A => +58 -0
@@ 0,0 1,58 @@
/* Copyright 2019 Garret G. (TheRoyalSweatshirt)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.#pragma once
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER Kingly-Keys
#define PRODUCT The Little Foot
#define DESCRIPTION A Mighty Small, 45-Percent, Ortholinear Keyboard.
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 10
/* key matrix pins */
#define MATRIX_ROW_PINS { F6, B6, B2, B3, B1 }
#define MATRIX_COL_PINS { F5, F7, B5, B4, E6, D7, C6, D4, D0, D1 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
#define FORCE_NKRO
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN F4
#define RGBLED_NUM 10 // Number of LEDs
#define RGBLIGHT_ANIMATIONS
#define RGBLIGHT_HUE_STEP 6
#define RGBLIGHT_SAT_STEP 4
#define RGBLIGHT_VAL_STEP 8
A => +16 -0
@@ 0,0 1,16 @@
{
"keyboard_name": "Little Foot",
"url": "",
"maintainer": "TheRoyalSweatshirt",
"width": 10,
"height": 5,
"layouts": {
"LAYOUT_split_space_base": {
"key_count": 44,
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":2}, {"x":5, "y":4, "w":2}, {"x":7, "y":4, "w":1.5}]
},
"LAYOUT_big_space_base": {
"key_count": 41,
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":1.5, "y":4, "w":7}]
}
}
A => +40 -0
@@ 0,0 1,40 @@
#include QMK_KEYBOARD_H
// Layer names
enum{
// - Base layer:
_BASE,
// - Symbols, numbers, and functions:
_FN,
// - Alternate Function layer:
_LN
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_split_space_base(
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_ENT,
MO(_FN), KC_LSHIFT, KC_SPACE, RGB_MOD
),
[_FN] = LAYOUT_split_space_base(
LT(_LN, KC_ESC), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_BSPC,
KC_TAB, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LSFT(KC_MINS), KC_BSLS,
KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_LALT, KC_TRNS, KC_LCTRL
),
[_LN] = LAYOUT_split_space_base(
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9,
KC_TRNS, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6,
KC_TRNS, KC_F7, KC_F8, KC_F9, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3,
KC_TRNS, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};
A => +1 -0
@@ 0,0 1,1 @@
#include "little_foot.h"
A => +35 -0
@@ 0,0 1,35 @@
#pragma once
#include "quantum.h"
#define XXX KC_NO
#define LAYOUT_split_space_base( \
k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, \
k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, \
k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, \
k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, \
k42, k46, k47, k49 \
) \
{ \
{ k01, k02, k03, k04, k05, k06, k07, k08, k09, k010 }, \
{ k11, k12, k13, k14, k15, k16, k17, k18, k19, k110 }, \
{ k21, k22, k23, k24, k25, k26, k27, k28, k29, k210 }, \
{ k31, k32, k33, k34, k35, k36, k37, k38, k39, k310 }, \
{ XXX, k42, XXX, XXX, XXX, k46, k47, XXX, k49, XXX } \
}
#define LAYOUT_big_space_base( \
k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, \
k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, \
k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, \
k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, \
k46 \
) \
{ \
{ k01, k02, k03, k04, k05, k06, k07, k08, k09, k010 }, \
{ k11, k12, k13, k14, k15, k16, k17, k18, k19, k110 }, \
{ k21, k22, k23, k24, k25, k26, k27, k28, k29, k210 }, \
{ k31, k32, k33, k34, k35, k36, k37, k38, k39, k310 }, \
{ XXX, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, XXX } \
}
A => +17 -0
@@ 0,0 1,17 @@
# Little Foot
===
A mighty small keyboard.
