {
+ case _RAISE:
+ rgb_matrix_layer_helper(HSV_YELLOW, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+ break;
+ case _LOWER:
+ rgb_matrix_layer_helper(HSV_GREEN, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+ break;
+ case _ADJUST:
+ rgb_matrix_layer_helper(HSV_RED, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+ break;
+ default: {
+ check_default_layer(IS_LAYER_ON(_MODS), LED_FLAG_UNDERGLOW);
+ break;
+ }
+ }
+ check_default_layer(0, LED_FLAG_MODIFIER);
+ }
+}
+
+bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
+ uint16_t temp_keycode = keycode;
+ // Filter out the actual keycode from MT and LT keys.
+ if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) {
+ temp_keycode &= 0xFF;
+ }
+
+ hypno_timer = timer_read32();
+ if (userspace_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == RGB_MATRIX_REST_MODE) {
+ rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP);
+ }
+
+ switch (temp_keycode) {
+ case KC_RGB_T: // This allows me to use underglow as layer indication, or as normal
+ if (record->event.pressed) {
+ userspace_config.rgb_layer_change ^= 1;
+ dprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
+ eeconfig_update_user(userspace_config.raw);
+ if (userspace_config.rgb_layer_change) {
+ layer_state_set(layer_state); // This is needed to immediately set the layer color (looks better)
+ }
+ }
+ break;
+ case RGB_IDL: // This allows me to use underglow as layer indication, or as normal
+ if (record->event.pressed) {
+ userspace_config.rgb_matrix_idle_anim ^= 1;
+ dprintf("RGB Matrix Idle Animation [EEPROM]: %u\n", userspace_config.rgb_matrix_idle_anim);
+ eeconfig_update_user(userspace_config.raw);
+ if (userspace_config.rgb_matrix_idle_anim) {
+ rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP);
+ }
+ }
+ break;
+ case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // quantum_keycodes.h L400 for definitions
+ if (record->event.pressed) {
+ bool is_eeprom_updated = false;
+ if (userspace_config.rgb_matrix_idle_anim) {
+ userspace_config.rgb_matrix_idle_anim = false;
+ dprintf("RGB Matrix Idle Animation [EEPROM]: %u\n", userspace_config.rgb_matrix_idle_anim);
+ is_eeprom_updated = true;
+ }
+ if (is_eeprom_updated) {
+ eeconfig_update_user(userspace_config.raw);
+ }
+ }
+ break;
+ }
+ return true;
+}
+
+void keyboard_post_init_rgb(void) {
+ if (userspace_config.rgb_matrix_idle_anim) {
+ rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE);
+ }
+}
+
+void matrix_scan_rgb(void) {
+ if (userspace_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == RGB_MATRIX_TYPING_HEATMAP && timer_elapsed32(hypno_timer) > 15000) {
+ rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE);
+ }
+}
+
+void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type) {
+ HSV hsv = {hue, sat, val};
+ if (hsv.v > rgb_matrix_config.hsv.v) {
+ hsv.v = rgb_matrix_config.hsv.v;
+ }
+
+ switch (mode) {
+ case 1: // breathing
+ {
+ uint16_t time = scale16by8(g_rgb_counters.tick, speed / 8);
+ hsv.v = scale8(abs8(sin8(time) - 128) * 2, hsv.v);
+ RGB rgb = hsv_to_rgb(hsv);
+ for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
+ if (HAS_FLAGS(g_led_config.flags[i], led_type)) {
+ rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
+ }
+ }
+ break;
+ }
+ default: // Solid Color
+ {
+ RGB rgb = hsv_to_rgb(hsv);
+ for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
+ if (HAS_FLAGS(g_led_config.flags[i], led_type)) {
+ rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
+ }
+ }
+ break;
+ }
+ }
+}
A users/curry/rgb_matrix_user.h => users/curry/rgb_matrix_user.h +7 -0
@@ 0,0 1,7 @@
+#pragma once
+
+bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record);
+void keyboard_post_init_rgb(void);
+void matrix_scan_rgb(void);
+void rgb_matrix_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
+void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type);
M users/curry/rules.mk => users/curry/rules.mk +15 -5
@@ 1,8 1,15 @@
SRC += curry.c \
process_records.c
-LTO_ENABLE = yes
-SPACE_CADET_ENABLE = no
+# Common flags
+SPACE_CADET_ENABLE = no
+LTO_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+UNICODE_ENABLE = yes
+NKRO_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+LEADER_ENABLE = yes
+TAP_DANCE_ENABLE = no
ifneq ($(strip $(NO_SECRETS)), yes)
ifneq ("$(wildcard $(USER_PATH)/secrets.c)","")
@@ 21,8 28,12 @@ ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes)
SRC += oled.c
endif
+ifeq ($(strip $(LEADER_ENABLE)), yes)
+ SRC += leader.c
+endif
+
ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
- SRC += rgb_stuff.c
+ SRC += rgb_lighting_user.c
ifeq ($(strip $(INDICATOR_LIGHTS)), yes)
OPT_DEFS += -DINDICATOR_LIGHTS
endif
@@ 39,10 50,9 @@ endif
RGB_MATRIX_ENABLE ?= no
ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
- SRC += rgb_stuff.c
+ SRC += rgb_matrix_user.c
endif
-
ifdef CONSOLE_ENABLE
ifeq ($(strip $(KEYLOGGER_ENABLE)), yes)
OPT_DEFS += -DKEYLOGGER_ENABLE
M users/curry/tap_dances.c => users/curry/tap_dances.c +1 -0
@@ 1,3 1,4 @@
+#include "tap_dances.h"
#include "curry.h"
qk_tap_dance_action_t tap_dance_actions[] = {};
M users/curry/tap_dances.h => users/curry/tap_dances.h +0 -2
@@ 1,3 1,1 @@
#pragma once
-#include "curry.h"
-
M users/curry/wrappers.h => users/curry/wrappers.h +13 -17
@@ 15,18 15,6 @@ expanded before being used as arguments to the LAYOUT_xxx macro.
