A keyboards/gmmk/numpad/config.h => keyboards/gmmk/numpad/config.h +84 -0
@@ 0,0 1,84 @@
+/* Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>
+ * Modified 2022 by rustedaperture for qmk_firmware
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define SLIDER_PIN B0
+#define MIDI_ADVANCED
+
+#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_RESYNC_ENABLE
+
+#define SPI_DRIVER SPIDQ
+#define SPI_SCK_PIN B3
+#define SPI_MOSI_PIN B5
+#define SPI_MISO_PIN B4
+
+#define DRIVER_1_CS B12
+#define DRIVER_1_EN A15
+#define DRIVER_1_PW_EN B13
+
+#define DRIVER_COUNT 1
+
+#define RGB_MATRIX_LED_COUNT 31
+
+#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B6
+#define WEAR_LEVELING_BACKING_SIZE 2048
+
+#define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_BREATHING
+#define ENABLE_RGB_MATRIX_BAND_SAT
+#define ENABLE_RGB_MATRIX_BAND_VAL
+#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#define ENABLE_RGB_MATRIX_CYCLE_ALL
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#define ENABLE_RGB_MATRIX_DUAL_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#define ENABLE_RGB_MATRIX_RAINDROPS
+#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#define ENABLE_RGB_MATRIX_HUE_BREATHING
+#define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#define ENABLE_RGB_MATRIX_HUE_WAVE
+#define ENABLE_RGB_MATRIX_PIXEL_RAIN
+#define ENABLE_RGB_MATRIX_PIXEL_FLOW
+#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#define ENABLE_RGB_MATRIX_SPLASH
+#define ENABLE_RGB_MATRIX_MULTISPLASH
+#define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH<
\ No newline at end of file
A keyboards/gmmk/numpad/halconf.h => keyboards/gmmk/numpad/halconf.h +26 -0
@@ 0,0 1,26 @@
+/* Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>
+ * Modified 2022 by rustedaperture for qmk_firmware
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_SPI TRUE
+#define SPI_USE_WAIT TRUE
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#define HAL_USE_ADC TRUE
+
+
+#include_next <halconf.h><
\ No newline at end of file
A keyboards/gmmk/numpad/info.json => keyboards/gmmk/numpad/info.json +51 -0
@@ 0,0 1,51 @@
+{
+ "keyboard_name": "GMMK Numpad",
+ "manufacturer": "Glorious",
+ "url": "https://www.gloriousgaming.com/products/gmmk-numpad",
+ "maintainer": "GloriousThrall",
+ "usb": {
+ "vid": "0x320F",
+ "pid": "0x5088",
+ "device_version": "0.0.1"
+ },
+ "encoder": {
+ "rotary": [
+ {"pin_a": "A2", "pin_b": "A1"}
+ ]
+ },
+ "processor": "WB32F3G71",
+ "bootloader": "wb32-dfu",
+ "diode_direction": "ROW2COL",
+ "matrix_pins": {
+ "rows": ["A3", "A4", "A5", "A6", "A7"],
+ "cols": ["B7", "B1", "B10", "B11"]
+ },
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"label": "NUM", "matrix": [0, 0], "x": 0, "y": 0},
+ {"label": "/", "matrix": [0, 1], "x": 1, "y": 0},
+ {"label": "*", "matrix": [0, 2], "x": 2, "y": 0},
+ {"label": "-", "matrix": [0, 3], "x": 3, "y": 0},
+
+ {"label": "7", "matrix": [1, 0], "x": 0, "y": 1},
+ {"label": "8", "matrix": [1, 1], "x": 1, "y": 1},
+ {"label": "9", "matrix": [1, 2], "x": 2, "y": 1},
+ {"label": "+", "matrix": [1, 3], "x": 3, "y": 1, "h": 2},
+
+ {"label": "4", "matrix": [2, 0], "x": 0, "y": 2},
+ {"label": "5", "matrix": [2, 1], "x": 1, "y": 2},
+ {"label": "6", "matrix": [2, 2], "x": 2, "y": 2},
+ {"label": "CALC", "matrix": [2, 3], "x": 3, "y": 2},
+
+ {"label": "1", "matrix": [3, 0], "x": 0, "y": 3},
+ {"label": "2", "matrix": [3, 1], "x": 1, "y": 3},
+ {"label": "3", "matrix": [3, 2], "x": 2, "y": 3},
+ {"label": "RET", "matrix": [3, 3], "x": 3, "y": 3, "h": 2},
+
+ {"label": "0", "matrix": [4, 0], "x": 0, "y": 4, "w": 2},
+ {"label": ".", "matrix": [4, 3], "x": 3, "y": 4}
+ ]
+ }
+ }
+}
A keyboards/gmmk/numpad/keymaps/default/keymap.c => keyboards/gmmk/numpad/keymaps/default/keymap.c +60 -0
@@ 0,0 1,60 @@
+/* Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>
+ * Modified 2022 by rustedaperture for qmk_firmware
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "analog.h"
+#include "qmk_midi.h"
+
+// clang-format off
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// NUM / * -
+// 7 8 9 +
+// 4 5 6 ENCODER
+// 1 2 3 RET
+// 0 .
