M keyboards/helix/pico/config.h => keyboards/helix/pico/config.h +2 -8
@@ 1,6 1,7 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
+Copyright 2018 MakotoKurauchi
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ 42,12 43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define MASTER_RIGHT
// #define EE_HANDS
-// Helix keyboard OLED support
-// see ./rules.mk: OLED_ENABLE=yes or no
-#ifdef OLED_ENABLE
- #define SSD1306OLED
-#endif
-
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
@@ 114,8 109,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
// USB_MAX_POWER_CONSUMPTION value for Helix keyboard
-// 120 RGBoff, OLEDoff
-// 120 OLED
+// 120 RGBoff
// 330 RGB 6
// 300 RGB 32
// 310 OLED & RGB 32
M keyboards/helix/pico/keymaps/biacco/keymap.c => keyboards/helix/pico/keymaps/biacco/keymap.c +15 -20
@@ 1,24 1,19 @@
+/* Copyright 2018 Biacco42
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
#include QMK_KEYBOARD_H
-#include "bootloader.h"
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#include "split_util.h"
-#endif
-#ifdef AUDIO_ENABLE
- #include "audio.h"
-#endif
-#ifdef SSD1306OLED
- #include "ssd1306.h"
-#endif
-
-extern keymap_config_t keymap_config;
-
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
-extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
M keyboards/helix/pico/keymaps/biacco/rules.mk => keyboards/helix/pico/keymaps/biacco/rules.mk +2 -4
@@ 10,10 10,8 @@ AUDIO_ENABLE = yes # Audio output on port B5
LTO_ENABLE = no # if firmware size over limit, try this option
# Helix Spacific Build Options
-# you can uncomment and edit follows 6 Variables
-# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。
-# OLED_ENABLE = no # OLED_ENABLE
-# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+# you can uncomment and edit follows 4 Variables
+# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。
# LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
# LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
LED_ANIMATIONS = no # LED animations
M keyboards/helix/pico/keymaps/default/keymap.c => keyboards/helix/pico/keymaps/default/keymap.c +15 -120
@@ 1,24 1,25 @@
+/* Copyright 2018 MakotoKurauchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
#include QMK_KEYBOARD_H
-#include "bootloader.h"
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#include "split_util.h"
-#endif
-#ifdef AUDIO_ENABLE
- #include "audio.h"
-#endif
-#ifdef SSD1306OLED
- #include "ssd1306.h"
-#endif
-
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
-extern uint8_t is_master;
-
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ 334,10 335,6 @@ void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
- //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
- #ifdef SSD1306OLED
- iota_gfx_init(!has_usb()); // turns on the display
- #endif
}
@@ 365,105 362,3 @@ void music_scale_user(void)
}
#endif
-
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-void matrix_scan_user(void) {
- iota_gfx_task(); // this is what updates the display continuously
-}
-
-void matrix_update(struct CharacterMatrix *dest,
- const struct CharacterMatrix *source) {
- if (memcmp(dest->display, source->display, sizeof(dest->display))) {
- memcpy(dest->display, source->display, sizeof(dest->display));
- dest->dirty = true;
- }
-}
-
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_LOWER (1<<_LOWER)
-#define L_RAISE (1<<_RAISE)
-#define L_ADJUST (1<<_ADJUST)
-#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
-
-static void render_logo(struct CharacterMatrix *matrix) {
-
- static char logo[]={
- 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
- 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
- 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
- 0};
- matrix_write(matrix, logo);
- //matrix_write_P(&matrix, PSTR(" Split keyboard kit"));
-}
-
-
-
-void render_status(struct CharacterMatrix *matrix) {
-
- // Render to mode icon
- static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
