Add Teensy2.0++ revision and VIA keymap to handwired/sono1 (#15296) * teensy2.0pp revision, via support * updated documentation * Update keyboards/handwired/sono1/t2pp/rules.mk
12 files changed, 198 insertions(+), 87 deletions(-) M keyboards/handwired/sono1/config.h A keyboards/handwired/sono1/keymaps/via/keymap.c A keyboards/handwired/sono1/keymaps/via/rules.mk M keyboards/handwired/sono1/readme.md M keyboards/handwired/sono1/rules.mk R keyboards/handwired/sono1/{ => stm32f103}/chconf.h A keyboards/handwired/sono1/stm32f103/config.h R keyboards/handwired/sono1/{ => stm32f103}/halconf.h R keyboards/handwired/sono1/{ => stm32f103}/mcuconf.h A keyboards/handwired/sono1/stm32f103/rules.mk A keyboards/handwired/sono1/t2pp/config.h A keyboards/handwired/sono1/t2pp/rules.mk
M keyboards/handwired/sono1/config.h => keyboards/handwired/sono1/config.h +5 -69
@@ 1,5 1,5 @@ /* Copyright 2020 DmNosachev Copyright 2021 DmNosachev This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ 30,80 30,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 15 #define MATRIX_COLS 8 /* * Keyboard Matrix Assignments * * Change this to how you wired your keyboard * COLS: AVR pins used for columns, left to right * ROWS: AVR pins used for rows, top to bottom * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ #define MATRIX_ROW_PINS { A5, B3, A9, A10, B13, B14, B15, A8, B7, B8, B9, C13, A15, A0, A1 } #define MATRIX_COL_PINS { A4, A3, B11, B10, B1, B0, A7, A6 } #define UNUSED_PINS { A5 } #define LED_KANA_PIN A2 #define LED_CAPS_LOCK_PIN B5 #define LED_CTRL_XFER_PIN B6 #define LED_NUM_LOCK_PIN B4 #define LED_KB_LOCK_PIN B12 #define LED_PIN_ON_STATE 0 /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* If defined, GRAVE_ESC will always act as ESC when CTRL is held. * This is useful for the Windows task manager shortcut (ctrl+shift+esc). */ //#define GRAVE_ESC_CTRL_OVERRIDE /* * Force NKRO * * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the * makefile for this to work.) * * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) * until the next keyboard reset. * * NKRO may prevent your keystrokes from being detected in the BIOS, but it is * fully operational during normal computer usage. * * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by * bootmagic, NKRO mode will always be enabled until it is toggled again during a * power-up. * */ //#define FORCE_NKRO /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT /* disable these deprecated features by default */ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION @@ 111,3 43,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Bootmagic Lite key configuration */ #define BOOTMAGIC_LITE_ROW 0 #define BOOTMAGIC_LITE_COLUMN 0 /* mechanical locking support. NumLock key on the numpad uses Alps SKCL Lock switch */ #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE \ No newline at end of file
A keyboards/handwired/sono1/keymaps/via/keymap.c => keyboards/handwired/sono1/keymaps/via/keymap.c +75 -0
@@ 0,0 1,75 @@ /* Copyright 2021 DmNosachev * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* ,---------------------------------------------------------------------------------------------------------, ,-----, | F11 | | F12 | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | |PgUp |PgDn | | NO | |-------------------------------------------------------------------------------------------| |-----------| |-----|-----------------, | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | —- | += | ~` |BkSpc | |Home | End | | * | / | - | + | |-------------------------------------------------------------------------------------------| |-----------| |-----------------------| | Tab | Q | W | E | R | T | Y | U | I | O | P | {[ | }] | Enter | | Ins | Del | | 7 | 8 | 9 | += | |--------------------------------------------------------------------------------| | `-----------' |-----------------------| | Ctrl | A | S | D | F | G | H | J | K | L | :; | "' | |\ | | | Up | | 4 | 5 | 6 | . | |--------------------------------------------------------------------------------`----------' |-----------| |-----------------------| | Shift | Z | X | C | V | B | N | M | <, | >. | ?