D keyboards/boardsource/3x4/3x4.c => keyboards/boardsource/3x4/3x4.c +0 -1
@@ 1,1 0,0 @@
-#include "3x4.h"
D keyboards/boardsource/3x4/3x4.h => keyboards/boardsource/3x4/3x4.h +0 -12
@@ 1,12 0,0 @@
-#pragma once
-
-#include "quantum.h"
-#define LAYOUT( \
- K00, K01, K02, K03, \
- K10, K11, K12, K13, \
- K20, K21, K22, K23 \
- ) { \
- {K00, K01, K02, K03}, \
- {K10, K11, K12, K13}, \
- {K20, K21, K22, K23} \
- }
D keyboards/boardsource/3x4/config.h => keyboards/boardsource/3x4/config.h +0 -70
@@ 1,70 0,0 @@
-
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x4273 // "Bs" - Boardsource
-#define PRODUCT_ID 0x0304 // 3x4
-#define DEVICE_VER 0x0000
-#define MANUFACTURER Boardsource
-#define PRODUCT 3x4
-
-/* key matrix size */
-#define MATRIX_ROWS 3
-#define MATRIX_COLS 4
-
-#define MATRIX_ROW_PINS {F7, F6, F5}
-#define MATRIX_COL_PINS {B6, B2, B3, B1}
-
-#define DIODE_DIRECTION COL2ROW
-
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
M keyboards/boardsource/3x4/info.json => keyboards/boardsource/3x4/info.json +37 -24
@@ 1,27 1,40 @@
{
- "keyboard_name": "boardsource 4x3",
- "url": "https://boardsource.xyz",
- "maintainer": "boardsource",
- "layouts": {
-
- "LAYOUT": {
-
- "layout": [
- { "label": "K01", "x": 0, "y": 0 },
- { "label": "K02", "x": 1, "y": 0 },
- { "label": "K03", "x": 2, "y": 0 },
- { "label": "K04", "x": 3, "y": 0 },
-
- { "label": "K05", "x": 0, "y": 1 },
- { "label": "K06", "x": 1, "y": 1 },
- { "label": "K07", "x": 2, "y": 1 },
- { "label": "K08", "x": 3, "y": 1 },
-
- { "label": "K09", "x": 0, "y": 2 },
- { "label": "K10", "x": 1, "y": 2 },
- { "label": "K11", "x": 2, "y": 2 },
- { "label": "K12", "x": 3, "y": 2 }
- ]
- }
+ "manufacturer": "Boardsource",
+ "keyboard_name": "3x4",
+ "maintainer": "waffle87",
+ "development_board": "promicro",
+ "diode_direction": "COL2ROW",
+ "features": {
+ "bootmagic": true,
+ "extrakey": true,
+ "mousekey": true
+ },
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1"],
+ "rows": ["F7", "F6", "F5"]
+ },
+ "url": "https://boardsource.xyz/store/5ecc2008eee64242946c98c1",
+ "usb": {
+ "device_version": "1.0.0",
+ "pid": "0x0304",
+ "vid": "0x4273"
+ },
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ { "matrix": [0, 0], "x": 0, "y": 0 },
+ { "matrix": [0, 1], "x": 1, "y": 0 },
+ { "matrix": [0, 2], "x": 2, "y": 0 },
+ { "matrix": [0, 3], "x": 3, "y": 0 },
+ { "matrix": [1, 0], "x": 0, "y": 1 },
+ { "matrix": [1, 1], "x": 1, "y": 1 },
+ { "matrix": [1, 2], "x": 2, "y": 1 },
+ { "matrix": [1, 3], "x": 3, "y": 1 },
+ { "matrix": [2, 0], "x": 0, "y": 2 },
+ { "matrix": [2, 1], "x": 1, "y": 2 },
+ { "matrix": [2, 2], "x": 2, "y": 2 },
+ { "matrix": [2, 3], "x": 3, "y": 2 }
+ ]
}
+ }
}
M keyboards/boardsource/3x4/keymaps/default/keymap.c => keyboards/boardsource/3x4/keymaps/default/keymap.c +7 -17
@@ 1,26 1,16 @@
+// Copyright 2022 @waffle87
+// SPDX-License-Identifier: GPL-2.0-or-later
#include QMK_KEYBOARD_H
-enum layers {
- _MAIN,
- _RAISE,
- _LOWER,
-};
-
-// Readability keycodes
-#define LOWER MO(_LOWER)
-#define RAISE MO(_RAISE)
-
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- [_MAIN] = LAYOUT(
- KC_0, KC_1, KC_4, KC_7,
- KC_ENT, KC_2, KC_5, KC_8,
- RAISE, KC_3, KC_6, KC_9
+ [0] = LAYOUT(
+ KC_0, KC_1, KC_4, KC_7,
+ KC_ENT, KC_2, KC_5, KC_8,
+ MO(1), KC_3, KC_6, KC_9
),
- [_RAISE] = LAYOUT(
+ [1] = LAYOUT(
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, QK_BOOT
)
-
};
M keyboards/boardsource/3x4/keymaps/via/keymap.c => keyboards/boardsource/3x4/keymaps/via/keymap.c +22 -21
@@ 1,25 1,26 @@
+// Copyright 2022 @gwillad
+// SPDX-License-Identifier: GPL-2.0-or-later
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- LAYOUT(
- KC_0, KC_1, KC_4, KC_7,
- KC_ENT, KC_2, KC_5, KC_8,
- MO(1), KC_3, KC_6, KC_9
- ),
- LAYOUT(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT
- ),
- LAYOUT(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
- ),
- LAYOUT(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
- )
+ [0] = LAYOUT(
+ KC_0, KC_1, KC_4, KC_7,
+ KC_ENT, KC_2, KC_5, KC_8,
+ MO(1), KC_3, KC_6, KC_9
+ ),
+ [1] = LAYOUT(
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, QK_BOOT
+ ),
+ [2] = LAYOUT(
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______
+ ),
+ [3] = LAYOUT(
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______
+ )
};
D keyboards/boardsource/3x4/keymaps/via/readme.md => keyboards/boardsource/3x4/keymaps/via/readme.md +0 -5
@@ 1,5 0,0 @@
-# The via keymap for boardsource 3x4 macropad
-
-This folder contains the [VIA](https://caniusevia.com/) configuration for the boardsource 3x4 macropad
-
-Maintained by: [gwillad](https://github.com/gwillad)
M keyboards/boardsource/3x4/rules.mk => keyboards/boardsource/3x4/rules.mk +1 -17
@@ 1,17 1,1 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = no # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-AUDIO_ENABLE = no # Audio output
+# This file intentionally left blank