- if(keymap_config.swap_lalt_lgui==false){
- matrix_write(matrix, logo[0][0]);
- matrix_write_P(matrix, PSTR("\n"));
- matrix_write(matrix, logo[0][1]);
- }else{
- matrix_write(matrix, logo[1][0]);
- matrix_write_P(matrix, PSTR("\n"));
- matrix_write(matrix, logo[1][1]);
- }
-
- // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
- char buf[40];
- snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
- matrix_write_P(matrix, PSTR("\nLayer: "));
- switch (layer_state) {
- case L_BASE:
- matrix_write_P(matrix, PSTR("Default"));
- break;
- case L_RAISE:
- matrix_write_P(matrix, PSTR("Raise"));
- break;
- case L_LOWER:
- matrix_write_P(matrix, PSTR("Lower"));
- break;
- case L_ADJUST:
- case L_ADJUST_TRI:
- matrix_write_P(matrix, PSTR("Adjust"));
- break;
- default:
- matrix_write(matrix, buf);
- }
-
- // Host Keyboard LED Status
- char led[40];
- snprintf(led, sizeof(led), "\n%s %s %s",
- (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
- (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
- (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
- matrix_write(matrix, led);
-}
-
-
-void iota_gfx_task_user(void) {
- struct CharacterMatrix matrix;
-
-#if DEBUG_TO_SCREEN
- if (debug_enable) {
- return;
- }
-#endif
-
- matrix_clear(&matrix);
- if(is_master){
- render_status(&matrix);
- }else{
- render_logo(&matrix);
- }
- matrix_update(&display, &matrix);
-}
-
-#endif
M keyboards/helix/pico/keymaps/default/readme.md => keyboards/helix/pico/keymaps/default/readme.md +2 -4
@@ 96,10 96,8 @@ see `qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk`
```
# Helix Spacific Build Options
-# you can uncomment and edit follows 6 Variables
-# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。
-# OLED_ENABLE = no # OLED_ENABLE
-# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+# you can uncomment and edit follows 4 Variables
+# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。
# LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
# LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
# LED_ANIMATIONS = yes # LED animations
M keyboards/helix/pico/keymaps/default/readme_jp.md => keyboards/helix/pico/keymaps/default/readme_jp.md +2 -12
@@ 58,16 58,13 @@
## カスタマイズ
-オプションの OLED をつけたり、
RGB バックライトまたは、RGB Underglow をつけた場合は、
`qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk` の以下の部分を編集して機能を有効化してください。
```
# Helix Spacific Build Options
-# you can uncomment and edit follows 6 Variables
-# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。
-# OLED_ENABLE = no # OLED_ENABLE
-# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+# you can uncomment and edit follows 4 Variables
+# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。
# LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
# LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
# LED_ANIMATIONS = yes # LED animations
@@ 89,13 86,6 @@ rules.mk の下記の部分を編集して no を yes に変更してくださ
LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.)
```
-## OLEDを有効にする
-
-rules.mk の下記の部分を編集して no を yes に変更してください。
-```
-OLED_ENABLE = yes # OLED_ENABLE
-```
-
## iPad/iPhoneサポートを有効にする。
rules.mk の下記の部分を編集して no を yes に変更してください。
M keyboards/helix/pico/keymaps/default/rules.mk => keyboards/helix/pico/keymaps/default/rules.mk +2 -4
@@ 3,10 3,8 @@ AUDIO_ENABLE = yes # Audio output
LTO_ENABLE = no # if firmware size over limit, try this option
# Helix Spacific Build Options
-# you can uncomment and edit follows 6 Variables
-# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。
-# OLED_ENABLE = no # OLED_ENABLE
-# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+# you can uncomment and edit follows 4 Variables
+# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。
# LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
# LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
# LED_ANIMATIONS = yes # LED animations
M keyboards/helix/pico/keymaps/mtei/keymap.c => keyboards/helix/pico/keymaps/mtei/keymap.c +15 -148
@@ 1,31 1,23 @@
+/* Copyright 2018 mtei
