9 files changed, 10 insertions(+), 13 deletions(-)

M keyboards/ckeys/handwire_101/readme.md
M keyboards/keebio/bdn9/keymaps/codecoffeecode/rules.mk
M keyboards/kingly_keys/little_foot/keymaps/yanfali/rules.mk
M keyboards/montsinger/rebound/rev1/keymaps/curry/rules.mk
M keyboards/shapeshifter4060/keymaps/debug/readme.md
M keyboards/shapeshifter4060/readme.md
M layouts/community/split_3x6_3/drashna/rules.mk
M users/brandonschlack/process_records.c
M users/ericgebhart/rules.mk

@@ 14,7 14,7 @@ The laser cutting file is ideal for Ponoko's P1 board size.
 
 If you want to reflash the pre-installed firmware, use the `.bin` file for Proton C and the `.hex` file for Pro Micro builds. Flash with the QMK Toolbox or via the command line.
 
-Building for Proton C: `make ckeys/handwire_101:default CTPC=yes`
+Building for Proton C: `make ckeys/handwire_101:default CONVERT_TO=proton_c`
 Building for Pro Micro: `make ckeys/handwire_101:default`
 
 Pre-built firmware files (and laser cutting case files) can be found here: https://github.com/c-keys/handwire

@@ 1,4 1,4 @@
 MOUSEKEY_ENABLE = yes
 ifneq (, $(findstring rev1, $(KEYBOARD)))
-  CTPC = yes
+  CONVERT_TO=proton_c
 endif

@@ 1,4 1,4 @@
-CTPC=yes
+CONVERT_TO=proton_c
 CONSOLE_ENABLE = yes    # Console for debug
 COMMAND_ENABLE = yes     # Commands for debug and configuration
 AUDIO_ENABLE = yes

@@ 1,1 1,1 @@
-CTPC = yes
+CONVERT_TO=proton_c

@@ 12,7 12,7 @@ To compile and flash to the board:
     
 If you want to use this with a Proton C, do this instead:
 
-    make shapeshifter4060:debug CTPC=yes
+    make shapeshifter4060:debug CONVERT_TO=proton_c
 
 To just compile:
 

@@ 13,7 13,7 @@ Make example for this keyboard (after setting up your build environment):
     
 For use with the Proton C
     
-    make shapeshifter4060:default CTPC=yes
+    make shapeshifter4060:default CONVERT_TO=proton_c
     
 Flashing example for this keyboard:
 

@@ 22,9 22,6 @@ USE_ARM_CONFIG ?= no
 ifeq ($(strip $(CONVERT_TO)), proton_c)
     USE_ARM_CONFIG = yes
 endif
-ifeq ($(strip $(CTPC)), yes)
-    USE_ARM_CONFIG = yes
-endif
 ifeq ($(strip $(MCU)), STM32F303)
     USE_ARM_CONFIG = yes
 endif

@@ 141,14 141,14 @@ void matrix_scan_cmd_tab(void) {
  *
  * Sends 'qmk compile -kb keyboard -km keymap' command to compile firmware
  * Uses 'qmk flash' and resets keyboard, if flash_bootloader set to true
- * Sends CTPC and/or FORCE_LAYOUT parameters if built with those options
+ * Sends CONVERT_TO and/or FORCE_LAYOUT parameters if built with those options
  */
 void send_make_command(bool flash_bootloader) {
 #ifdef FORCE_LAYOUT // Add layout string if built with FORCE_LAYOUT
     SEND_STRING("FORCE_LAYOUT=" FORCE_LAYOUT " ");
 #endif
-#ifdef CONVERT_TO_PROTON_C // Add CTPC if built with CONVERT_TO_PROTON_C
-    SEND_STRING("CTPC=yes ");
+#ifdef CONVERT_TO_PROTON_C // Add CONVERT_TO if built with converter
+    SEND_STRING("CONVERT_TO=proton_c ");
 #endif
     SEND_STRING("qmk ");
     if (flash_bootloader) {

@@ 45,7 45,7 @@ VPATH += $(USER_PATH)/oled
 # SERIAL_DRIVER = usart
 # AUDIO_ENABLE = no
 # LTO_ENABLE = no
-# CONVERT_TO_PROTON_C = yes
+# CONVERT_TO=proton_c
 
 # so the keyboard's code doesn't add stuff we don't need.
 # when we use our own oled renders.