2 files changed, 40 insertions(+), 8 deletions(-)

M README
M hhkb/keymap.c

@@ 84,6 84,9 @@ debouncing logic
     will be coded when bouncing occurs.
     bouncing doesnt occur on my ALPS switch so far.
     scan rate is too slow?(to be measure)
+layer switch
+    time before switching
+    timeout when not used during specific time
 
 Trackpoint(PS/2)
     receive PS/2 signal from TrackPoint


@@ 108,6 111,11 @@ DONE:
 support for HHKB pro matrix signal
     exchange controller board with teensy
     2010/10/11
+keymap
+    Matias half keyboard style
+    2010/10/23
+souce code cleaning
+    2010/10/23
 
 
 EOF

@@ 43,7 43,7 @@ static int onbit(uint8_t bits);
  *      |Gui |Alt  |Space                  |Alt  |Gui|
  *      `--------------------------------------------'
  * 
- * Layer3(RALT) vi mode
+ * Layer2(RALT) vi mode
  * ,-----------------------------------------------------------.
  * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
  * |-----------------------------------------------------------|


@@ 56,7 56,7 @@ static int onbit(uint8_t bits);
  *       |Gui|Alt  |Sapce                  |xxxxx|Mb3|
  *       `-------------------------------------------'
  *
- * Layer4(semicolon) mouse mode
+ * Layer3(semicolon) mouse mode
  * ,-----------------------------------------------------------.
  * |Esc|   |   |   |   |   |   |   |   |   |   |   |   |   |   |
  * |-----------------------------------------------------------|


@@ 68,6 68,19 @@ static int onbit(uint8_t bits);
  * `-----------------------------------------------------------'
  *      |Gui |Alt  |Mb1                    |Alt  |Gui|
  *      `--------------------------------------------'
+ *
+ * Layer4 Matias half keyboard style
+ * ,-----------------------------------------------------------.
+ * |  -|  0|  9|  8|  7|  6|  5|  4|  3|  2|  1|   |   |   |Esc|
+ * |-----------------------------------------------------------|
+ * |Backs|  P|  O|  I|  U|  Y|  T|  R|  E|  W|  Q|   |   |Tab  |
+ * |-----------------------------------------------------------|
+ * |Contro|  ;|  L|  K|  J|  H|  G|  F|  D|  S|  A|Con|Control |
+ * |-----------------------------------------------------------|
+ * |Shift   |  /|  .|  ,|  M|  N|  B|  V|  C|  X|  Z|Shift |   |
+ * `-----------------------------------------------------------'
+ *      |Gui |Alt  |xxxxxxxxxxxxxxxxxxxxxxx|Alt  |Gui|
+ *      `--------------------------------------------'
  * 
  * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel 
  */


@@ 76,15 89,15 @@ static int onbit(uint8_t bits);
 static const uint8_t PROGMEM fn_keycode[] = {
     KB_NO,          // FN_0
     KB_NO,          // FN_1
-    KB_RALT,        // FN_2
+    KB_NO,          // FN_2
     KB_SCOLON,      // FN_3
-    KB_NO,          // FN_4
+    KB_SPACE,       // FN_4
     KB_NO,          // FN_5
     KB_NO,          // FN_6
     KB_NO,          // FN_7
 };
 /* layer to change into while Fn key pressed */ 
-static const int PROGMEM fn_layer[] = { 0, 1, 2, 3, 0, 0, 0, 0 };
+static const int PROGMEM fn_layer[] = { 0, 1, 2, 3, 4, 0, 0, 0 };
 
 static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /*  plain keymap


@@ 110,7 123,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         { KB_9,       KB_0,       KB_O,       KB_P,       FN_3,       KB_L,       KB_COMMA,   KB_NO       },
         { KB_MINUS,   KB_EQUAL,   KB_RBRACKET,KB_LBRACKET,KB_QUOTE,   KB_SLASH,   KB_DOT,     KB_NO       },
     },
-    // 1: FN_1 HHKB mode(Fn)
+    // 1: HHKB mode(Fn)
     {
         { KB_F2,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO       },
         { KB_F3,      KB_F4,      KB_NO,      KB_NO,      KB_MUTE,    KB_F20,     KB_NO,      KB_NO       },


@@ 121,7 134,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         { KB_F9,      KB_F10,     KB_SCKLOCK, KB_BREAK,   KB_LEFT,    KB_PGUP,    KB_END,     KB_NO       },
         { KB_F11,     KB_F12,     KB_NO,      KB_UP,      KB_RIGHT,   KB_DOWN,    KB_PGDOWN,  KB_NO       },
     },
-    // 2: FN_2 vi mode(RALT)
+    // 2: vi mode(RALT)
     {
         { KB_F2,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO       },
         { KB_F3,      KB_F4,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO       },


@@ 132,7 145,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         { KB_F9,      KB_F10,     KB_END,     KB_NO,      KB_NO,      KB_RIGHT,   MS_UP,      KB_NO       },
         { KB_F11,     KB_F12,     MS_WH_UP,   MS_WH_DOWN, KB_NO,      MS_BTN1,    MS_RIGHT,   KB_NO       },
     },
-    // 3: FN_3 vi mouse mode(SCOLON)
+    // 3: vi mouse mode(SCOLON)
     {
         { KB_F2,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO       },
         { KB_F3,      KB_F4,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO,      KB_NO       },


@@ 143,6 156,17 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         { KB_F9,      KB_F10,     MS_WH_RIGHT,KB_NO,      KB_NO,      MS_RIGHT,   MS_BTN2,    KB_NO       },
         { KB_F11,     KB_F12,     KB_NO,      KB_NO,      KB_NO,      KB_NO,      MS_BTN3,    KB_NO       },
     },
+    // 4: Matias half keyboard style(SPACE) [NOT USED]
+    {
+        { KB_9,       KB_P,       KB_O,       KB_L,       KB_SCOLON,  KB_SLASH,   KB_DOT,     KB_COMMA    },
+        { KB_8,       KB_7,       KB_U,       KB_I,       KB_K,       KB_J,       KB_M,       KB_N        },
+        { KB_6,       KB_5,       KB_T,       KB_Y,       KB_H,       KB_G,       KB_B,       KB_NO       },
+        { KB_0,       KB_MINUS,   KB_BSPACE,  KB_LCTRL,   KB_LSHIFT,  KB_LGUI,    KB_LALT,    KB_NO       },
+        { KB_4,       KB_3,       KB_R,       KB_E,       KB_D,       KB_F,       KB_V,       KB_NO       },
+        { KB_NO,      KB_ESCAPE,  KB_TAB,     KB_RCTRL,   FN_1,       KB_RSHIFT,  KB_RGUI,    KB_RALT     },
+        { KB_2,       KB_1,       KB_W,       KB_Q,       KB_A,       KB_S,       KB_C,       KB_NO       },
+        { KB_NO,      KB_NO,      KB_RBRACKET,KB_LBRACKET,KB_QUOTE,   KB_Z,       KB_X,       KB_NO       },
+    },
 };