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
#include QMK_KEYBOARD_H
-#include "bootloader.h"
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#include "split_util.h"
-#endif
-#ifdef AUDIO_ENABLE
- #include "audio.h"
-#endif
-#ifdef SSD1306OLED
- #include "ssd1306.h"
-#endif
-#ifdef CONSOLE_ENABLE
- #include <print.h>
-#endif
#define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__)
#define kc5(a,b,c,d,e) KC_##a, KC_##b, KC_##c, KC_##d, KC_##e
-extern keymap_config_t keymap_config;
-
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
-extern uint8_t is_master;
-
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ 373,10 365,6 @@ void matrix_init_user(void) {
#ifdef AUDIO_ENABLE
startup_user();
#endif
- //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
- #ifdef SSD1306OLED
- iota_gfx_init(!has_usb()); // turns on the display
- #endif
}
@@ 404,124 392,3 @@ void music_scale_user(void)
}
#endif
-
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-void matrix_scan_user(void) {
- iota_gfx_task(); // this is what updates the display continuously
-}
-
-void matrix_update(struct CharacterMatrix *dest,
- const struct CharacterMatrix *source) {
- if (memcmp(dest->display, source->display, sizeof(dest->display))) {
- memcpy(dest->display, source->display, sizeof(dest->display));
- dest->dirty = true;
- }
-}
-
-static void render_logo(struct CharacterMatrix *matrix) {
-
- static char logo[]={
- 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
- 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
- 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
- 0};
- matrix_write(matrix, logo);
-#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_ANIMATIONS)
- char buf[30];
- if(rgblight_config.enable) {
- snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ",
- rgblight_config.mode,
- rgblight_config.hue/RGBLIGHT_HUE_STEP,
- rgblight_config.sat/RGBLIGHT_SAT_STEP,
- rgblight_config.val/RGBLIGHT_VAL_STEP);
- matrix_write(matrix, buf);
- }
-#endif
- //matrix_write_P(&matrix, PSTR(" Split keyboard kit"));
-}
-
-static const char Qwerty_name[] PROGMEM = " Qwerty";
-static const char Colemak_name[] PROGMEM = " Colemak";
-static const char Dvorak_name[] PROGMEM = " Dvorak";
-static const char Eucalyn_name[] PROGMEM = " Eucalyn";
-
-static const char NumL_name[] PROGMEM = ":NumL";
-static const char NumR_name[] PROGMEM = ":NumR";
-static const char Lower_name[] PROGMEM = ":Func";
-static const char Raise_name[] PROGMEM = ":Extra";
-static const char Adjust_name[] PROGMEM = ":Adjust";
-
-static const char *layer_names[] = {
- [_QWERTY] = Qwerty_name,
- [_COLEMAK] = Colemak_name,
- [_DVORAK] = Dvorak_name,
- [_EUCALYN] = Eucalyn_name,
-
- [_NUML] = NumL_name,
- [_NUMR] = NumR_name,
- [_LOWER] = Lower_name,
- [_RAISE] = Raise_name,
- [_ADJUST] = Adjust_name
-};
-
-void render_status(struct CharacterMatrix *matrix) {
-
- // Render to mode icon
- static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
- if(keymap_config.swap_lalt_lgui==false){
- matrix_write(matrix, logo[0][0]);
- matrix_write_P(matrix, PSTR("\n"));
- matrix_write(matrix, logo[0][1]);
- }else{
- matrix_write(matrix, logo[1][0]);
- matrix_write_P(matrix, PSTR("\n"));
- matrix_write(matrix, logo[1][1]);
- }
-
- // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
- int name_num;
- uint32_t lstate;
- matrix_write_P(matrix, layer_names[current_default_layer]);
- matrix_write_P(matrix, PSTR("\n"));
- for( lstate = layer_state, name_num = 0;
- lstate && name_num < sizeof(layer_names)/sizeof(char *);
- lstate >>=1, name_num++ ) {
- if( (lstate & 1) != 0 ) {
- if( layer_names[name_num] ) {
- matrix_write_P(matrix, layer_names[name_num]);
- }
- }
- }
-
- // Host Keyboard LED Status
- char led[40];
- snprintf(led, sizeof(led), "\n%s %s %s",
- (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
- (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
- (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
- matrix_write(matrix, led);