/ | NO | Shift | |Left |Right| | 1 | 2 | 3 | <, | |-------------------------------------------------------------------------------------------| |-----------| |-----------------------| |Caps | Alt | App | GUI | Space | Space | Enter | Ctrl | | Alt | | Down | | 0 | 0 | Enter | `-------------------------------------------------------------------------------------------' `-----------' '-----------------------' | Del | BackSp| `--------------' */ [0] = LAYOUT( KC_F11, KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_PGUP, KC_PGDN, _______, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_HOME, KC_END, KC_PAST, KC_PSLS, KC_PMNS, KC_PPLS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_INS, KC_DEL, KC_P7, KC_P8, KC_P9, KC_EQL, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_UP, KC_P4, KC_P5, KC_P6, KC_PDOT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, KC_RSFT, KC_LEFT, KC_RIGHT, KC_P1, KC_P2, KC_P3, KC_COMM, KC_CAPS, KC_LALT, KC_APP, KC_LGUI, KC_SPACE, KC_SPACE, KC_ENT, KC_RCTL, KC_RALT, KC_DOWN, KC_P0, KC_P0, KC_PENT, KC_DEL, KC_BSPC ), [1] = LAYOUT( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [2] = LAYOUT( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [3] = LAYOUT( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; \ No newline at end of file
A keyboards/handwired/sono1/keymaps/via/rules.mk => keyboards/handwired/sono1/keymaps/via/rules.mk +1 -0
M keyboards/handwired/sono1/readme.md => keyboards/handwired/sono1/readme.md +28 -4
@@ 5,11 5,11 @@ ASkeyboard Sono1 keyboard conversion project: direct connection of Black Pill to the matrix. * Keyboard Maintainer: [DmNosachev](https://github.com/DmNosachev) * Hardware Supported: [ASkeyboard Sono1](http://www5f.biglobe.ne.jp/~silencium/keyboard/html/alps.html), Black Pill STM32F103C8T6 MCU board. Alternatively you can use any MCU which is supported by QMK and has 28 IO pins or more (15x8 matrix and 5 LEDs): Teensy 2.0++, Blue Pill, etc. * Hardware Supported: [ASkeyboard Sono1](http://www5f.biglobe.ne.jp/~silencium/keyboard/html/alps.html), Teensy 2.0++ or Black Pill STM32F103C8T6 MCU board. Alternatively you can use any MCU which is supported by QMK and has 28 IO pins or more (15x8 matrix and 5 LEDs): Blue Pill, Black Pill STM32F4xx, etc. Make example for this keyboard (after setting up your build environment): make handwired/sono1:default qmk compile -kb handwired/sono1:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). @@ 22,11 22,34 @@ ASkeyboard Sono1 has 15x8 matrix. Sono2 numpad connects directly to the main mat Rows (R0-RE) and columns (R0-C7):  Desolder all ICs, capacitors and resistors except R10–R14. ## LEDs Keyboard has 5 LEDs with common anode. Their cathodes are connected to R10–R14 resistors (you may want to replace them to adjust LED brightness for 3.3V voltage). Add 5 wire jumpers to connect them to the corresponding traces.  ## Teensy 2.0++ Suggested mount position for the Teensy 2.0++ (view from the bottom side of the PCB): ``` R8 R9 RA RB RC RD RE L0 R8 C7 C6 C5 C4 C3 C2 C1 C0 * | | | | | | | * | | | | | | | | ,------------------------------------------------------------, ,---|GN B7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 C0 C1 C2 C3 C4 C5 C6 C7 | | |D7 | |USB| | | |GN | '---|V B6 B5 B4 B3 B2 B1 B0 E7 E6 G A F0 F1 F2 F3 F4 F5 F6 F7 | `------------------------------------------------------------' * | | | | | | | | | | | | GN L2 L1 L3 L4 R7 R6 R5 R4 R3 R2 R1 R0 ``` Asterisk sign designates pins of the Teensy that don't align properly with PCB and need to be rewired. 1. Compile and flash the firmware: `qmk compile -kb handwired/sono1/t2pp:default:flash`. Press the reset button on Teensy to launch the bootloader. 2. You will need to solder several pin headers to Teensy: two 7 pin headers (C0–C7, D5–B7), 8 pin (F0–F7) and 4 pin (B1—B4). 3. Solder the Teensy to keyboard's PCB. You will need to manually reroute only 3 pins. ## Black Pill Suggested mount position for the Black Pill (view from the bottom side of the PCB): @@ 47,11 70,12 @@ Asterisk sign designates pins of the Black Pill that don't align properly with P  1. Desolder all ICs, capacitors and resistors except R10–R14. 1. Solder 4-pin SWD header to Black Pill. 2. Burn [STM32duino bootloader](https://github.com/rogerclarkmelbourne/STM32duino-bootloader/blob/master/bootloader_only_binaries/generic_boot20_pb12.bin) to Black Pill. 3. Compile and flash the firmware: `make handwired/sono1:default:flash` 3. Compile and flash the firmware: `qmk compile -kb handwired/sono1/stm32f103:default:flash` 4. Connect rows, columns and LED pads to the corresponding pins of the Black Pill. ## Keymap 'CUR LOCK' key on Sono2 numpad has locking switch by default (Alps SKCL lock). QMK [supports mechanical locking switches](https://docs.qmk.fm/#/faq_keymap?id=mechanical-lock-switch-support) for CapsLock, NumLock and ScrollLock keycodes. There is 'debug' keymap which doesn't output any scancodes, but displays row and column numbers of pressed buttons to console (hid_listen or QMK Toolbox).