+
+ [0] = LAYOUT(
+ MO(1), KC_PSLS, KC_PAST, KC_PMNS,
+ KC_P7, KC_P8, KC_P9, KC_PPLS,
+ KC_P4, KC_P5, KC_P6, KC_CALC,
+ KC_P1, KC_P2, KC_P3, KC_PENT,
+ KC_P0, KC_PDOT
+ ),
+ [1] = LAYOUT(
+ _______, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_P7, RGB_VAI, KC_P9, KC_PPLS,
+ RGB_RMOD, KC_P5, RGB_MOD, KC_CALC,
+ KC_P1, RGB_VAD, KC_P3, KC_PENT,
+ RGB_TOG, QK_BOOT
+ )
+};
+
+// Potentiometer Slider, MIDI Control
+
+uint8_t divisor = 0;
+
+void slider(void) {
+ if (divisor++) { /* only run the slider function 1/256 times it's called */
+ return;
+ }
+ midi_send_cc(&midi_device, 2, 0x3E, 0x7F + (analogReadPin(SLIDER_PIN) >> 3));
+}
+
+void housekeeping_task_user(void) {
+ slider();
+}<
\ No newline at end of file
A keyboards/gmmk/numpad/keymaps/via/keymap.c => keyboards/gmmk/numpad/keymaps/via/keymap.c +79 -0
@@ 0,0 1,79 @@
+/* Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>
+Modified 2022 by rustedaperture for qmk_firmware
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "analog.h"
+#include "qmk_midi.h"
+
+// clang-format off
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// NUM / * -
+// 7 8 9 +
+// 4 5 6 ENCODER
+// 1 2 3 RET
+// 0 .
+
+ [0] = LAYOUT(
+ MO(1), KC_PSLS, KC_PAST, KC_PMNS,
+ KC_P7, KC_P8, KC_P9, KC_PPLS,
+ KC_P4, KC_P5, KC_P6, KC_CALC,
+ KC_P1, KC_P2, KC_P3, KC_PENT,
+ KC_P0, KC_PDOT
+ ),
+ [1] = LAYOUT(
+ _______, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_P7, RGB_VAI, KC_P9, KC_PPLS,
+ RGB_RMOD, KC_P5, RGB_MOD, KC_CALC,
+ KC_P1, RGB_VAD, KC_P3, KC_PENT,
+ RGB_TOG, QK_BOOT
+ ),
+ [2] = LAYOUT(
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______
+ ),
+ [3] = LAYOUT(
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______
+ ),
+};
+// clang-format on
+
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
+ [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+ [1] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+ [2] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+ [3] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }
+};
+
+// Potentiometer Slider, MIDI Control
+
+uint8_t divisor = 0;
+
+void slider(void) {
+ if (divisor++) { /* only run the slider function 1/256 times it's called */
+ return;
+ }
+ midi_send_cc(&midi_device, 2, 0x3E, 0x7F + (analogReadPin(SLIDER_PIN) >> 3));
+}
+
+void housekeeping_task_user(void) {
+ slider();
+}<
\ No newline at end of file
A keyboards/gmmk/numpad/keymaps/via/rules.mk => keyboards/gmmk/numpad/keymaps/via/rules.mk +2 -0
@@ 0,0 1,2 @@
+VIA_ENABLE=yes
+ENCODER_MAP_ENABLE=yes
A keyboards/gmmk/numpad/matrix.c => keyboards/gmmk/numpad/matrix.c +133 -0
@@ 0,0 1,133 @@
+// Copyright 2023 Cameron Varley (@RustedAperture)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "debounce.h"
+#include "quantum.h"
+
+/* matrix state(1:on, 0:off) */
+extern matrix_row_t matrix[MATRIX_ROWS]; // debounced values
+extern matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values
+
+static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+#define MATRIX_ROW_SHIFTER ((matrix_row_t)1)
+
+static inline void setPinOutput_writeLow(pin_t pin) {
+ ATOMIC_BLOCK_FORCEON {
+ setPinOutput(pin);
+ writePinLow(pin);
+ }
+}
+
+static inline void setPinOutput_writeHigh(pin_t pin) {
+ ATOMIC_BLOCK_FORCEON {
+ setPinOutput(pin);
+ writePinHigh(pin);
