A keyboards/reviung33/config.h => keyboards/reviung33/config.h +137 -0
@@ 0,0 1,137 @@
+/*
+Copyright 2020 gtips
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x516D
+#define DEVICE_VER 0x0001
+#define MANUFACTURER gtips
+#define PRODUCT reviung33
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F4, F5, F6, F7}
+#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B1, B3, B2, B6, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+# define RGBLED_NUM 5
+# define RGBLIGHT_HUE_STEP 16
+# define RGBLIGHT_SAT_STEP 16
+# define RGBLIGHT_VAL_STEP 16
+# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+# define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//# define RGBLIGHT_EFFECT_BREATHING
+//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//# define RGBLIGHT_EFFECT_SNAKE
+//# define RGBLIGHT_EFFECT_KNIGHT
+//# define RGBLIGHT_EFFECT_CHRISTMAS
+//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//# define RGBLIGHT_EFFECT_RGB_TEST
+//# define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
A keyboards/reviung33/info.json => keyboards/reviung33/info.json +49 -0
@@ 0,0 1,49 @@
+{
+ "keyboard_name": "reviung33",
+ "url": "",
+ "maintainer": "gtips",
+ "width": 3,
+ "height": 2,
+ "layouts": {
+ "LAYOUT_reviung33": {
+ "layout": [
+ {"x":0, "y":0},
+ {"x":1, "y":0},
+ {"x":2, "y":0},
+ {"x":3, "y":0},
+ {"x":4, "y":0},
+ {"x":5, "y":0},
+ {"x":6, "y":0},
+ {"x":7, "y":0},
+ {"x":8, "y":0},
+ {"x":9, "y":0},
+
+ {"x":0, "y":1},
+ {"x":1, "y":1},
+ {"x":2, "y":1},
+ {"x":3, "y":1},
+ {"x":4, "y":1},
+ {"x":5, "y":1},
+ {"x":6, "y":1},
+ {"x":7, "y":1},
+ {"x":8, "y":1},
+ {"x":9, "y":1},
+
+ {"x":0, "y":2},
+ {"x":1, "y":2},
+ {"x":2, "y":2},
+ {"x":3, "y":2},
+ {"x":4, "y":2},
+ {"x":5, "y":2},
+ {"x":6, "y":2},
+ {"x":7, "y":2},
+ {"x":8, "y":2},
+ {"x":9, "y":2},
+
+ {"x":0, "y":3},
+ {"x":2, "y":3, "w":6},
+ {"x":9, "y":3}
+ ]
+ }
+ }
+}
A keyboards/reviung33/keymaps/default/keymap.c => keyboards/reviung33/keymaps/default/keymap.c +71 -0
@@ 0,0 1,71 @@
+/* Copyright 2020 gtips
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _BASE,
+ _LOWER,
+ _RAISE,
+ _ADJUST
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+#define CT_Q LCTL_T(KC_Q)
+#define CT_CM RCTL_T(KC_COMM)
+#define SF_Z LSFT_T(KC_Z)
+#define SF_SS RSFT_T(KC_SLSH)
+#define AL_X LALT_T(KC_X)
+#define AL_DT RALT_T(KC_DOT)
+#define TB_LO LT(LOWER, KC_TAB)
+#define BS_RA LT(RAISE, KC_BSPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BASE] = LAYOUT_reviung33(
+ CT_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
+ KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
+ SF_Z, AL_X, KC_C, KC_V, KC_B, KC_N, KC_M, CT_CM, AL_DT, SF_SS,
+ TB_LO, KC_SPC, BS_RA
+ ),
+
+ [_LOWER] = LAYOUT_reviung33(
+ KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,
+ KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_SCLN,
+ KC_LSFT, KC_ESC, KC_LGUI, KC_LALT, KC_QUOT, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_RSFT,
+ _______, _______, _______
+ ),
+
+ [_RAISE] = LAYOUT_reviung33(
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
+ KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, XXXXXXX, XXXXXXX, KC_GRV, KC_TILD, KC_COLN,
+ KC_LSFT, KC_ESC, KC_RGUI, KC_LALT, KC_DQUO, KC_TAB, KC_RALT, KC_RCTL, KC_RALT, KC_RSFT,
+ _______, KC_DEL, _______
+ ),
+
+ [_ADJUST] = LAYOUT_reviung33(
+ RGB_VAI, RGB_SAI, RGB_HUI, RGB_MOD, RGB_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,
+ RGB_VAD, RGB_SAD, RGB_HUD, RGB_RMOD,XXXXXXX, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, KC_F11, KC_F12, KC_CAPS, XXXXXXX, KC_PSCR,
+ _______, _______, _______
+ ),
