Add EVO70 R2 Keyboard (#21321)
11 files changed, 566 insertions(+), 0 deletions(-) A keyboards/custommk/evo70_r2/config.h A keyboards/custommk/evo70_r2/halconf.h A keyboards/custommk/evo70_r2/info.json A keyboards/custommk/evo70_r2/keymaps/default/keymap.c A keyboards/custommk/evo70_r2/keymaps/via/config.h A keyboards/custommk/evo70_r2/keymaps/via/keymap.c A keyboards/custommk/evo70_r2/keymaps/via/rules.mk A keyboards/custommk/evo70_r2/matrix.c A keyboards/custommk/evo70_r2/mcuconf.h A keyboards/custommk/evo70_r2/readme.md A keyboards/custommk/evo70_r2/rules.mk
A keyboards/custommk/evo70_r2/config.h => keyboards/custommk/evo70_r2/config.h +90 -0
@@ 0,0 1,90 @@ /* Copyright 2023 David Hoelscher (@customMK) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once // No VBUS sense needed #define BOARD_OTG_NOVBUSSENS 1 #define STM32_LSECLK 32768 #define MATRIX_ROWS 5 #define MATRIX_COLS 16 #define MATRIX_ROW_PINS { A8, A1, A2, B1, A7 } // FRAM configuration #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A0 #define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 4 // 48MHz / 4 = 12MHz; max supported by MB85R64 is 20MHz // External flash configuration #define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B12 #define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 1 // 48MHz; max supported by W25Q128JV is 133MHz #define EXTERNAL_FLASH_SIZE (16 * 1024 * 1024) //128Mbit or 16MByte #define EXTERNAL_FLASH_SPI_TIMEOUT 200000 //datasheet max is 200seconds for flash chip erase // SPI Configuration #define SPI_DRIVER SPID1 #define SPI_SCK_PIN B3 #define SPI_SCK_PAL_MODE 5 #define SPI_MOSI_PIN B5 #define SPI_MOSI_PAL_MODE 5 #define SPI_MISO_PIN B4 #define SPI_MISO_PAL_MODE 5 // SPI LCD Configuration #define LCD_RST_PIN B2 #define LCD_CS_PIN A9 #define LCD_DC_PIN B0 #ifndef LCD_ACTIVITY_TIMEOUT #define LCD_ACTIVITY_TIMEOUT 30000 #endif // I2C OLED Configuration #define I2C1_SCL_PIN B6 #define I2C1_SDA_PIN B9 #define I2C1_CLOCK_SPEED 400000 #define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 #define OLED_DISABLE_TIMEOUT #define COL_SHIFT_IN_PIN B14 #define COL_SHIFT_CLK_PIN B15 #define QUANTUM_PAINTER_SUPPORTS_256_PALETTE TRUE #define QUANTUM_PAINTER_SUPPORTS_NATIVE_COLORS TRUE #define OLED_UPDATE_INTERVAL 66 #define BACKLIGHT_PWM_DRIVER PWMD3 #define BACKLIGHT_PWM_CHANNEL 1 #define BACKLIGHT_PAL_MODE 2 #define WS2812_PWM_DRIVER PWMD1 #define WS2812_PWM_CHANNEL 3 #define WS2812_PWM_PAL_MODE 1 #define WS2812_DMA_STREAM STM32_DMA2_STREAM5 #define WS2812_DMA_CHANNEL 6 #define TAP_CODE_DELAY 10 #define AUDIO_PIN B8 #define AUDIO_PWM_DRIVER PWMD4 #define AUDIO_PWM_CHANNEL 3 #define AUDIO_PWM_PAL_MODE 2 #define AUDIO_STATE_TIMER GPTD5 #define AUDIO_INIT_DELAY
A keyboards/custommk/evo70_r2/halconf.h => keyboards/custommk/evo70_r2/halconf.h +36 -0
@@ 0,0 1,36 @@ /* Copyright 2023 David Hoelscher (@customMK) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #define HAL_USE_I2C TRUE #define HAL_USE_PWM TRUE #define HAL_USE_RTC TRUE #define HAL_USE_SPI TRUE #define HAL_USE_GPT TRUE #define SPI_SELECT_MODE SPI_SELECT_MODE_PAD #define SERIAL_BUFFERS_SIZE 256 // This enables interrupt-driven mode #define SPI_USE_WAIT TRUE #include_next <halconf.h>