Keyboard Maintainer: Garret G. - a.k.a. [The_Royal](https://www.reddit.com/user/The_Royal/) on Reddit, and [TheRoyalSweatshirt](https://github.com/TheRoyalSweatshirt) on GitHub
Hardware Supported: Little_Foot Rev1.2 & Rev1.4, Pro-Micro, and Elite-C
Hardware Availability: Through GB or Direct Message
Make example for this keyboard (after setting up your build environment):
make kingly_keys/little_foot:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
A => +25 -0
@@ 0,0 1,25 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# atmega32a bootloadHID
BOOTLOADER = caterina
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
AUDIO_ENABLE = no
RGBLIGHT_ENABLE = yes
R keyboards/romac/config.h => keyboards/kingly_keys/romac/config.h +0 -0
R keyboards/romac/info.json => keyboards/kingly_keys/romac/info.json +0 -0
R keyboards/romac/keymaps/default/keymap.c => keyboards/kingly_keys/romac/keymaps/default/keymap.c +2 -2
@@ 25,13 25,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_7, KC_8, KC_9, \
KC_4, KC_5, KC_6, \
KC_1, KC_2, KC_3, \
- MO(_FN1), KC_0, KC_ENT \
+ MO(1), KC_0, KC_DOT \
),
[_FN1] = LAYOUT(
KC_TRNS, KC_HOME, KC_PGUP, \
KC_TRNS, KC_END, KC_PGDN, \
KC_TRNS, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_DOT \
+ KC_TRNS, KC_TRNS, KC_ENT \
)
};
R keyboards/romac/keymaps/jarred/keymap.c => keyboards/kingly_keys/romac/keymaps/jarred/keymap.c +0 -0
R keyboards/romac/keymaps/stanrc85/config.h => keyboards/kingly_keys/romac/keymaps/stanrc85/config.h +0 -0
R keyboards/romac/keymaps/stanrc85/keymap.c => keyboards/kingly_keys/romac/keymaps/stanrc85/keymap.c +0 -0
R keyboards/romac/keymaps/stanrc85/rules.mk => keyboards/kingly_keys/romac/keymaps/stanrc85/rules.mk +0 -0
R keyboards/romac/readme.md => keyboards/kingly_keys/romac/readme.md +0 -0
R keyboards/romac/romac.c => keyboards/kingly_keys/romac/romac.c +0 -0
R keyboards/romac/romac.h => keyboards/kingly_keys/romac/romac.h +0 -0
A keyboards/kingly_keys/romac/rules.mk => keyboards/kingly_keys/romac/rules.mk +26 -0
@@ 0,0 1,26 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = caterina
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+
A keyboards/kingly_keys/romac_plus/config.h => keyboards/kingly_keys/romac_plus/config.h +46 -0
@@ 0,0 1,46 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER TheRoyalSweatshirt
+#define PRODUCT RoMac+
+#define DESCRIPTION A *Plaid inspired twelve-key macropad with upgraded features
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 3
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C6, D4, D2, D3 }
+#define MATRIX_COL_PINS { F6, F5, F4 }
+#define UNUSED_PINS
+
+#define ENCODERS_PAD_A { B3 }
+#define ENCODERS_PAD_B { B2 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 0
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN F7
+#define RGBLED_NUM 4 // Number of LEDs
+
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 6
+#define RGBLIGHT_SAT_STEP 4
+#define RGBLIGHT_VAL_STEP 8
A keyboards/kingly_keys/romac_plus/info.json => keyboards/kingly_keys/romac_plus/info.json +13 -0
@@ 0,0 1,13 @@
+{
+ "keyboard_name": "RoMac+",
+ "url": "",
+ "maintainer": "TheRoyalSweatshirt",
+ "width": 3,
+ "height": 4,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 12,
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}]
+ }
+ }
+}
A keyboards/kingly_keys/romac_plus/keymaps/default/keymap.c => keyboards/kingly_keys/romac_plus/keymaps/default/keymap.c +65 -0
