A keyboards/evyd13/gud70/config.h => keyboards/evyd13/gud70/config.h +150 -0
@@ 0,0 1,150 @@
+/* Copyright 2020 Evelien Dekkers
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4705
+#define PRODUCT_ID 0x198B
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Evyd13
+#define PRODUCT Gud70
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS {D7,D6,D4,E6,B7}
+#define MATRIX_COL_PINS {D5,D3,D2,D1,D0,B4,B5,B6,C6,C7,F0,F1,F4,F5,F6,F7}
+#define UNUSED_PINS {}
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define LED_NUM_LOCK_PIN B2
+#define LED_CAPS_LOCK_PIN B1
+#define LED_SCROLL_LOCK_PIN B0
+#define LED_PIN_ON_STATE 0
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+// #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+// /*==== use exp() and sin() ====*/
+// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+// #define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+// #define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
A keyboards/evyd13/gud70/gud70.c => keyboards/evyd13/gud70/gud70.c +22 -0
@@ 0,0 1,22 @@
+/* Copyright 2020 Evelien Dekkers
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "gud70.h"
+
+void keyboard_pre_init_kb(void) {
+ // Enable top LED
+ setPinOutput(B3);
+ writePinLow(B3);
+}
A keyboards/evyd13/gud70/gud70.h => keyboards/evyd13/gud70/gud70.h +73 -0
@@ 0,0 1,73 @@
+/* Copyright 2020 Evelien Dekkers
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#define XXX KC_NO
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT_all( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k1d, k0d, k0e, k0f, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, k1f, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, \
+ k40, k41, k42, k47, k4a, k4b, k4c, k4d, k4e, k4f \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f }, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f }, \
+ { k40, k41, k42, XXX, XXX, XXX, XXX, k47, XXX, XXX, k4a, k4b, k4c, k4d, k4e, k4f } \
+}
+
+#define LAYOUT_ansi( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2c, k1e, k1f, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, k2f, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, \
+ k40, k41, k42, k47, k4a, k4b, k4c, k4d, k4e, k4f \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, k1e, k1f }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f }, \
+ { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f }, \
+ { k40, k41, k42, XXX, XXX, XXX, XXX, k47, XXX, XXX, k4a, k4b, k4c, k4d, k4e, k4f } \
+}
+
+#define LAYOUT_iso( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, k1f, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, \
+ k40, k41, k42, k47, k4a, k4b, k4c, k4d, k4e, k4f \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, k1e, k1f }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f }, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f }, \
+ { k40, k41, k42, XXX, XXX, XXX, XXX, k47, XXX, XXX, k4a, k4b, k4c, k4d, k4e, k4f } \
+}
A keyboards/evyd13/gud70/info.json => keyboards/evyd13/gud70/info.json +252 -0
@@ 0,0 1,252 @@
+{
+ "keyboard_name": "Gud70",
+ "url": "https://github.com/evyd13/gud70-pcb",
+ "maintainer": "evyd13",
+ "width": 17,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [
+ {"x":0, "y":0},
+ {"x":1, "y":0},
+ {"x":2, "y":0},
+ {"x":3, "y":0},
+ {"x":4, "y":0},
+ {"x":5, "y":0},
+ {"x":6, "y":0},
+ {"x":7, "y":0},