-}
-
-
-void iota_gfx_task_user(void) {
- struct CharacterMatrix matrix;
-
-#if DEBUG_TO_SCREEN
- if (debug_enable) {
- return;
- }
-#endif
-
- matrix_clear(&matrix);
- if(is_master){
- render_status(&matrix);
- }else{
- render_logo(&matrix);
- }
- matrix_update(&display, &matrix);
-}
-
-#endif
M keyboards/helix/pico/keymaps/mtei/rules.mk => keyboards/helix/pico/keymaps/mtei/rules.mk +2 -4
@@ 10,10 10,8 @@ AUDIO_ENABLE = yes # Audio output on port B5
LTO_ENABLE = no # if firmware size over limit, try this option
# Helix Spacific Build Options
-# you can uncomment and edit follows 6 Variables
-# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。
-# OLED_ENABLE = no # OLED_ENABLE
-# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+# you can uncomment and edit follows 4 Variables
+# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。
# LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
# LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
# LED_ANIMATIONS = yes # LED animations
D keyboards/helix/pico/matrix.c => keyboards/helix/pico/matrix.c +0 -342
@@ 1,342 0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "quantum.h"
-
-#ifdef USE_MATRIX_I2C
-# include "i2c.h"
-#else // USE_SERIAL
-# include "serial.h"
-#endif
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 5
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
-static uint8_t error_count = 0;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-static uint8_t matrix_master_scan(void);
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- split_keyboard_setup();
-
- // initialize row and col
- unselect_rows();
- init_cols();
-
- setPinOutput(B0);
- setPinOutput(D5);
- writePinHigh(B0);
- writePinHigh(D5);
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-
- matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void)
-{
- // Right hand is stored after the left in the matirx so, we need to offset it
- int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- select_row(i);
- _delay_us(30); // without this wait read unstable value.
- matrix_row_t cols = read_cols();
- if (matrix_debouncing[i+offset] != cols) {
- matrix_debouncing[i+offset] = cols;
- debouncing = DEBOUNCE;
- }
- unselect_rows();
- }
-
- if (debouncing) {
- if (--debouncing) {
- _delay_ms(1);
- } else {
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- matrix[i+offset] = matrix_debouncing[i+offset];
- }
- }
- }
-
- return 1;
-}
-
-#ifdef USE_MATRIX_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
- int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
- if (err) goto i2c_error;
-
- // start of matrix stored at 0x00
- err = i2c_master_write(0x00);
- if (err) goto i2c_error;
-
- // Start read
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
- if (err) goto i2c_error;
-
- if (!err) {
- int i;
- for (i = 0; i < ROWS_PER_HAND-1; ++i) {
- matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
- }
- matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
- i2c_master_stop();
- } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
- i2c_reset_state();
- return err;
- }
-
- return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(void) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
- int ret=serial_update_buffers();
- if (ret ) {
- if(ret==2) writePinLow(B0);
- return 1;
- }
- writePinHigh(B0);
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[slaveOffset+i] = serial_slave_buffer[i];
- }
- return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
- if (is_helix_master()) {
- matrix_master_scan();
- }else{
- matrix_slave_scan();
-
- int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
-
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[offset+i] = serial_master_buffer[i];
- }
-
- matrix_scan_quantum();
- }
- return 1;
-}
-
-
-uint8_t matrix_master_scan(void) {
-
- int ret = _matrix_scan();
-
-#ifndef KEYBOARD_helix_rev1
- int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
-// for (int i = 0; i < ROWS_PER_HAND; ++i) {
