9 files changed, 329 insertions(+), 0 deletions(-)

A keyboards/qvex/lynepad/config.h
A keyboards/qvex/lynepad/info.json
A keyboards/qvex/lynepad/keymaps/default/keymap.c
A keyboards/qvex/lynepad/keymaps/default/readme.md
A keyboards/qvex/lynepad/lynepad.c
A keyboards/qvex/lynepad/lynepad.h
A keyboards/qvex/lynepad/readme.md
A keyboards/qvex/lynepad/rules.mk
A keyboards/qvex/readme.md

@@ 0,0 1,63 @@
+/*
+Copyright 2020 KemoNine
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5156
+#define PRODUCT_ID      0x4C50
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    QVEX
+#define PRODUCT         Lynepad
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 4
+
+/* Basic matrix config */
+#define MATRIX_ROW_PINS { C7, F7, F6}
+#define MATRIX_COL_PINS { F0, F1, F4, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Encoders */
+#define ENCODERS_PAD_A { D0, B5 }
+#define ENCODERS_PAD_B { D1, D6 }
+
+/* LEDs */
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+#undef RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 4
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 240
+#endif
+
+/* Definitions for encoder tilt/press support */
+#define ENC_TILT_THRESHOLD 1
+#define PIN_TW_SW D2 // Center
+#define PIN_RJ_SW C6 // Center
+#define PIN_RJ_DIR_A D4 // Up
+#define PIN_RJ_DIR_B D7 // Left
+#define PIN_RJ_DIR_C B6 // Down
+#define PIN_RJ_DIR_D B4 // Right

@@ 0,0 1,12 @@
+{
+    "keyboard_name": "QVEX Lynepad",
+    "url": "https://www.tindie.com/products/qvex_tech/qvex-lynepad-macro-keypad/",
+    "maintainer": "KemoNine",
+    "width": 4,
+    "height": 3,
+    "layouts": {
+      "LAYOUT": {
+        "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}]
+      }
+    }
+  }<
\ No newline at end of file

@@ 0,0 1,117 @@
+/* Copyright 2020 KemoNine
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap (Base Layer) Default Layer
+   * |----------------------------|
+   * | 1 | 2  | 3  | 4 |          |
+   * | 5 | 6  | 7  | 8 |          |
+   * | 9 | 10 | 11 |              |
+   * |----------------------------|
+   */
+[0] = LAYOUT(
+  KC_MS_BTN4,   KC_MS_BTN2,   KC_MS_UP,    KC_MS_BTN1,
+  KC_MS_BTN5,   KC_MS_LEFT,   KC_MS_DOWN,  KC_MS_RIGHT,
+  KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2
+  )
+};
+
+// Standard encoder functionality
+void encoder_update_user(uint8_t index, bool clockwise) {
+    // Process encoder rotational movements
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            tap_code(KC_AUDIO_VOL_DOWN);
+        } else {
+            tap_code(KC_AUDIO_VOL_UP);
+        }
+    } else if (index == 1) { /* Second encoder */
+        if (clockwise) {
+            tap_code(KC_MS_WH_UP);
+        } else {
+            tap_code(KC_MS_WH_DOWN);
+        }
+    }
+}
+
+// Encoder press / tilt event handling
+// the core lynepad implementation will update the below variables on each matrix scan
+// Update the various codes below for customizing the tilt / push config
+
+extern int16_t enc1Center;
+extern int16_t enc1CenterPrev;
+extern int16_t enc2Center;
+extern int16_t enc2CenterPrev;
+extern int16_t enc2Up;
+extern int16_t enc2UpPrev;
+extern int16_t enc2Down;
+extern int16_t enc2DownPrev;
+extern int16_t enc2Left;
+extern int16_t enc2LeftPrev;
+extern int16_t enc2Right;
+extern int16_t enc2RightPrev;
+
+void matrix_scan_user(void) {
+    if (enc1Center != enc1CenterPrev) {
+        if (enc1Center < ENC_TILT_THRESHOLD) {
+        }
+        else {
+            reset_keyboard();
+        }
+    }
+    if (enc2Center != enc2CenterPrev) {
+        if (enc2Center < ENC_TILT_THRESHOLD) {
+            register_code16(KC_MS_BTN3);
+        }
+        else {
+            unregister_code16(KC_MS_BTN3);
+        }
+        /*
+         * Encoder sets ALL values when center is pressed so bail out at this point\
+         * to avoid the rest of the encoder buttons registering events
+         */
+        return;
+    }
+    if (enc2Up != enc2UpPrev) {
+        if (enc2Up < ENC_TILT_THRESHOLD) {
+        }
+        else {
+            rgblight_increase_val_noeeprom();
+        }
+    }
+    if (enc2Down != enc2DownPrev) {
+        if (enc2Down < ENC_TILT_THRESHOLD) {
+        }
+        else {
+            rgblight_decrease_val_noeeprom();
+        }
+    }
+    if (enc2Left != enc2LeftPrev) {
+        if (enc2Left < ENC_TILT_THRESHOLD) {
+        }
+        else {
+            rgblight_toggle_noeeprom();
+        }
+    }
+    if (enc2Right != enc2RightPrev) {
+        if (enc2Right < ENC_TILT_THRESHOLD) {
+        }
+        else {
+            rgblight_step_noeeprom();
+        }
+    }
+}