+ {"x":8, "y":0},
+ {"x":9, "y":0},
+ {"x":10, "y":0},
+ {"x":11, "y":0},
+ {"x":12, "y":0},
+ {"x":13, "y":0},
+ {"x":14, "y":0},
+ {"x":15, "y":0},
+ {"x":16, "y":0},
+
+ {"x":0, "y":1, "w":1.5},
+ {"x":1.5, "y":1},
+ {"x":2.5, "y":1},
+ {"x":3.5, "y":1},
+ {"x":4.5, "y":1},
+ {"x":5.5, "y":1},
+ {"x":6.5, "y":1},
+ {"x":7.5, "y":1},
+ {"x":8.5, "y":1},
+ {"x":9.5, "y":1},
+ {"x":10.5, "y":1},
+ {"x":11.5, "y":1},
+ {"x":12.5, "y":1},
+ {"x":13.5, "y":1, "w":1.5},
+ {"x":15, "y":1},
+ {"x":16, "y":1},
+
+ {"x":0, "y":2, "w":1.75},
+ {"x":1.75, "y":2},
+ {"x":2.75, "y":2},
+ {"x":3.75, "y":2},
+ {"x":4.75, "y":2},
+ {"x":5.75, "y":2},
+ {"x":6.75, "y":2},
+ {"x":7.75, "y":2},
+ {"x":8.75, "y":2},
+ {"x":9.75, "y":2},
+ {"x":10.75, "y":2},
+ {"x":11.75, "y":2},
+ {"x":12.75, "y":2, "w":2.25},
+ {"x":15, "y":2},
+ {"x":16, "y":2},
+
+ {"x":0, "y":3, "w":1.25},
+ {"x":1.25, "y":3},
+ {"x":2.25, "y":3},
+ {"x":3.25, "y":3},
+ {"x":4.25, "y":3},
+ {"x":5.25, "y":3},
+ {"x":6.25, "y":3},
+ {"x":7.25, "y":3},
+ {"x":8.25, "y":3},
+ {"x":9.25, "y":3},
+ {"x":10.25, "y":3},
+ {"x":11.25, "y":3},
+ {"x":12.25, "y":3, "w":1.75},
+ {"x":14, "y":3},
+ {"x":15, "y":3},
+ {"x":16, "y":3},
+
+ {"x":0, "y":4, "w":1.5},
+ {"x":1.5, "y":4},
+ {"x":2.5, "y":4, "w":1.5},
+ {"x":4, "y":4, "w":6},
+ {"x":10, "y":4, "w":1.5},
+ {"x":11.5, "y":4},
+ {"x":12.5, "y":4, "w":1.5},
+ {"x":14, "y":4},
+ {"x":15, "y":4},
+ {"x":16, "y":4}
+ ]
+ },
+ "LAYOUT_ansi": {
+ "layout": [
+ {"x":0, "y":0},
+ {"x":1, "y":0},
+ {"x":2, "y":0},
+ {"x":3, "y":0},
+ {"x":4, "y":0},
+ {"x":5, "y":0},
+ {"x":6, "y":0},
+ {"x":7, "y":0},
+ {"x":8, "y":0},
+ {"x":9, "y":0},
+ {"x":10, "y":0},
+ {"x":11, "y":0},
+ {"x":12, "y":0},
+ {"x":13, "y":0, "w":2},
+ {"x":15, "y":0},
+ {"x":16, "y":0},
+
+ {"x":0, "y":1, "w":1.5},
+ {"x":1.5, "y":1},
+ {"x":2.5, "y":1},
+ {"x":3.5, "y":1},
+ {"x":4.5, "y":1},
+ {"x":5.5, "y":1},
+ {"x":6.5, "y":1},
+ {"x":7.5, "y":1},
+ {"x":8.5, "y":1},
+ {"x":9.5, "y":1},
+ {"x":10.5, "y":1},
+ {"x":11.5, "y":1},
+ {"x":12.5, "y":1},
+ {"x":13.5, "y":1, "w":1.5},
+ {"x":15, "y":1},
+ {"x":16, "y":1},
+
+ {"x":0, "y":2, "w":1.75},
+ {"x":1.75, "y":2},
+ {"x":2.75, "y":2},
+ {"x":3.75, "y":2},
+ {"x":4.75, "y":2},
+ {"x":5.75, "y":2},
+ {"x":6.75, "y":2},
+ {"x":7.75, "y":2},
+ {"x":8.75, "y":2},
+ {"x":9.75, "y":2},
+ {"x":10.75, "y":2},
+ {"x":11.75, "y":2},
+ {"x":12.75, "y":2, "w":2.25},
+ {"x":15, "y":2},
+ {"x":16, "y":2},
+
+ {"x":0, "y":3, "w":2.25},
+ {"x":2.25, "y":3},
+ {"x":3.25, "y":3},
+ {"x":4.25, "y":3},
+ {"x":5.25, "y":3},
+ {"x":6.25, "y":3},
+ {"x":7.25, "y":3},
+ {"x":8.25, "y":3},
+ {"x":9.25, "y":3},
+ {"x":10.25, "y":3},
+ {"x":11.25, "y":3},
+ {"x":12.25, "y":3, "w":1.75},
+ {"x":14, "y":3},
+ {"x":15, "y":3},
+ {"x":16, "y":3},
+
+ {"x":0, "y":4, "w":1.5},
+ {"x":1.5, "y":4},
+ {"x":2.5, "y":4, "w":1.5},
+ {"x":4, "y":4, "w":6},
+ {"x":10, "y":4, "w":1.5},
+ {"x":11.5, "y":4},
+ {"x":12.5, "y":4, "w":1.5},
+ {"x":14, "y":4},
+ {"x":15, "y":4},
+ {"x":16, "y":4}
+ ]
+ },
+ "LAYOUT_iso": {
+ "layout": [
+ {"x":0, "y":0},
+ {"x":1, "y":0},
+ {"x":2, "y":0},
+ {"x":3, "y":0},
+ {"x":4, "y":0},
+ {"x":5, "y":0},
+ {"x":6, "y":0},
+ {"x":7, "y":0},
+ {"x":8, "y":0},
+ {"x":9, "y":0},
+ {"x":10, "y":0},
+ {"x":11, "y":0},
+ {"x":12, "y":0},
+ {"x":13, "y":0, "w":2},
+ {"x":15, "y":0},
+ {"x":16, "y":0},
+