A keyboards/custommk/evo70_r2/info.json => keyboards/custommk/evo70_r2/info.json +152 -0
@@ 0,0 1,152 @@ { "keyboard_name": "EVO70 R2", "url": "https://shop.custommk.com/collections/evo70/products/evo70", "maintainer": "customMK", "manufacturer": "customMK", "tags": ["70%", "encoder", "underglow", "backlight"], "features": { "bootmagic": true, "command": false, "console": false, "extrakey": true, "mousekey": true, "nkro": true, "encoder": true, "quantum_painter": true, "oled": true, "rgblight": true, "backlight": true, "audio": true }, "usb": { "vid": "0xF35B", "pid": "0xFAB6", "device_version": "1.0.0" }, "diode_direction": "ROW2COL", "processor": "STM32F411", "bootloader": "stm32-dfu", "rgblight": { "led_count": 48, "hue_steps": 4, "saturation_steps": 8, "brightness_steps": 4, "max_brightness": 128, "layers": { "enabled": true }, "animations": { "alternating": true, "breathing": true, "christmas": true, "knight": true, "rainbo_mood": true, "rainbow_swirl": true, "rgb_test": true, "snake": true, "static_gradient": true, "twinkle": true } }, "ws2812": { "driver": "pwm", "pin": "A10" }, "backlight": { "driver": "pwm", "breathing": true, "breathing_period": 6, "levels": 17, "pin": "A6" }, "layouts": { "LAYOUT": { "layout": [ {"label":"Encoder", "matrix": [1, 0], "x":0.5, "y":0}, {"label":"Esc", "matrix": [0, 0], "x":2.5, "y":0}, {"label":"1", "matrix": [0, 2], "x":3.5, "y":0}, {"label":"2", "matrix": [0, 3], "x":4.5, "y":0}, {"label":"3", "matrix": [0, 4], "x":5.5, "y":0}, {"label":"4", "matrix": [0, 5], "x":6.5, "y":0}, {"label":"5", "matrix": [0, 6], "x":7.5, "y":0}, {"label":"6", "matrix": [0, 7], "x":8.5, "y":0}, {"label":"7", "matrix": [0, 8], "x":9.5, "y":0}, {"label":"8", "matrix": [0, 9], "x":10.5, "y":0}, {"label":"9", "matrix": [0, 10], "x":11.5, "y":0}, {"label":"0", "matrix": [0, 11], "x":12.5, "y":0}, {"label":"-", "matrix": [0, 12], "x":13.5, "y":0}, {"label":"=", "matrix": [0, 13], "x":14.5, "y":0}, {"label":"Backspace", "matrix": [0, 14], "x":15.5, "y":0, "w":2}, {"label":"Delete", "matrix": [0, 15], "x":17.5, "y":0}, {"label":"Tab", "matrix": [1, 1], "x":2.5, "y":1, "w":1.5}, {"label":"Q", "matrix": [1, 2], "x":4, "y":1}, {"label":"W", "matrix": [1, 3], "x":5, "y":1}, {"label":"E", "matrix": [1, 4], "x":6, "y":1}, {"label":"R", "matrix": [1, 5], "x":7, "y":1}, {"label":"T", "matrix": [1, 6], "x":8, "y":1}, {"label":"Y", "matrix": [1, 7], "x":9, "y":1}, {"label":"U", "matrix": [1, 8], "x":10, "y":1}, {"label":"I", "matrix": [1, 9], "x":11, "y":1}, {"label":"O", "matrix": [1, 10], "x":12, "y":1}, {"label":"P", "matrix": [1, 11], "x":13, "y":1}, {"label":"[", "matrix": [1, 12], "x":14, "y":1}, {"label":"]", "matrix": [1, 13], "x":15, "y":1}, {"label":"\\", "matrix": [1, 14], "x":16, "y":1, "w":1.5}, {"label":"PgUp", "matrix": [1, 15], "x":17.5, "y":1}, {"label":"F1", "matrix": [2, 2], "x":0, "y":2}, {"label":"F2", "matrix": [2, 0], "x":1, "y":2}, {"label":"Caps Lock", "matrix": [2, 1], "x":2.5, "y":2, "w":1.75}, {"label":"A", "matrix": [2, 3], "x":4.25, "y":2}, {"label":"S", "matrix": [2, 