@@ 0,0 1,65 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+#define BASE 0
+#define FN 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [BASE] = LAYOUT(
+ KC_7, KC_8, KC_9,
+ KC_4, KC_5, KC_6,
+ KC_1, KC_2, KC_3,
+ MO(1), KC_0, KC_DOT
+ ),
+
+ [FN] = LAYOUT(
+ KC_TRNS, KC_HOME, KC_PGUP,
+ KC_TRNS, KC_END, KC_PGDN,
+ KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_ENT
+ )
+};
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+ return OLED_ROTATION_270; // flips the display 180 degrees if offhand
+}
+
+void oled_task_user(void) {
+ // Host Keyboard Layer Status
+ oled_write_P(PSTR("Let's\nbuild\nsome-\nthing\nto-\nget-\nher!"), false);
+ switch (get_highest_layer(layer_state)) {
+ case BASE:
+ oled_write_ln_P(PSTR(""), false);
+ break;
+ case FN:
+ oled_write_ln_P(PSTR("FN"), false);
+ break;
+ default:
+ // Or use the write_ln shortcut over adding '\n' to the end of your string
+ oled_write_ln_P(PSTR("Undef"), false);
+ }
+
+ // Host Keyboard LED Status
+ uint8_t led_usb_state = host_keyboard_leds();
+ oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR("NLCK ") : PSTR(" "), false);
+ oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR("CAPS ") : PSTR(" "), false);
+ oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR(" "), false);
+}
+#endif
A keyboards/kingly_keys/romac_plus/readme.md => keyboards/kingly_keys/romac_plus/readme.md +16 -0
@@ 0,0 1,16 @@
+
+# RoMac+
+
+
+
+An Upgraded “Plaid” Inspired 12-Key (3x4) Macropad With Fancy Features.
+
+- Keyboard Maintainer: [Garret G.](https://github.com/TheRoyalSweatshirt)
+- Hardware Supported: RoMac+ Rev3.0, Pro Micro, Elite-C, Proton C, BlueMicro.
+- Hardware Availability: Through Online Store [Kingly-Keys](https://kingly-keys.xyz/) (Stock Varies).
+
+Make example for this keyboard (after setting up your build environment):
+
+ make romac_plus:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
A keyboards/kingly_keys/romac_plus/romac_plus.c => keyboards/kingly_keys/romac_plus/romac_plus.c +2 -0
@@ 0,0 1,2 @@
+#include "romac_plus.h"
+ <
\ No newline at end of file
A keyboards/kingly_keys/romac_plus/romac_plus.h => keyboards/kingly_keys/romac_plus/romac_plus.h +16 -0
@@ 0,0 1,16 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ K00, K01, K02, \
+ K10, K11, K12, \
+ K20, K21, K22, \
+ K30, K31, K32 \
+) \
+{ \
+ { K00, K01, K02 }, \
+ { K10, K11, K12 }, \
+ { K20, K21, K22 }, \
+ { K30, K31, K32 } \
+}
A keyboards/kingly_keys/romac_plus/rules.mk => keyboards/kingly_keys/romac_plus/rules.mk +24 -0
@@ 0,0 1,24 @@
+MCU = atmega32u4
+
+BOOTLOADER = caterina
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
+ENCODER_ENABLE = yes # Enable support for EC11 Rotary Encoder
+OLED_DRIVER_ENABLE = yes # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C
R keyboards/ropro/config.h => keyboards/kingly_keys/ropro/config.h +3 -1
@@ 53,6 53,8 @@
/* ws2812 RGB LED --- DIN Pin Routed to VIA on main PCB marked "RGB" */
#define RGB_DI_PIN D3
+#define RGBLED_NUM 18
+
#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 16
+
R keyboards/ropro/info.json => keyboards/kingly_keys/ropro/info.json +0 -0
R keyboards/ropro/keymaps/default/keymap.c => keyboards/kingly_keys/ropro/keymaps/default/keymap.c +9 -9
@@ 30,9 30,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - |
- * |+------+------+------+------+-----+------+------+------+------+------+------+------|--------------.
- * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | Rotary Click |
- * ,------+------+------+------+------+------+------+------+------+------+------+------+------|--------------'
+ * |+------+------+------+------+-----+------+------+------+------+------+------+------|
+ * RotEn | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
+ * ,------+------+------+------+------+------+------+------+------+------+------+------+------|
* | PgUp | Ctrl | A | S | D | F | G | H | J | K | L | ; | " |
* |------+------+------+------+------+------+-------------+------+------+------+------+------|
* | Lower| Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
@@ 43,9 43,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS,
-KC_CAPS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ KC_NO, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
KC_PGUP, KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
- LOWER, KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
+ KC_HOME, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
KC_PGDN, KC_DEL, KC_RCTRL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, KC_END, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
),
@@ 54,9 54,9 @@ KC_CAPS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y,
* |TOGRGB| | | |Sat(-)|Hue(-)|Hue(+)|Sat(+)| | |Brght-|Brght+|
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | ` | | | | | | | | | | | = |
- * |+------+------+------+------+-----+------+------+------+------+------+------+------|--------------.
- * | | | Up | | | | | | | [ | ] | \ | NumLock |
- * ,------+------+------+------+------+------+------+------+------+------+------+------+------|--------------'
+ * |+------+------+------+------+-----+------+------+------+------+------+------+------|
+ * RotEn | | | Up | | | | | | | [ | ] | \ |
+ * ,------+------+------+------+------+------+------+------+------+------+------+------+------|
* | Home | | Left | Down |Right | | | | | | | | |
* |------+------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | | | | | | | | | | |
@@ 67,7 67,7 @@ KC_CAPS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y,
[_LOWER] = LAYOUT(
RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAD, RGB_HUD, RGB_HUI, RGB_SAI, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI,
KC_GRAVE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_EQUAL,
-KC_NLCK, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_NLCK, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_BSLS,
KC_HOME, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR
R keyboards/ropro/keymaps/default/readme.md => keyboards/kingly_keys/ropro/keymaps/default/readme.md +0 -0
R keyboards/ropro/readme.md => keyboards/kingly_keys/ropro/readme.md +0 -0
R keyboards/ropro/ropro.c => keyboards/kingly_keys/ropro/ropro.c +0 -0
R keyboards/ropro/ropro.h => keyboards/kingly_keys/ropro/ropro.h +0 -0
R keyboards/ropro/rules.mk => keyboards/kingly_keys/ropro/rules.mk +2 -36
@@ 1,41 1,6 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Bootloader selection
# Teensy halfkay
@@ 43,7 8,8 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = caterina
A keyboards/kingly_keys/smd_milk/2_milk.c => keyboards/kingly_keys/smd_milk/2_milk.c +16 -0
@@ 0,0 1,16 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "smd_milk.h"