+ {"x":0, "y":1, "w":1.5},
+ {"x":1.5, "y":1},
+ {"x":2.5, "y":1},
+ {"x":3.5, "y":1},
+ {"x":4.5, "y":1},
+ {"x":5.5, "y":1},
+ {"x":6.5, "y":1},
+ {"x":7.5, "y":1},
+ {"x":8.5, "y":1},
+ {"x":9.5, "y":1},
+ {"x":10.5, "y":1},
+ {"x":11.5, "y":1},
+ {"x":12.5, "y":1},
+ {"x":15, "y":1},
+ {"x":16, "y":1},
+
+ {"x":0, "y":2, "w":1.75},
+ {"x":1.75, "y":2},
+ {"x":2.75, "y":2},
+ {"x":3.75, "y":2},
+ {"x":4.75, "y":2},
+ {"x":5.75, "y":2},
+ {"x":6.75, "y":2},
+ {"x":7.75, "y":2},
+ {"x":8.75, "y":2},
+ {"x":9.75, "y":2},
+ {"x":10.75, "y":2},
+ {"x":11.75, "y":2},
+ {"x":12.75, "y":2},
+ {"x":13.75, "y":1, "w":1.25, "h":2},
+ {"x":15, "y":2},
+ {"x":16, "y":2},
+
+ {"x":0, "y":3, "w":1.25},
+ {"x":1.25, "y":3},
+ {"x":2.25, "y":3},
+ {"x":3.25, "y":3},
+ {"x":4.25, "y":3},
+ {"x":5.25, "y":3},
+ {"x":6.25, "y":3},
+ {"x":7.25, "y":3},
+ {"x":8.25, "y":3},
+ {"x":9.25, "y":3},
+ {"x":10.25, "y":3},
+ {"x":11.25, "y":3},
+ {"x":12.25, "y":3, "w":1.75},
+ {"x":14, "y":3},
+ {"x":15, "y":3},
+ {"x":16, "y":3},
+
+ {"x":0, "y":4, "w":1.5},
+ {"x":1.5, "y":4},
+ {"x":2.5, "y":4, "w":1.5},
+ {"x":4, "y":4, "w":6},
+ {"x":10, "y":4, "w":1.5},
+ {"x":11.5, "y":4},
+ {"x":12.5, "y":4, "w":1.5},
+ {"x":14, "y":4},
+ {"x":15, "y":4},
+ {"x":16, "y":4}
+ ]
+ }
+ }
+}<
\ No newline at end of file
A keyboards/evyd13/gud70/keymaps/default/keymap.c => keyboards/evyd13/gud70/keymaps/default/keymap.c +37 -0
@@ 0,0 1,37 @@
+/* Copyright 2020 Evelien Dekkers
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_all(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, TO(2), KC_PGUP,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, KC_PGDN,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT),
+ [1] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+ [2] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, KC_PMNS, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PAST, _______, _______, TO(0), _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_P0, _______, KC_PDOT, KC_PSLS, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+};
A keyboards/evyd13/gud70/keymaps/evyd13/keymap.c => keyboards/evyd13/gud70/keymaps/evyd13/keymap.c +31 -0
@@ 0,0 1,31 @@
+/* Copyright 2020 Evelien Dekkers
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_all(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_MPLY, KC_PGUP,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), KC_PGDN,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT, KC_APP),
+ [1] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+};
A keyboards/evyd13/gud70/readme.md => keyboards/evyd13/gud70/readme.md +20 -0
@@ 0,0 1,20 @@
+# Gud70
+
+A replacement PCB for the Uniqey C70.
+
+* Keyboard Maintainer: [Evyd13](https://github.com/evyd13)
+* Hardware Supported: Gud70 PCB
+* Hardware Availability: [Open source on GitHub](https://github.com/evyd13/gud70-pcb)
+
+
+To flash a new layout, press the reset button located under the space bar.
+
+Make example for this keyboard (after setting up your build environment):
+
+ make evyd13/gud70:default
+
+Flashing example for this keyboard:
+
+ make evyd13/gud70:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
A keyboards/evyd13/gud70/rules.mk => keyboards/evyd13/gud70/rules.mk +22 -0
@@ 0,0 1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = qmk-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output