@@ 0,0 1,239 @@
+#include QMK_KEYBOARD_H
+#include "bootloader.h"
+#ifdef PROTOCOL_LUFA
+ #include "lufa.h"
+ #include "split_util.h"
+#endif
+#ifdef SSD1306OLED
+ #include "ssd1306.h"
+#endif
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ LOWER,
+ RAISE,
+ ADJUST,
+ BACKLIT,
+ RGBRST
+};
+
+enum macro_keycodes {
+ KC_SAMPLEMACRO,
+};
+
+#define KC______ KC_TRNS
+#define KC_XXXXX KC_NO
+#define KC_LOWER LOWER
+#define KC_RAISE RAISE
+#define KC_RST RESET
+#define KC_LRST RGBRST
+#define KC_LTOG RGB_TOG
+#define KC_LHUI RGB_HUI
+#define KC_LHUD RGB_HUD
+#define KC_LSAI RGB_SAI
+#define KC_LSAD RGB_SAD
+#define KC_LVAI RGB_VAI
+#define KC_LVAD RGB_VAD
+#define KC_LMOD RGB_MOD
+#define KC_SFCPS SFT_T(KC_CAPS)
+#define KC_CTLTB CTL_T(KC_TAB)
+#define KC_GUIEI GUI_T(KC_LANG2)
+#define KC_ALTKN ALT_T(KC_LANG1)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_QWERTY] = LAYOUT_kc( \
+ //,-----------------------------------------. ,-----------------------------------------.
+ ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ SFCPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ CTLTB, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,\
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ GUIEI, LOWER, ENT, SPC, RAISE, ALTKN \
+ //`--------------------' `--------------------'
+ ),
+
+ [_LOWER] = LAYOUT_kc( \
+ //,-----------------------------------------. ,-----------------------------------------.
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ SFCPS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, ENT,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ CTLTB, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, RSFT,\
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ GUIEI, LOWER, ENT, SPC, RAISE, ALTKN \
+ //`--------------------' `--------------------'
+ ),
+
+ [_RAISE] = LAYOUT_kc( \
+ //,-----------------------------------------. ,-----------------------------------------.
+ TAB, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, BSPC,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ SFCPS, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, MINS, EQL, LCBR, RCBR, PIPE, BSLS,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ CTLTB, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, UNDS, PLUS, LBRC, RBRC, SLSH, RSFT,\
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ GUIEI, LOWER, ENT, SPC, RAISE, ALTKN \
+ //`--------------------' `--------------------'
+ ),
+
+ [_ADJUST] = LAYOUT_kc( \
+ //,-----------------------------------------. ,-----------------------------------------.
+ RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, LEFT, DOWN, UP, RIGHT, XXXXX, XXXXX,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, BRID, BRIU, VOLD, VOLU, MUTE, XXXXX,\
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ GUIEI, LOWER, ENT, SPC, RAISE, ALTKN \
+ //`--------------------' `--------------------'
+ )
+};
+
+int RGB_current_mode;
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+ if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+ layer_on(layer3);
+ } else {
+ layer_off(layer3);
+ }
+}
+
+void matrix_init_user(void) {
+ #ifdef RGBLIGHT_ENABLE
+ RGB_current_mode = rgblight_config.mode;
+ #endif
+ //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+ #ifdef SSD1306OLED
+ iota_gfx_init(!has_usb()); // turns on the display
+ #endif
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+// const char *read_mode_icon(bool swap);
+// const char *read_host_led_state(void);
+// void set_timelog(void);
+// const char *read_timelog(void);
+
+void matrix_scan_user(void) {
+ iota_gfx_task();
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+ if (is_master) {
+ // If you want to change the display of OLED, you need to change here
+ matrix_write_ln(matrix, read_layer_state());
+ matrix_write_ln(matrix, read_keylog());
+ matrix_write_ln(matrix, read_keylogs());
+ //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
+ //matrix_write_ln(matrix, read_host_led_state());
+ //matrix_write_ln(matrix, read_timelog());
+ } else {
+ matrix_write(matrix, read_logo());
+ }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+ if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+ memcpy(dest->display, source->display, sizeof(dest->display));
+ dest->dirty = true;
+ }
+}
+
+void iota_gfx_task_user(void) {
+ struct CharacterMatrix matrix;
+ matrix_clear(&matrix);
+ matrix_render_user(&matrix);
+ matrix_update(&display, &matrix);
+}
+#endif//SSD1306OLED
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ if (record->event.pressed) {
+#ifdef SSD1306OLED
+ set_keylog(keycode, record);
+#endif
+ // set_timelog();
+ }
+
+ switch (keycode) {
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ break;
+ case RGB_MOD:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ rgblight_mode(RGB_current_mode);
+ rgblight_step();
+ RGB_current_mode = rgblight_config.mode;
+ }
+ #endif
+ return false;
+ break;
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_mode = rgblight_config.mode;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
+