- /* i2c_slave_buffer[i] = matrix[offset+i]; */
-// i2c_slave_buffer[i] = matrix[offset+i];
-// }
-#else // USE_SERIAL
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- serial_master_buffer[i] = matrix[offset+i];
- }
-#endif
-#endif
-
-#ifdef USE_MATRIX_I2C
- if( i2c_transaction() ) {
-#else // USE_SERIAL
- if( serial_transaction() ) {
-#endif
- // turn on the indicator led when halves are disconnected
- writePinLow(D5);
-
- error_count++;
-
- if (error_count > ERROR_DISCONNECT_COUNT) {
- // reset other half if disconnected
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[slaveOffset+i] = 0;
- }
- }
- } else {
- // turn off the indicator led on no error
- writePinHigh(D5);
- error_count = 0;
- }
- matrix_scan_quantum();
- return ret;
-}
-
-void matrix_slave_scan(void) {
- _matrix_scan();
-
- int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- /* i2c_slave_buffer[i] = matrix[offset+i]; */
- i2c_slave_buffer[i] = matrix[offset+i];
- }
-#else // USE_SERIAL
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- serial_slave_buffer[i] = matrix[offset+i];
- }
-#endif
-}
-
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_bin_reverse16(matrix_get_row(row));
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop16(matrix[i]);
- }
- return count;
-}
-
-static void init_cols(void)
-{
- for(int x = 0; x < MATRIX_COLS; x++) {
- _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF);
- _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
- }
-}
-
-static matrix_row_t read_cols(void)
-{
- matrix_row_t result = 0;
- for(int x = 0; x < MATRIX_COLS; x++) {
- result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
- }
- return result;
-}
-
-static void unselect_rows(void)
-{
- for(int x = 0; x < ROWS_PER_HAND; x++) {
- _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF);
- _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
- }
-}
-
-static void select_row(uint8_t row)
-{
- _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF);
- _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
-}
A keyboards/helix/pico/override_helix_options.mk-maintenance => keyboards/helix/pico/override_helix_options.mk-maintenance +42 -0
@@ 0,0 1,42 @@
+#
+# This file is not normally used. It is used for maintenance testing purposes.
+# To use it, do the following:
+#
+# $ cp override_helix_options.mk-maintenance override_helix_options.mk
+#
+$(info -------------------------)
+$(info override_helix_options.mk)
+$(info -------------------------)
+
+define HELIX_OVERRIDE_PARSE
+ ifeq ($(strip $1),back)
+ LED_BACK_ENABLE = yes
+ LED_UNDERGLOW_ENABLE = no
+ endif
+ ifeq ($(strip $1),under)
+ LED_BACK_ENABLE = no
+ LED_UNDERGLOW_ENABLE = yes
+ endif
+ ifneq ($(filter noled led-off led_off,$(strip $1)),)
+ LED_BACK_ENABLE = no
+ LED_UNDERGLOW_ENABLE = no
+ endif
+ ifneq ($(filter noaudio audio-off audio_off,$(strip $1)),)
+ AUDIO_ENABLE = no
+ endif
+ ifneq ($(filter audio audio-on audio_on,$(strip $1)),)
+ AUDIO_ENABLE = yes
+ endif
+ ifneq ($(filter sc split-common split_common,$(strip $1)),)
+ SPLIT_KEYBOARD = yes
+ endif
+ ifneq ($(filter nosc no-sc no-split-common no-split_common,$(strip $1)),)
+ SPLIT_KEYBOARD = no
+ endif
+ ifeq ($(strip $1),scan)
+ DEBUG_MATRIX_SCAN_RATE_ENABLE = yes
+ endif
+ ifeq ($(strip $1),scan-api)
+ DEBUG_MATRIX_SCAN_RATE_ENABLE = api
+ endif
+endef # end of HELIX_OVERRIDE_PARSE
M keyboards/helix/pico/pico.c => keyboards/helix/pico/pico.c +15 -14
@@ 1,3 1,18 @@
+/* Copyright 2018 MakotoKurauchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
#include "helix.h"
// Each keymap.c should use is_keyboard_master() instead of 'is_master'.
@@ 5,14 20,6 @@
// for the old keymap.c.
uint8_t is_master = false;
-#ifdef SSD1306OLED
-#include "ssd1306.h"
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- return process_record_gfx(keycode,record) && process_record_user(keycode, record);
-}
-#endif
-
void matrix_init_kb(void) {
// Each keymap.c should use is_keyboard_master() instead of is_master.
