3 files changed, 61 insertions(+), 2 deletions(-)

A keyboards/hhkb/ansi/32u2/rules.mk
M keyboards/hhkb/ansi/hhkb_avr.h
M keyboards/hhkb/ansi/rules.mk

@@ 0,0 1,5 @@
+# MCU name
+MCU = atmega32u2
+
+CONSOLE_ENABLE = no   # Console for debug
+COMMAND_ENABLE = no   # Commands for debug and configuration

@@ 78,6 78,60 @@ static inline void KEY_SELECT(uint8_t ROW, uint8_t COL)
 
 }
 
+#elif defined(__AVR_ATmega32U2__)
+/*
+ * For TMK HHKB alt controller(ATMega32U4)
+ *
+ * row:     PB0-2
+ * col:     PB3-5,6
+ * key:     PD3(pull-uped)
+ * prev:    PB7
+ * power:   PD4(L:off/H:on)
+ * row-ext: PC6,7 for HHKB JP(active low)
+ */
+static inline void KEY_ENABLE(void) { (PORTB &= ~(1<<6)); }
+static inline void KEY_UNABLE(void) { (PORTB |=  (1<<6)); }
+static inline bool KEY_STATE(void) { return (PIND & (1<<3)); }
+static inline void KEY_PREV_ON(void) { (PORTB |=  (1<<7)); }
+static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); }
+#ifdef HHKB_POWER_SAVING
+static inline void KEY_POWER_ON(void) {
+    DDRB = 0xFF; PORTB = 0x40;          // change pins output
+    DDRD |= (1<<4); PORTD |= (1<<4);    // MOS FET switch on
+    /* Without this wait you will miss or get false key events. */
+    _delay_ms(5);                       // wait for powering up
+}
+static inline void KEY_POWER_OFF(void) {
+    /* input with pull-up consumes less than without it when pin is open. */
+    DDRB = 0x00; PORTB = 0xFF;          // change pins input with pull-up
+    DDRD |= (1<<4); PORTD &= ~(1<<4);   // MOS FET switch off
+}
+static inline bool KEY_POWER_STATE(void) { return PORTD & (1<<4); }
+#else
+static inline void KEY_POWER_ON(void) {}
+static inline void KEY_POWER_OFF(void) {}
+static inline bool KEY_POWER_STATE(void) { return true; }
+#endif
+static inline void KEY_INIT(void)
+{
+    /* row,col,prev: output */
+    DDRB  = 0xFF;
+    PORTB = 0x40;   // unable
+    /* key: input with pull-up */
+    DDRD  &= ~0x80;
+    PORTD |=  0x80;
+
+    KEY_UNABLE();
+    KEY_PREV_OFF();
+
+    KEY_POWER_OFF();
+}
+static inline void KEY_SELECT(uint8_t ROW, uint8_t COL)
+{
+    PORTB = (PORTB & 0xC0) | (((COL) & 0x07)<<3) | ((ROW) & 0x07);
+
+}
+
 
 #elif defined(__AVR_AT90USB1286__)
 /*

@@ 14,9 14,9 @@ CONSOLE_ENABLE = yes   # Console for debug
 COMMAND_ENABLE = yes   # Commands for debug and configuration
 CUSTOM_MATRIX = yes    # Custom matrix file for the HHKB
 NKRO_ENABLE = no            # Enable N-Key Rollover
-# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
 
-# HHKB_RN42_ENABLE = yes  # Enable support for hasu's BT alt controller -- code borrowed from tmk source tree.
+HHKB_RN42_ENABLE = no  # Enable support for hasu's BT alt controller -- code borrowed from tmk source tree.
 
 # Either uncomment the HHKB_RN42_ENABLE line above, or run make enabling the
 # feature. Be sure to clean any existing build before trying to enable rn42