M keyboards/handwired/sono1/rules.mk => keyboards/handwired/sono1/rules.mk +1 -8
@@ 1,11 1,4 @@ # MCU name MCU = STM32F103 # Bootloader selection BOOTLOADER = stm32duino # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE DEFAULT_FOLDER = handwired/sono1/t2pp # Build Options # change yes to no to disable
R keyboards/handwired/sono1/chconf.h => keyboards/handwired/sono1/stm32f103/chconf.h +1 -2
@@ 16,7 16,7 @@ /* * This file was auto-generated by: * `qmk chibios-confmigrate -i keyboards/handwired/sono1/chconf.h -r platforms/chibios/common/configs/chconf.h` * `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once @@ 26,4 26,3 @@ #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE #include_next <chconf.h>
A keyboards/handwired/sono1/stm32f103/config.h => keyboards/handwired/sono1/stm32f103/config.h +36 -0
@@ 0,0 1,36 @@ /* Copyright 2021 DmNosachev This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #include "config_common.h" #undef DEVICE_VER #define DEVICE_VER 0x0001 #define MATRIX_ROW_PINS { A5, B3, A9, A10, B13, B14, B15, A8, B7, B8, B9, C13, A15, A0, A1 } #define MATRIX_COL_PINS { A4, A3, B11, B10, B1, B0, A7, A6 } #define LED_KANA_PIN A2 #define LED_CAPS_LOCK_PIN B5 #define LED_CTRL_XFER_PIN B6 #define LED_NUM_LOCK_PIN B4 #define LED_KB_LOCK_PIN B12 #define LED_PIN_ON_STATE 0
R keyboards/handwired/sono1/halconf.h => keyboards/handwired/sono1/stm32f103/halconf.h +1 -2
@@ 16,7 16,7 @@ /* * This file was auto-generated by: * `qmk chibios-confmigrate -i keyboards/handwired/sono1/halconf.h -r platforms/chibios/common/configs/halconf.h` * `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once @@ 24,4 24,3 @@ #define HAL_USE_PWM TRUE #include_next <halconf.h>
R keyboards/handwired/sono1/mcuconf.h => keyboards/handwired/sono1/stm32f103/mcuconf.h +1 -2
@@ 16,7 16,7 @@ /* * This file was auto-generated by: * `qmk chibios-confmigrate -i keyboards/handwired/sono1/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` * `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once @@ 28,4 28,3 @@ #undef STM32_SPI_USE_SPI2 #define STM32_SPI_USE_SPI2 FALSE
A keyboards/handwired/sono1/stm32f103/rules.mk => keyboards/handwired/sono1/stm32f103/rules.mk +8 -0
@@ 0,0 1,8 @@ # MCU name MCU = STM32F103 # Bootloader selection BOOTLOADER = stm32duino # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
A keyboards/handwired/sono1/t2pp/config.h => keyboards/handwired/sono1/t2pp/config.h +36 -0
@@ 0,0 1,36 @@ /* Copyright 2021 DmNosachev This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #include "config_common.h" #undef DEVICE_VER #define DEVICE_VER 0x0002 #define MATRIX_ROW_PINS { F7, F6, F5, F4, F3, F2, F1, F0, D7, B7, D0, D1, D2, D3, D4 } #define MATRIX_COL_PINS { C6, C5, C4, C3, C2, C1, C0, E1 } #define LED_KANA_PIN D5 #define LED_CAPS_LOCK_PIN B3 #define LED_CTRL_XFER_PIN B4 #define LED_NUM_LOCK_PIN B2 #define LED_KB_LOCK_PIN B1 #define LED_PIN_ON_STATE 0
A keyboards/handwired/sono1/t2pp/rules.mk => keyboards/handwired/sono1/t2pp/rules.mk +5 -0