@@ 0,0 1,1 @@
+# The default keymap for lynepad

@@ 0,0 1,58 @@
+/*
+Copyright 2020 KemoNine
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "lynepad.h"
+
+void keyboard_pre_init_kb(void) {
+    // Encoder pins
+    setPinInput(PIN_TW_SW);
+    setPinInput(PIN_RJ_SW);
+    setPinInput(PIN_RJ_DIR_A);
+    setPinInput(PIN_RJ_DIR_C);
+    setPinInput(PIN_RJ_DIR_B);
+    setPinInput(PIN_RJ_DIR_D);
+
+    keyboard_pre_init_user();
+}
+
+int16_t enc1Center = 1;
+int16_t enc1CenterPrev = 1;
+int16_t enc2Center = 1;
+int16_t enc2CenterPrev = 1;
+int16_t enc2Up = 1;
+int16_t enc2UpPrev = 1;
+int16_t enc2Down = 1;
+int16_t enc2DownPrev = 1;
+int16_t enc2Left = 1;
+int16_t enc2LeftPrev = 1;
+int16_t enc2Right = 1;
+int16_t enc2RightPrev = 1;
+
+void matrix_scan_kb(void) {
+    enc1CenterPrev = enc1Center;
+    enc1Center = readPin(PIN_TW_SW);
+
+    enc2CenterPrev = enc2Center;
+    enc2Center = readPin(PIN_RJ_SW);
+    enc2UpPrev = enc2Up;
+    enc2Up = readPin(PIN_RJ_DIR_A);
+    enc2DownPrev = enc2Down;
+    enc2Down = readPin(PIN_RJ_DIR_C);
+    enc2LeftPrev = enc2Left;
+    enc2Left = readPin(PIN_RJ_DIR_B);
+    enc2RightPrev = enc2Right;
+    enc2Right = readPin(PIN_RJ_DIR_D);
+
+    // Ensure any user customizations are called (for some reason this wasn't happening by default)
+    matrix_scan_user();
+}

@@ 0,0 1,37 @@
+/* Copyright 2020 KemoNine
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01, k02, k03,           \
+    k10, k11, k12, k13,           \
+    k20, k21, k22                 \
+) \
+{ \
+    { k00,   k01,   k02,   k03   }, \
+    { k10,   k11,   k12,   k13   }, \
+    { k20,   k21,   k22,   KC_NO }  \
+}

@@ 0,0 1,13 @@
+# QVEX Lynepad
+
+Macro pad with 11 keys and 2 rotary encoders.
+
+* Keyboard Maintainer: [KemoNine](https://git.kemonine.info/kemonine/keyboard)
+* Hardware Supported: QVEX Lynepad: macro keypad
+* Hardware Availability: Tindie [Keyboard Kit](https://www.tindie.com/products/qvex_tech/qvex-lynepad-macro-keypad/)
+
+Make example for this macro pad (after setting up your build environment):
+
+    make qvex/lynepad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

@@ 0,0 1,21 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+ENCODER_ENABLE = yes        # Enable the encoders

@@ 0,0 1,7 @@
+# QVEX
+
+QVEX is a keyboard vendor based in Czechia
+
+## Online Stores
+
+**Website:** https://www.tindie.com/products/qvex_tech/qvex-lynepad-macro-keypad/