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+ return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
A keyboards/reviung33/keymaps/default/readme.md => keyboards/reviung33/keymaps/default/readme.md +1 -0
@@ 0,0 1,1 @@
+# The default keymap for reviung33
A keyboards/reviung33/keymaps/default_jp/keymap.c => keyboards/reviung33/keymaps/default_jp/keymap.c +70 -0
@@ 0,0 1,70 @@
+/* Copyright 2020 gtips
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "keymap_jp.h"
+
+enum layer_names {
+ _BASE,
+ _LOWER,
+ _RAISE,
+ _ADJUST
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+#define CT_Q LCTL_T(JP_Q)
+#define CT_CM RCTL_T(JP_COMM)
+#define SF_Z LSFT_T(JP_Z)
+#define SF_SS RSFT_T(JP_SLSH)
+#define AL_X LALT_T(JP_X)
+#define AL_DT RALT_T(JP_DOT)
+#define TB_LO LT(LOWER, KC_TAB)
+#define BS_RA LT(RAISE, KC_BSPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BASE] = LAYOUT_reviung33(
+ CT_Q, JP_W, JP_E, JP_R, JP_T, JP_Y, JP_U, JP_I, JP_O, JP_P,
+ JP_A, JP_S, JP_D, JP_F, JP_G, JP_H, JP_J, JP_K, JP_L, KC_ENT,
+ SF_Z, AL_X, JP_C, JP_V, JP_B, JP_N, JP_M, CT_CM, AL_DT, SF_SS,
+ TB_LO, KC_SPC, BS_RA
+ ),
+
+ [_LOWER] = LAYOUT_reviung33(
+ JP_EXLM, JP_AT, JP_HASH, JP_DLR, JP_PERC, JP_CIRC, JP_AMPR, JP_ASTR, JP_LPRN, JP_RPRN,
+ JP_UNDS, JP_PLUS, JP_LCBR, JP_RCBR, JP_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, JP_SCLN,
+ KC_LSFT, KC_ESC, KC_LGUI, KC_LALT, JP_QUOT, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_RSFT,
+ _______, _______, _______
+ ),
+
+ [_RAISE] = LAYOUT_reviung33(
+ JP_1, JP_2, JP_3, JP_4, JP_5, JP_6, JP_7, JP_8, JP_9, JP_0,
+ JP_MINS, JP_EQL, JP_LBRC, JP_RBRC, JP_YEN, KC_RO, XXXXXXX, JP_GRV, JP_TILD, JP_COLN,
+ KC_LSFT, KC_ESC, KC_RGUI, KC_LALT, JP_DQUO, KC_TAB, XXXXXXX, KC_RCTL, KC_RALT, KC_RSFT,
+ _______, KC_DEL, _______
+ ),
+
+ [_ADJUST] = LAYOUT_reviung33(
+ RGB_VAI, RGB_SAI, RGB_HUI, RGB_MOD, RGB_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,
+ RGB_VAD, RGB_SAD, RGB_HUD, RGB_RMOD,XXXXXXX, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, KC_F11, KC_F12, KC_CAPS, XXXXXXX, KC_PSCR,
+ _______, _______, _______
+ ),
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+ return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
A keyboards/reviung33/keymaps/default_jp/readme.md => keyboards/reviung33/keymaps/default_jp/readme.md +1 -0
@@ 0,0 1,1 @@
+# The default_jp keymap for reviung33
A keyboards/reviung33/readme.md => keyboards/reviung33/readme.md +15 -0
@@ 0,0 1,15 @@
+# reviung33
+
+
+
+The REVIUNG33 is 33-key ortholinear keyboard.
+
+* Keyboard Maintainer: [gtips](https://github.com/gtips)
+* Hardware Supported: REVIUNG33 PCB.
+* Hardware Availability: [PCB & Case Data](https://github.com/gtips/reviung/tree/master/reviung33)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make reviung33:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
A keyboards/reviung33/reviung33.c => keyboards/reviung33/reviung33.c +17 -0
@@ 0,0 1,17 @@
+/* Copyright 2020 gtips
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "reviung33.h"
A keyboards/reviung33/reviung33.h => keyboards/reviung33/reviung33.h +40 -0
@@ 0,0 1,40 @@
+/* Copyright 2020 gtips
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_reviung33( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
+ K30, K31, K32 \
+) \
+{ \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
+ { K30, K31, K32, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \
+}
A keyboards/reviung33/rules.mk => keyboards/reviung33/rules.mk +22 -0
@@ 0,0 1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = no # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output