+ }
+}
+
+static inline void setPinInputHigh_atomic(pin_t pin) {
+ ATOMIC_BLOCK_FORCEON {
+ setPinInputHigh(pin);
+ }
+}
+
+static inline uint8_t readMatrixPin(pin_t pin) {
+ if (pin != NO_PIN) {
+ return readPin(pin);
+ } else {
+ return 1;
+ }
+}
+
+static bool select_col(uint8_t col) {
+ pin_t pin = col_pins[col];
+ if (pin != NO_PIN) {
+ setPinOutput_writeLow(pin);
+ return true;
+ }
+ return false;
+}
+
+static void unselect_col(uint8_t col) {
+ pin_t pin = col_pins[col];
+ if (pin != NO_PIN) {
+# ifdef MATRIX_UNSELECT_DRIVE_HIGH
+ setPinOutput_writeHigh(pin);
+# else
+ setPinInputHigh_atomic(pin);
+# endif
+ }
+}
+
+static void unselect_cols(void) {
+ for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+ unselect_col(x);
+ }
+}
+
+
+__attribute__((weak)) void matrix_init_custom(void) {
+ unselect_cols();
+ for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+ if (row_pins[x] != NO_PIN) {
+ setPinInputHigh_atomic(row_pins[x]);
+ }
+ }
+ setPinInputHigh_atomic(B8);
+}
+
+__attribute__((weak)) void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col, matrix_row_t row_shifter) { // Start with a clear matrix row
+ bool key_pressed = false;
+
+ // Select col
+ if (!select_col(current_col)) { // select col
+ return; // skip NO_PIN col
+ }
+ matrix_output_select_delay();
+
+ // For each row...
+ for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) {
+ // Check row pin state
+ if (current_col == 3 && row_index == 2 && readMatrixPin(B8) == 1) {
+ current_matrix[row_index] |= row_shifter;
+ key_pressed = !readMatrixPin(B8);
+ } else if (readMatrixPin(row_pins[row_index]) == 0) {
+ // Pin LO, set col bit
+ current_matrix[row_index] |= row_shifter;
+ key_pressed = true;
+ } else {
+ // Pin HI, clear col bit
+ current_matrix[row_index] &= ~row_shifter;
+ }
+ }
+
+ // Unselect col
+ unselect_col(current_col);
+ matrix_output_unselect_delay(current_col, key_pressed); // wait for all Row signals to go HIGH
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+ static matrix_row_t temp_matrix[MATRIX_ROWS] = {0};
+
+ matrix_row_t row_shifter = MATRIX_ROW_SHIFTER;
+ for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+ matrix_read_rows_on_col(temp_matrix, current_col, row_shifter);
+ }
+
+ bool changed = memcmp(current_matrix, temp_matrix, sizeof(temp_matrix)) != 0;
+ if (changed) {
+ memcpy(current_matrix, temp_matrix, sizeof(temp_matrix));
+ }
+ return changed;
+}
A keyboards/gmmk/numpad/mcuconf.h => keyboards/gmmk/numpad/mcuconf.h +26 -0
@@ 0,0 1,26 @@
+/* Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>
+ * Modified 2022 by rustedaperture for qmk_firmware
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef WB32_SPI_USE_QSPI
+#define WB32_SPI_USE_QSPI TRUE
+
+// #undef WB32_ADC_USE_ADC1
+#define WB32_ADC_USE_ADC1 TRUE<
\ No newline at end of file
A keyboards/gmmk/numpad/numpad.c => keyboards/gmmk/numpad/numpad.c +136 -0
@@ 0,0 1,136 @@
+/* Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>
+ * Modified 2022 by rustedaperture for qmk_firmware
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "quantum.h"
+
+#ifdef RGB_MATRIX_ENABLE
+
+const aw_led g_aw_leds[RGB_MATRIX_LED_COUNT] = {
+/* Each AW20216 channel is controlled by a register at some offset between 0x00
+ * and 0xD7 inclusive.