// But keep is_master for a while for backwards compatibility
@@ 28,9 35,3 @@ void keyboard_post_init_kb(void) {
#endif
keyboard_post_init_user();
}
-
-#if defined(SPLIT_KEYBOARD) && defined(SSD1306OLED)
-void matrix_slave_scan_user(void) {
- matrix_scan_user();
-}
-#endif
M keyboards/helix/pico/pico.h => keyboards/helix/pico/pico.h +15 -5
@@ 1,12 1,22 @@
+/* Copyright 2018 MakotoKurauchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
#pragma once
#include "helix.h"
-#ifndef SPLIT_KEYBOARD
- extern bool is_helix_master(void);
- #define is_keyboard_master() is_helix_master()
-#endif
-
// Each keymap.c should use is_keyboard_master() instead of 'is_master', 'has_usb()'.
// But keep 'is_master' for a while for backwards compatibility
// for the old keymap.c.
M keyboards/helix/pico/post_rules.mk => keyboards/helix/pico/post_rules.mk +34 -104
@@ 4,90 4,30 @@
# Post-processing rules convert keyboard-specific shortcuts (that represent
# combinations of standard options) into QMK standard options.
#
+-include $(strip $(HELIX_TOP_DIR)/pico/override_helix_options.mk) ## File dedicated to maintenance
-define HELIX_CUSTOMISE_MSG
- $(info Helix Spacific Build Options)
- $(info - OLED_ENABLE = $(OLED_ENABLE))
- $(info - LED_BACK_ENABLE = $(LED_BACK_ENABLE))
- $(info - LED_UNDERGLOW_ENABLE = $(LED_UNDERGLOW_ENABLE))
- $(info - LED_ANIMATIONS = $(LED_ANIMATIONS))
- $(info - IOS_DEVICE_ENABLE = $(IOS_DEVICE_ENABLE))
- $(info )
-endef
+# Parse 'HELIX=xx,yy,zz' option
+ifneq ($(strip $(HELIX)),)
+ # make HELIX=ios helix/pico:AKEYMAP
+ # make HELIX=no-ani helix/pico:AKEYMAP
+ # make HELIX=ios,no-ani helix/pico:AKEYMAP
+ define HELIX_OPTION_PARSE
+ # parce 'no-ani' 'ios'
+ $(if $(SHOW_PARCE),$(info parse .$1.)) #debug
+ $(if $(HELIX_OVERRIDE_PARSE),$(call HELIX_OVERRIDE_PARSE,$1))
-define HELIX_HELP_MSG
- $(info Helix keyboard convenient command line option)
- $(info - make HELIX=<options> helix/pico:<keymap>)
- $(info - option= oled | back | under | na | no-ani)
- $(info - ios | sc | split-common | scan | verbose)
- $(info - ex.)
- $(info - make HELIX=oled helix/pico:<keymap>)
- $(info - make HELIX=back helix/pico:<keymap>)
- $(info - make HELIX=under helix/pico:<keymap>)
- $(info - make HELIX=back,na helix/pico:<keymap>)
- $(info - make HELIX=back,ios helix/pico:<keymap>)
- $(info )
-endef
+ ifeq ($(strip $1),ios)
+ IOS_DEVICE_ENABLE = yes
+ endif
+ ifneq ($(filter na no_ani no-ani,$(strip $1)),)
+ LED_ANIMATIONS = no
+ endif
+ endef # end of HELIX_OPTION_PARSE
- ifneq ($(strip $(HELIX)),)
COMMA=,
- helix_option := $(subst $(COMMA), , $(HELIX))
- ifneq ($(filter help,$(helix_option)),)
- $(eval $(call HELIX_HELP_MSG))
- $(error )
- endif
- ifneq ($(filter oled,$(helix_option)),)
- OLED_ENABLE = yes
- endif
- ifneq ($(filter back,$(helix_option)),)
- LED_BACK_ENABLE = yes
- else ifneq ($(filter under,$(helix_option)),)
- LED_UNDERGLOW_ENABLE = yes
- endif
- ifneq ($(filter na,$(helix_option)),)
- LED_ANIMATIONS = no
- endif
- ifneq ($(filter no_ani,$(helix_option)),)
- LED_ANIMATIONS = no
- endif
- ifneq ($(filter no-ani,$(helix_option)),)
- LED_ANIMATIONS = no
- endif
- ifneq ($(filter ios,$(helix_option)),)
- IOS_DEVICE_ENABLE = yes
- endif
- ifneq ($(filter sc,$(helix_option)),)
- SPLIT_KEYBOARD = yes
- endif
- ifneq ($(filter split-common,$(helix_option)),)
- SPLIT_KEYBOARD = yes
- endif
- ifneq ($(filter scan,$(helix_option)),)
- # use DEBUG_MATRIX_SCAN_RATE
- # see docs/newbs_testing_debugging.md
- OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE
- CONSOLE_ENABLE = yes
- SHOW_VERBOSE_INFO = yes
- endif
- ifneq ($(filter verbose,$(helix_option)),)
- SHOW_VERBOSE_INFO = yes
- endif
+ $(eval $(foreach A_OPTION_NAME,$(subst $(COMMA), ,$(HELIX)), \
+ $(call HELIX_OPTION_PARSE,$(A_OPTION_NAME))))
SHOW_HELIX_OPTIONS = yes
- endif
-
-ifneq ($(strip $(SPLIT_KEYBOARD)), yes)
- SRC += local_drivers/serial.c
- KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
-
- # A workaround until #7089 is merged.