4], "x":5.25, "y":2}, {"label":"D", "matrix": [2, 5], "x":6.25, "y":2}, {"label":"F", "matrix": [2, 6], "x":7.25, "y":2}, {"label":"G", "matrix": [2, 7], "x":8.25, "y":2}, {"label":"H", "matrix": [2, 8], "x":9.25, "y":2}, {"label":"J", "matrix": [2, 9], "x":10.25, "y":2}, {"label":"K", "matrix": [2, 10], "x":11.25, "y":2}, {"label":"L", "matrix": [2, 11], "x":12.25, "y":2}, {"label":";", "matrix": [2, 12], "x":13.25, "y":2}, {"label":"'", "matrix": [2, 13], "x":14.25, "y":2}, {"label":"Enter", "matrix": [2, 14], "x":15.25, "y":2, "w":2.25}, {"label":"PgDn", "matrix": [2, 15], "x":17.5, "y":2}, {"label":"F3", "matrix": [3, 1], "x":0, "y":3}, {"label":"F4", "matrix": [3, 0], "x":1, "y":3}, {"label":"Shift", "matrix": [3, 2], "x":2.5, "y":3, "w":1.25}, {"label":"\u2298", "matrix": [0, 1], "x":3.75, "y":3, "w":1}, {"label":"Z", "matrix": [3, 3], "x":4.75, "y":3}, {"label":"X", "matrix": [3, 4], "x":5.75, "y":3}, {"label":"C", "matrix": [3, 5], "x":6.75, "y":3}, {"label":"V", "matrix": [3, 6], "x":7.75, "y":3}, {"label":"B", "matrix": [3, 7], "x":8.75, "y":3}, {"label":"N", "matrix": [3, 8], "x":9.75, "y":3}, {"label":"M", "matrix": [3, 9], "x":10.75, "y":3}, {"label":",", "matrix": [3, 10], "x":11.75, "y":3}, {"label":".", "matrix": [3, 11], "x":12.75, "y":3}, {"label":"/", "matrix": [3, 12], "x":13.75, "y":3}, {"label":"Shift", "matrix": [3, 13], "x":14.75, "y":3, "w":1.75}, {"label":"Up", "matrix": [3, 14], "x":16.5, "y":3}, {"label":"End", "matrix": [3, 15], "x":17.5, "y":3}, {"label":"F5", "matrix": [4, 3], "x":0, "y":4}, {"label":"F6", "matrix": [4, 0], "x":1, "y":4}, {"label":"Ctrl", "matrix": [4, 1], "x":2.5, "y":4, "w":1.25}, {"label":"GUI", "matrix": [4, 2], "x":3.75, "y":4, "w":1.25}, {"label":"Alt", "matrix": [4, 4], "x":5, "y":4, "w":1.25}, {"label":"Space", "matrix": [4, 7], "x":6.25, "y":4, "w":6.25}, {"label":"Alt", "matrix": [4, 10], "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "matrix": [4, 11], "x":13.75, "y":4, "w":1.25}, {"label":"Left", "matrix": [4, 13], "x":15.5, "y":4}, {"label":"Down", "matrix": [4, 14], "x":16.5, "y":4}, {"label":"Right", "matrix": [4, 15], "x":17.5, "y":4} ] } }, "encoder": { "rotary": [ { "pin_a": "B7", "pin_b": "A4", "resolution": 2} ] } } \ No newline at end of file
A keyboards/custommk/evo70_r2/keymaps/default/keymap.c => keyboards/custommk/evo70_r2/keymaps/default/keymap.c +33 -0
@@ 0,0 1,33 @@ /* Copyright 2023 David Hoelscher (@customMK) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( KC_ESC, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, KC_F1, KC_F2, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, KC_F3, KC_F4, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_F5, KC_F6, KC_LCTL, KC_LWIN, KC_LALT, KC_SPACE, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), }; #if defined(ENCODER_MAP_ENABLE) const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), }; #endif \ No newline at end of file
A keyboards/custommk/evo70_r2/keymaps/via/config.h => keyboards/custommk/evo70_r2/keymaps/via/config.h +13 -0