A keyboards/kingly_keys/smd_milk/2_milk.h => keyboards/kingly_keys/smd_milk/2_milk.h +26 -0
@@ 0,0 1,26 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ K00, \
+ K01 \
+) { \
+ { K00 }, \
+ { K01 } \
+}
A keyboards/kingly_keys/smd_milk/config.h => keyboards/kingly_keys/smd_milk/config.h +56 -0
@@ 0,0 1,56 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xB195
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Kingly-Keys
+#define PRODUCT SMD-2% Milk
+#define DESCRIPTION The SMD Ed. of the Milk themed 2% Keyboard by rionlion100
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 1
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C5, D2 }
+#define MATRIX_COL_PINS { D3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+#define FORCE_NKRO
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN B3
+#define RGBLED_NUM 4 // Number of LEDs
+
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 6
+#define RGBLIGHT_SAT_STEP 4
+#define RGBLIGHT_VAL_STEP 10<
\ No newline at end of file
A keyboards/kingly_keys/smd_milk/info.json => keyboards/kingly_keys/smd_milk/info.json +15 -0
@@ 0,0 1,15 @@
+{
+ "keyboard_name": "smd_milk",
+ "keyboard_folder": "kinlgy_keys/smd_milk",
+ "url": "",
+ "maintainer": "TheRoyalSweatshirt",
+ "width": 1,
+ "height": 2,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 2,
+ "layout": [ {"x": 0, "y": 0 }, {"x": 0, "y": 1 }]
+ }
+ }
+}
+
A keyboards/kingly_keys/smd_milk/keymaps/default/keymap.c => keyboards/kingly_keys/smd_milk/keymaps/default/keymap.c +8 -0
@@ 0,0 1,8 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT(
+ KC_HOME,
+ KC_END
+ )
+};
A keyboards/kingly_keys/smd_milk/readme.md => keyboards/kingly_keys/smd_milk/readme.md +21 -0
@@ 0,0 1,21 @@
+# 2% Milk
+
+
+
+An SMD Version of the 2% Meme board themed around a milk carton and love
+
+Keyboard Maintainer: [Garret G.](https://github.com/TheRoyalSweatshirt) a.k.a. [/u/The_Royal](https://www.reddit.com/user/The_Royal)
+Hardware Availability: Through GB
+
+Make example for this keyboard (after setting up your build environment):
+
+ make kingly_keys/smd_milk:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+### Credits
++ Original Concept by rionlion100
++ Case design by Soft
++ Original 2% Milk PCB by PyroL
++ new SMD PCB by The_Royal
++ Name by jetpacktuxedo
A keyboards/kingly_keys/smd_milk/rules.mk => keyboards/kingly_keys/smd_milk/rules.mk +26 -0
@@ 0,0 1,26 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE = yes # This can be enabled if a ws2812 strip is connected to the expansion port.
A keyboards/kingly_keys/smd_milk/smd_milk.c => keyboards/kingly_keys/smd_milk/smd_milk.c +16 -0
@@ 0,0 1,16 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "smd_milk.h"
A keyboards/kingly_keys/smd_milk/smd_milk.h => keyboards/kingly_keys/smd_milk/smd_milk.h +26 -0
@@ 0,0 1,26 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ K00, \
+ K01 \
+) { \
+ { K00 }, \
+ { K01 } \
+}
A keyboards/kingly_keys/soap/README.md => keyboards/kingly_keys/soap/README.md +16 -0
@@ 0,0 1,16 @@
+SOAP
+===
+
+
+
+A Sanitary, "SOAP" Themed, Macro Pad by [Garret G.](https://github.com/TheRoyalSweatshirt) a.k.a. [/u/The_Royal](https://www.reddit.com/user/The_Royal)
+
+Keyboard Maintainer: [Garret G.](https://github.com/TheRoyalSweatshirt) a.k.a. [/u/The_Royal](https://www.reddit.com/user/The_Royal/) of Reddit.