- # serial.c must not be compiled with the -lto option.
- # The current LIB_SRC has a side effect with the -fno-lto option, so use it.
- LIB_SRC += local_drivers/serial.c
-
- CUSTOM_MATRIX = yes
-
- SRC += pico/matrix.c
- SRC += pico/split_util.c
endif
########
@@ 98,7 38,6 @@ ifeq ($(strip $(LED_BACK_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
OPT_DEFS += -DRGBLED_BACK
ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
- $(eval $(call HELIX_CUSTOMISE_MSG))
$(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes')
endif
else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
@@ 113,35 52,26 @@ ifeq ($(strip $(LED_ANIMATIONS)), yes)
OPT_DEFS += -DLED_ANIMATIONS
endif
-ifeq ($(strip $(OLED_ENABLE)), yes)
- SRC += local_drivers/i2c.c
- SRC += local_drivers/ssd1306.c
- KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
- OPT_DEFS += -DOLED_ENABLE
- ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
- OPT_DEFS += -DLOCAL_GLCDFONT
- endif
-endif
-
ifeq ($(strip $(AUDIO_ENABLE)),yes)
ifeq ($(strip $(RGBLIGHT_ENABLE)),yes)
LTO_ENABLE = yes
endif
- ifeq ($(strip $(OLED_ENABLE)),yes)
- LTO_ENABLE = yes
- endif
endif
ifneq ($(strip $(SHOW_HELIX_OPTIONS)),)
- $(eval $(call HELIX_CUSTOMISE_MSG))
- ifneq ($(strip $(SHOW_VERBOSE_INFO)),)
- $(info -- RGBLIGHT_ENABLE = $(RGBLIGHT_ENABLE))
- $(info -- CONSOLE_ENABLE = $(CONSOLE_ENABLE))
- $(info -- OPT_DEFS = $(OPT_DEFS))
- $(info -- SPLIT_KEYBOARD = $(SPLIT_KEYBOARD))
- $(info -- LTO_ENABLE = $(LTO_ENABLE))
- $(info )
- endif
+ $(info Helix Spacific Build Options)
+ $(info - LED_BACK_ENABLE = $(LED_BACK_ENABLE))
+ $(info - LED_UNDERGLOW_ENABLE = $(LED_UNDERGLOW_ENABLE))
+ $(info - LED_ANIMATIONS = $(LED_ANIMATIONS))
+ $(info - IOS_DEVICE_ENABLE = $(IOS_DEVICE_ENABLE))
+ $(info )
+ $(info QMK Build Options)
+ $(info -- SPLIT_KEYBOARD = $(SPLIT_KEYBOARD))
+ $(info -- AUDIO_ENABLE = $(AUDIO_ENABLE))
+ $(info -- RGBLIGHT_ENABLE = $(RGBLIGHT_ENABLE))
+ $(info -- CONSOLE_ENABLE = $(CONSOLE_ENABLE))
+ $(info -- OPT_DEFS = $(OPT_DEFS))
+ $(info -- LTO_ENABLE = $(LTO_ENABLE))
+ $(info -- DEBUG_MATRIX_SCAN_RATE_ENABLE = $(DEBUG_MATRIX_SCAN_RATE_ENABLE))
+ $(info )
endif
-
-OLED_ENABLE = no # disable OLED in TOP/common_features.mk
M keyboards/helix/pico/qmk_conf/rules.mk => keyboards/helix/pico/qmk_conf/rules.mk +0 -2
@@ 1,4 1,2 @@
EXTRAKEY_ENABLE = yes # Audio control and System control
AUDIO_ENABLE = yes # Audio output
-
-include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))
M keyboards/helix/pico/rules.mk => keyboards/helix/pico/rules.mk +2 -2
@@ 1,6 1,6 @@
+SPLIT_KEYBOARD = yes
+