@@ 0,0 1,13 @@ // Copyright 2023 David Hoelscher (@customMK) // SPDX-License-Identifier: GPL-2.0-or-later #pragma once // With 8k FRAM, max out dynamic keymap layers and macros // 5x16 matrix (160 bytes) and one encoder (4 bytes) consume 164 bytes per layer // 32 layers consumes 5248 bytes #define DYNAMIC_KEYMAP_LAYER_COUNT 32 // Most of the remaining space can be used for macros // QMK Macro keycode range allows up to 128 macros #define DYNAMIC_KEYMAP_MACRO_COUNT 128
A keyboards/custommk/evo70_r2/keymaps/via/keymap.c => keyboards/custommk/evo70_r2/keymaps/via/keymap.c +33 -0
@@ 0,0 1,33 @@ /* Copyright 2023 David Hoelscher (@customMK) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( KC_ESC, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, KC_F1, KC_F2, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, KC_F3, KC_F4, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_F5, KC_F6, KC_LCTL, KC_LWIN, KC_LALT, KC_SPACE, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), }; #if defined(ENCODER_MAP_ENABLE) const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) } }; #endif \ No newline at end of file
A keyboards/custommk/evo70_r2/keymaps/via/rules.mk => keyboards/custommk/evo70_r2/keymaps/via/rules.mk +2 -0
A keyboards/custommk/evo70_r2/matrix.c => keyboards/custommk/evo70_r2/matrix.c +117 -0
@@ 0,0 1,117 @@ // Copyright 2023 David Hoelscher (@customMK) // SPDX-License-Identifier: GPL-2.0-or-later #include "quantum.h" // Pin definitions static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; void matrix_wait_for_pin(pin_t pin, uint8_t target_state) { rtcnt_t start = chSysGetRealtimeCounterX(); rtcnt_t end = start + 5000; while (chSysIsCounterWithinX(chSysGetRealtimeCounterX(), start, end)) { if (readPin(pin) == target_state) { break; } } } void matrix_wait_for_port(stm32_gpio_t *port, uint32_t target_bitmask) { rtcnt_t start = chSysGetRealtimeCounterX(); rtcnt_t end = start + 5000; while (chSysIsCounterWithinX(chSysGetRealtimeCounterX(), start, end)) { if ((palReadPort(port) & target_bitmask) == target_bitmask) { break; } } } void shift_pulse_clock(void) { writePinHigh(COL_SHIFT_CLK_PIN); matrix_wait_for_pin(COL_SHIFT_CLK_PIN, 1); writePinLow(COL_SHIFT_CLK_PIN); } void matrix_init_custom(void) { //set all row pins as input with pullups for (int i = 0; i < MATRIX_ROWS; ++i) { writePinHigh(row_pins[i]); setPinInputHigh(row_pins[i]); } //set all column pins high in ROW2COL matrix setPinOutput(COL_SHIFT_IN_PIN); setPinOutput(COL_SHIFT_CLK_PIN); writePinHigh(COL_SHIFT_IN_PIN); matrix_wait_for_pin(COL_SHIFT_IN_PIN, 1); for (int i = 0; i < MATRIX_COLS; ++i) { shift_pulse_clock(); } } bool matrix_scan_custom(matrix_row_t current_matrix[]) { static matrix_row_t temp_matrix[MATRIX_ROWS] = {0}; writePinLow(COL_SHIFT_IN_PIN); matrix_wait_for_pin(COL_SHIFT_IN_PIN, 0); // Setup the output column pin shift_pulse_clock(); writePinHigh(COL_SHIFT_IN_PIN); for (int current_col = 0; current_col < MATRIX_COLS; ++current_col) { // Read the column ports uint32_t gpio_a = palReadPort(GPIOA); uint32_t gpio_b = palReadPort(GPIOB); // row 0, pin A8 int current_row = 0; if ((gpio_a & (1 << 8)) >> 8) { temp_matrix[current_row] &= ~(1ul << current_col); } else { temp_matrix[current_row] |= (1ul << current_col); } // row 1, pin A1 current_row = 1; if ((gpio_a & (1 << 1)) >> 1) { temp_matrix[current_row] &= ~(1ul << current_col); } else { temp_matrix[current_row] |= (1ul << current_col); } // row 2, pin A2 current_row = 2; if ((gpio_a & (1 << 2)) >> 2) { temp_matrix[current_row] &= ~(1ul << current_col); } else { temp_matrix[current_row] |= (1ul << current_col); } // row 3, pin B3 current_row = 3; if ((gpio_b & (1 << 1)) >> 1) { temp_matrix[current_row] &= ~(1ul << current_col); } else { temp_matrix[current_row] |= (1ul << current_col); } // row 4, pin A7 current_row = 4; if ((gpio_a & (1 << 7)) >> 7) { temp_matrix[current_row] &= ~(1ul << current_col); } else { temp_matrix[current_row] |= (1ul << current_col); } // Setup the output column pin shift_pulse_clock(); } // Check if matrix has changed, return the last-read data bool changed = memcmp(current_matrix, temp_matrix, sizeof(temp_matrix)) != 0; if (changed) { memcpy(current_matrix, temp_matrix, sizeof(temp_matrix)); } shift_pulse_clock(); return changed; }
A keyboards/custommk/evo70_r2/mcuconf.h => keyboards/custommk/evo70_r2/mcuconf.h +58 -0
@@ 0,0 1,58 @@ /* Copyright 2023 David Hoelscher (@customMK) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #include_next <mcuconf.h> #undef STM32_LSE_ENABLED #define STM32_LSE_ENABLED TRUE #undef STM32_RTCSEL #define STM32_RTCSEL STM32_RTCSEL_LSE // Used for underglow #undef STM32_PWM_USE_TIM1 //timer 1 channel 3 #define STM32_PWM_USE_TIM1 TRUE // Used for backlight //#undef STM32_PWM_USE_TIM2 //timer 2 channel ? //#define STM32_PWM_USE_TIM2 TRUE // Used for backlight #undef STM32_PWM_USE_TIM3 //timer 3 channel 1 #define STM32_PWM_USE_TIM3 TRUE // Used for backlight //#undef STM32_GPT_USE_TIM3 //timer 3 channel 1 //#define STM32_GPT_USE_TIM3 TRUE // Used for backlight #undef STM32_PWM_USE_TIM4 //timer 4 channel ? #define STM32_PWM_USE_TIM4 TRUE // Used for backlight #undef STM32_GPT_USE_TIM5 //timer 5 channel ? #define STM32_GPT_USE_TIM5 TRUE // Used for FRAM and flash in example code #undef STM32_SPI_USE_SPI1 #define STM32_SPI_USE_SPI1 TRUE // Used for OLED #undef STM32_I2C_USE_I2C1 #define STM32_I2C_USE_I2C1 TRUE
A keyboards/custommk/evo70_r2/readme.md => keyboards/custommk/evo70_r2/readme.md +21 -0
@@ 0,0 1,21 @@ # EVO70 R2 EVO70 R2 is a 70% keyboard (65% w/left side function cluster) designed and produced by customMK.  * Keyboard Maintainer: [customMK](https://github.com/customMK) * Hardware Supported: EVO70 R2 * Hardware Availability: [customMK](https://shop.custommk.com/collections/evo70/products/evo70) Make example for this keyboard (after setting up your build environment): make custommk/evo70_r2:default Flashing example for this keyboard: make custommk/evo70_r2:default:flash To enter the bootloader, run the flashing command above, and then either plug in the USB connection while holding the top-left key, or alternatively, plug in the USB connection and then press the reset button on the PCB located under the space bar. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
A keyboards/custommk/evo70_r2/rules.mk => keyboards/custommk/evo70_r2/rules.mk +11 -0