+ * See drivers/awinic/aw20216.h for the mapping between register offsets and
+ * driver pin locations.
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, CS4_SW1, CS5_SW1, CS6_SW1 }, // 0 NUM
+ {0, CS4_SW2, CS5_SW2, CS6_SW2 }, // 1 /
+ {0, CS7_SW1, CS8_SW1, CS9_SW1 }, // 2 *
+ {0, CS7_SW2, CS8_SW2, CS9_SW2 }, // 3 -
+ {0, CS4_SW3, CS5_SW3, CS6_SW3 }, // 4 7
+ {0, CS4_SW4, CS5_SW4, CS6_SW4 }, // 5 8
+ {0, CS7_SW3, CS8_SW3, CS9_SW3 }, // 6 9
+ {0, CS7_SW4, CS8_SW4, CS9_SW4 }, // 7 +
+ {0, CS4_SW5, CS5_SW5, CS6_SW5 }, // 8 4
+ {0, CS4_SW6, CS5_SW6, CS6_SW6 }, // 9 5
+ {0, CS7_SW5, CS8_SW5, CS9_SW5 }, // 10 6
+ {0, CS4_SW7, CS5_SW7, CS6_SW7 }, // 11 1
+ {0, CS4_SW8, CS5_SW8, CS6_SW8 }, // 12 2
+ {0, CS7_SW7, CS8_SW7, CS9_SW7 }, // 13 3
+ {0, CS7_SW8, CS8_SW8, CS9_SW8 }, // 14 ENTER
+ {0, CS4_SW9, CS5_SW9, CS6_SW9 }, // 15 0
+ {0, CS7_SW9, CS8_SW9, CS9_SW9 }, // 16 .
+ {0, CS1_SW1, CS2_SW1, CS3_SW1 }, // 17 LED18
+ {0, CS1_SW2, CS2_SW2, CS3_SW2 }, // 18 LED19
+ {0, CS1_SW3, CS2_SW3, CS3_SW3 }, // 19 LED20
+ {0, CS1_SW4, CS2_SW4, CS3_SW4 }, // 20 LED21
+ {0, CS1_SW5, CS2_SW5, CS3_SW5 }, // 21 LED22
+ {0, CS1_SW6, CS2_SW6, CS3_SW6 }, // 22 LED23
+ {0, CS1_SW7, CS2_SW7, CS3_SW7 }, // 23 LED24
+ {0, CS10_SW1, CS11_SW1, CS12_SW1 }, // 24 LED27
+ {0, CS10_SW2, CS11_SW2, CS12_SW2 }, // 25 LED28
+ {0, CS10_SW3, CS11_SW3, CS12_SW3 }, // 26 LED29
+ {0, CS10_SW4, CS11_SW4, CS12_SW4 }, // 27 LED30
+ {0, CS10_SW5, CS11_SW5, CS12_SW5 }, // 28 LED31
+ {0, CS10_SW6, CS11_SW6, CS12_SW6 }, // 29 LED32
+ {0, CS10_SW7, CS11_SW7, CS12_SW7 }, // 30 LED33
+};
+
+led_config_t g_led_config = {{
+ { 0, 1, 2, 3 },
+ { 4, 5, 6, 7 },
+ { 8, 9, 10, NO_LED},
+ { 11, 12, 13, 14 },
+ { 15, NO_LED, NO_LED, 16 }
+}, {
+ {45, 0 }, // 0 NUM
+ {90, 0 }, // 1 /
+ {134, 0 }, // 2 *
+ {179, 0 }, // 3 -
+ {45, 16 }, // 4 7
+ {90, 16 }, // 5 8
+ {134, 16 }, // 6 9
+ {179, 24 }, // 7 +
+ {45, 32 }, // 8 4
+ {90, 32 }, // 9 5
+ {134, 32 }, // 10 6
+ {45, 48 }, // 11 1
+ {90, 48 }, // 12 2
+ {134, 48 }, // 13 3
+ {179, 56 }, // 14 ENTER
+ {67, 64 }, // 15 0
+ {134, 64 }, // 16 .