+Hardware Supported: SOAP rev1.0, rev2.0 PCB
+Hardware Availability: [Kingly-Keys.xyz](https://kingly-keys.xyz/) - (Through GB)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make kingly_keys/soap:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs)
A keyboards/kingly_keys/soap/config.h => keyboards/kingly_keys/soap/config.h +54 -0
@@ 0,0 1,54 @@
+/* Copyright 2019 Garret G. (TheRoyalSweatshirt)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.#pragma once
+ */
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0003
+#define DEVICE_VER 0x0004
+#define MANUFACTURER Kingly-Keys
+#define PRODUCT SOAP
+#define DESCRIPTION A Sanitary "Soap" Themed Macropad with Rotary Encoder
+
+ /* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 4
+
+#define ENCODERS_PAD_A { D6 }
+#define ENCODERS_PAD_B { D7 }
+
+ /* key matrix pins */
+#define MATRIX_ROW_PINS { C7, C6 }
+#define MATRIX_COL_PINS { F4, F1, F0, D5 }
+#define UNUSED_PINS
+
+ /* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+ /* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+ /* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED --- DIN Pin Routed to VIA on main PCB marked "RGB" */
+#define RGB_DI_PIN B6
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 3
A keyboards/kingly_keys/soap/info.json => keyboards/kingly_keys/soap/info.json +13 -0
@@ 0,0 1,13 @@
+{
+ "keyboard_name": "soap",
+ "url": "https://github.com/TheRoyalSweatshirt/SOAP",
+ "maintainer": "[TheRoyalSweatshirt](https://github.com/TheRoyalSweatshirt)",
+ "width": 4,
+ "height": 2,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 8,
+ "layout": [{"label":"K00", "x":0, "y":0}, {"label":"K01", "x":1, "y":0}, {"label":"K02", "x":2, "y":0}, {"label":"K03", "x":4, "y":0}, {"label":"K10", "x":0, "y":1}, {"label":"K11", "x":1, "y":1}, {"label":"K12", "x":2, "y":1}, {"label":"K13", "x":4, "y":1}]
+ }
+ }
+}
A keyboards/kingly_keys/soap/keymaps/default/keymap.c => keyboards/kingly_keys/soap/keymaps/default/keymap.c +62 -0
@@ 0,0 1,62 @@
+/* Copyright 2019 Garret G. (TheRoyalSweatshirt)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+#define BASE 0
+#define FN 1
+#define RGB RGB_MOD
+#define XXX KC_NO
+#define KC_TR KC_TRANSPARENT
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* BASE
+ * ,----------------------------------------.
+ * | DEL | UP | ENTER | | RGB |
+ * |-------+-------+-------+-------+--------|
+ * | LEFT | DOWN | RIGHT | | FN |
+ * `----------------------------------------'
+ */
+ [BASE] = LAYOUT(
+ KC_DEL, KC_UP, KC_ENT, RGB,
+ KC_LEFT, KC_DOWN, KC_RIGHT, MO(1)
+ ),
+
+ /* FN
+ * ,----------------------------------------.
+ * | HU+ | Br+ | Sat+ | | |
+ * |-------+-------+-------+-------+--------|
+ * | HU- | Br- | Sat- | | |
+ * `----------------------------------------'
+ */
+ [FN] = LAYOUT(
+ RGB_HUI, RGB_VAI, RGB_SAI, KC_TR,
+ RGB_HUD, RGB_VAD, RGB_SAD, KC_TR
+ )
+};
+
+ /* Rotary Encoder Settings: */
+ /* - Current Value = Horizontal Scrolling */
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+ if (index == 0) {
+ if (clockwise) {
+ tap_code(KC_WH_L);
+ } else {
+ tap_code(KC_WH_R);
+ }
+ }
+}
A keyboards/kingly_keys/soap/rules.mk => keyboards/kingly_keys/soap/rules.mk +32 -0
@@ 0,0 1,32 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI controls
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+ENCODER_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+LAYOUTS_HAS_RGB = yes
A keyboards/kingly_keys/soap/soap.c => keyboards/kingly_keys/soap/soap.c +1 -0
@@ 0,0 1,1 @@
+#include "soap.h"
A keyboards/kingly_keys/soap/soap.h => keyboards/kingly_keys/soap/soap.h +32 -0
@@ 0,0 1,32 @@
+/* Copyright 2019 Garret G. (TheRoyalSweatshirt)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Note: Matrix is a little wacky with the rotary encoder click mapping being
+ * on the opposite side of the board. Remember to pay attention to
+ * the 13th column where the lone key mapped for rotary encoder click (K132).
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+
+#define LAYOUT( \
+ K00, K01, K02, K03, \
+ K10, K11, K12, K13 \
+) { \
+ { K00, K01, K02, K03 }, \
+ { K10, K11, K12, K13 } \
+}
D keyboards/romac/rules.mk => keyboards/romac/rules.mk +0 -57
@@ 1,57 0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = no
-