#define LAYOUT_ortho_4x12_wrapper(...) LAYOUT_ortho_4x12(__VA_ARGS__)
#define LAYOUT_ortho_5x12_wrapper(...) LAYOUT_ortho_5x12(__VA_ARGS__)
-/*
-Blocks for each of the four major keyboard layouts
-Organized so we can quickly adapt and modify all of them
-at once, rather than for each keyboard, one at a time.
-And this allows for much cleaner blocks in the keymaps.
-For instance Tap/Hold for Control on all of the layouts
-
-NOTE: These are all the same length. If you do a search/replace
- then you need to add/remove underscores to keep the
- lengths consistent.
-*/
-
#define _________________QWERTY_L1_________________ KC_Q, KC_W, KC_E, KC_R, KC_T
#define _________________QWERTY_L2_________________ KC_A, KC_S, KC_D, KC_F, KC_G
#define _________________QWERTY_L3_________________ KC_Z, KC_X, KC_C, KC_V, KC_B
@@ 51,6 39,14 @@ NOTE: These are all the same length. If you do a search/replace
#define _________________DVORAK_R2_________________ KC_D, KC_H, KC_T, KC_N, KC_S
#define _________________DVORAK_R3_________________ KC_B, KC_M, KC_W, KC_V, KC_Z
+#define _________________WORKMAN_L1________________ KC_Q, KC_D, KC_R, KC_W, KC_B
+#define _________________WORKMAN_L2________________ KC_A, KC_S, KC_H, KC_T, KC_G
+#define _________________WORKMAN_L3________________ KC_Z, KC_X, KC_M, KC_C, KC_V
+
+#define _________________WORKMAN_R1________________ KC_J, KC_F, KC_U, KC_P, KC_SCLN
+#define _________________WORKMAN_R2________________ KC_Y, KC_N, KC_E, KC_O, KC_I
+#define _________________WORKMAN_R3________________ KC_K, KC_L, KC_COMM, KC_DOT, KC_SLASH
+
#define ________________NUMBER_LEFT________________ KC_1, KC_2, KC_3, KC_4, KC_5
#define ________________NUMBER_RIGHT_______________ KC_6, KC_7, KC_8, KC_9, KC_0
@@ 67,26 63,26 @@ NOTE: These are all the same length. If you do a search/replace
#define _________________LOWER_L1__________________ _________________FUNC_LEFT_________________
#define _________________LOWER_L2__________________ _________________SYM_LEFT__________________
-#define _________________LOWER_L3__________________ KC_DT1, KC_DT2, KC_DT3, KC_DT4, _______
+#define _________________LOWER_L3__________________ KC_DT1, KC_DT2, KC_DT3, KC_DT4, KC_CCCV
#define _________________LOWER_R1__________________ _________________FUNC_RIGHT________________
#define _________________LOWER_R2__________________ _________________SYM_RIGHT_________________
-#define _________________LOWER_R3__________________ _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR
+#define _________________LOWER_R3__________________ KC_DQUO, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR
#define _________________RAISE_L1__________________ ________________NUMBER_LEFT________________
#define _________________RAISE_L2__________________ KC_PGUP, KC_PGDN, KC_HOME, KC_END, _______
-#define _________________RAISE_L3__________________ _______, _______, _______, _______, _______
+#define _________________RAISE_L3__________________ UC_FLIP, UC_TABL, UC_SHRG, UC_DISA, _______
#define _________________RAISE_R1__________________ ________________NUMBER_RIGHT_______________
#define _________________RAISE_R2__________________ KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______
-#define _________________RAISE_R3__________________ _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC
+#define _________________RAISE_R3__________________ KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC
#define _________________ADJUST_L1_________________ RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_TOG
#define _________________ADJUST_L2_________________ MU_TOG , CK_TOGG, AU_ON, AU_OFF, CG_NORM
#define _________________ADJUST_L3_________________ RGB_RMOD,RGB_HUD,RGB_SAD, RGB_VAD, KC_RGB_T
#define _________________ADJUST_R1_________________ KC_SEC1, KC_SEC2, KC_SEC3, KC_SEC4, KC_SEC5
-#define _________________ADJUST_R2_________________ CG_SWAP, QWERTY, COLEMAK, DVORAK, XXXXXXX
+#define _________________ADJUST_R2_________________ CG_SWAP, QWERTY, COLEMAK, DVORAK, WORKMAN
#define _________________ADJUST_R3_________________ MG_NKRO, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT
// clang-format on