# Helix Spacific Build Options default values
-OLED_ENABLE = no # OLED_ENABLE
-LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
LED_ANIMATIONS = yes # LED animations
D keyboards/helix/pico/split_util.c => keyboards/helix/pico/split_util.c +0 -104
@@ 1,104 0,0 @@
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-#include "wait.h"
-
-#ifdef USE_MATRIX_I2C
-# include "i2c.h"
-#else
-# include "serial.h"
-#endif
-
-#ifdef EE_HANDS
-# include "eeconfig.h"
-#endif
-
-#ifndef SPLIT_USB_TIMEOUT
- #define SPLIT_USB_TIMEOUT 2500
-#endif
-
-volatile bool isLeftHand = true;
-
-bool waitForUsb(void) {
- for (uint8_t i = 0; i < (SPLIT_USB_TIMEOUT / 100); i++) {
- // This will return true of a USB connection has been established
- if (UDADDR & _BV(ADDEN)) {
- return true;
- }
- wait_ms(100);
- }
-
- // Avoid NO_USB_STARTUP_CHECK - Disable USB as the previous checks seem to enable it somehow
- (USBCON &= ~(_BV(USBE) | _BV(OTGPADE)));
-
- return false;
-}
-
-bool is_keyboard_left(void) {
-#if defined(SPLIT_HAND_PIN)
- // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
- setPinInput(SPLIT_HAND_PIN);
- return readPin(SPLIT_HAND_PIN);
-#elif defined(EE_HANDS)
- return eeconfig_read_handedness();
-#elif defined(MASTER_RIGHT)
- return !is_helix_master();
-#endif
-
- return is_helix_master();
-}
-
-bool is_helix_master(void) {
- static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
-
- // only check once, as this is called often
- if (usbstate == UNKNOWN) {
-#if defined(SPLIT_USB_DETECT)
- usbstate = waitForUsb() ? MASTER : SLAVE;
-#elif defined(__AVR__)
- USBCON |= (1 << OTGPADE); // enables VBUS pad
- wait_us(5);
-
- usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE; // checks state of VBUS
-#else
- usbstate = MASTER;
-#endif
- }
-
- return (usbstate == MASTER);
- }
-
-static void keyboard_master_setup(void) {
-
-#ifdef USE_MATRIX_I2C
- i2c_master_init();
-#else
- serial_master_init();
-#endif
-}
-
-static void keyboard_slave_setup(void) {
-
-#ifdef USE_MATRIX_I2C
- i2c_slave_init(SLAVE_I2C_ADDRESS);
-#else
- serial_slave_init();
-#endif
-}
-
-void split_keyboard_setup(void) {
- isLeftHand = is_keyboard_left();
-
- if (is_helix_master()) {
- keyboard_master_setup();
- } else {
- keyboard_slave_setup();
- }
- sei();
-}
D keyboards/helix/pico/split_util.h => keyboards/helix/pico/split_util.h +0 -16
@@ 1,16 0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include "eeconfig.h"
-
-#define SLAVE_I2C_ADDRESS 0x32
-
-extern volatile bool isLeftHand;
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
-
-void split_keyboard_setup(void);
-bool is_helix_master(void);
-
-void matrix_master_OLED_init (void);