+ {0, 0 }, // 17 LED18
+ {0, 11 }, // 18 LED19
+ {0, 21 }, // 19 LED20
+ {0, 32 }, // 20 LED21
+ {0, 43 }, // 21 LED22
+ {0, 53 }, // 22 LED23
+ {0, 64 }, // 23 LED24
+ {224, 0 }, // 24 LED27
+ {224, 11 }, // 25 LED28
+ {224, 21 }, // 26 LED29
+ {224, 32 }, // 27 LED30
+ {224, 43 }, // 28 LED31
+ {224, 53 }, // 29 LED32
+ {224, 64 } // 30 LED33
+}, {
+ 4, 4, 4, 4,
+ 4, 4, 4, 4,
+ 4, 4, 4,
+ 4, 4, 4, 4,
+ 4, 4,
+ 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2
+} };
+
+# ifdef DRIVER_1_PW_EN
+
+void keyboard_pre_init_user(void) {
+ wait_ms(2000);
+ setPinOutput(DRIVER_1_PW_EN);
+ writePinHigh(DRIVER_1_PW_EN);
+}
+# endif
+
+#endif
+
+#ifdef ENCODER_ENABLE
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+ if (!encoder_update_user(index, clockwise)) {
+ return false;
+ }
+ if (clockwise) {
+ tap_code_delay(KC_VOLU, 10);
+ } else {
+ tap_code_delay(KC_VOLD, 10);
+ }
+ return true;
+}
+#endif
A keyboards/gmmk/numpad/post_config.h => keyboards/gmmk/numpad/post_config.h +21 -0
@@ 0,0 1,21 @@
+/* Copyright 2022 by rustedaperture
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#ifndef TAP_CODE_DELAY
+# define TAP_CODE_DELAY 10
+#endif<
\ No newline at end of file
A keyboards/gmmk/numpad/readme.md => keyboards/gmmk/numpad/readme.md +40 -0
@@ 0,0 1,40 @@
+# GMMK NUMPAD
+
+
+
+A 17 Key macropad made and sold by Glorious LLC, equipped with a WB32 microcontroller, with support for a rotary encoder.
+
+* Keyboard Maintainer: [GloriousThrall](https://github.com/GloriousThrall)
+* Hardware Supported: GMMK Numpad
+* Hardware Availability: [GloriousPCGaming.com](https://www.gloriousgaming.com/products/gmmk-numpad)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make gmmk/numpad:default
+
+Flashing example for this keyboard:
+
+ make gmmk/numpad:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the Num key and plug in the keyboard
+* **Keycode in layout**: Press the Num+Del key which is mapped to `QK_BOOT`
+* **Physical switch**: Pinhole located ubnde the zero key press while inserting the USB
+* **From Glorious Core Firmware**: Press Enter+Plus at the same time while plugging in the USB
+
+## Slider
+
+The slider is currently compatible with [Midi2Vol](https://github.com/jesusvallejo/Midi2Vol), [Midi Mixer (Windows)](https://github.com/jpwilliams/midi-mixer-releases/releases), [Midi2Lightroom (Mac)](https://rsjaffe.github.io/MIDI2LR/), and [ControllerMate (Mac)](https://www.orderedbytes.com/controllermate/)
+
+## Encoder Button
+
+The Button is set to KC_CALC by default and is located at 2,3 on the matrix
+
+## Broken
+
+* Bluetooth functionality<
\ No newline at end of file
A keyboards/gmmk/numpad/rules.mk => keyboards/gmmk/numpad/rules.mk +26 -0
@@ 0,0 1,26 @@
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+ENCODER_ENABLE = yes
+KEYBOARD_SHARED_EP = yes
+MIDI_ENABLE = yes
+
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = AW20216
+
+EEPROM_DRIVER = wear_leveling
+WEAR_LEVELING_DRIVER = spi_flash
+
+LTO_ENABLE = yes
+
+SRC += analog.c \
+ matrix.c<
\ No newline at end of file