M keyboards/jm60/config.h => keyboards/jm60/config.h +92 -22
@@ 15,39 15,105 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6464
-#define DEVICE_VER 0x0001
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6464
+#define DEVICE_VER 0x0001
#define MANUFACTURER JMWS
-#define PRODUCT JM60 RGB Keyboard(QMK)
-#define DESCRIPTION QMK keyboard firmware for JM60 RGB Keyboard
+#define PRODUCT JM60
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
-/* number of backlight levels */
-//#define BACKLIGHT_LEVELS 1
-
-//#define LED_BRIGHTNESS_LO 100
-//#define LED_BRIGHTNESS_HI 255
-
-/* define if matrix has ghost */
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B11, B10, B2, B1, B0 }
+#define MATRIX_COL_PINS { A15, C10, C11, C12, D2, B3, B4, B5, B6, B7, B8, B9, A2, A3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+//#define RGB_DI_PIN E2
+//#ifdef RGB_DI_PIN
+//# define RGBLED_NUM 16
+//# define RGBLIGHT_HUE_STEP 8
+//# define RGBLIGHT_SAT_STEP 8
+//# define RGBLIGHT_VAL_STEP 8
+//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//# define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//# define RGBLIGHT_EFFECT_BREATHING
+//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//# define RGBLIGHT_EFFECT_SNAKE
+//# define RGBLIGHT_EFFECT_KNIGHT
+//# define RGBLIGHT_EFFECT_CHRISTMAS
+//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//# define RGBLIGHT_EFFECT_RGB_TEST
+//# define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+//#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-
+#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ 63,7 129,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-#endif
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
A keyboards/jm60/info.json => keyboards/jm60/info.json +78 -0
@@ 0,0 1,78 @@
+{
+ "keyboard_name": "JM60",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 15,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_60_ansi": {
+ "layout": [
+ {"x": 0, "y": 0},
+ {"x": 1, "y": 0},
+ {"x": 2, "y": 0},
+ {"x": 3, "y": 0},
+ {"x": 4, "y": 0},
+ {"x": 5, "y": 0},
+ {"x": 6, "y": 0},
+ {"x": 7, "y": 0},
+ {"x": 8, "y": 0},
+ {"x": 9, "y": 0},
+ {"x": 10, "y": 0},
+ {"x": 11, "y": 0},
+ {"x": 12, "y": 0},
+ {"x": 13, "y": 0, "w": 2},
+
+ {"x": 0, "y": 1, "w": 1.5},
+ {"x": 1.5, "y": 1},
+ {"x": 2.5, "y": 1},
+ {"x": 3.5, "y": 1},
+ {"x": 4.5, "y": 1},
+ {"x": 5.5, "y": 1},
+ {"x": 6.5, "y": 1},
+ {"x": 7.5, "y": 1},
+ {"x": 8.5, "y": 1},
+ {"x": 9.5, "y": 1},
+ {"x": 10.5, "y": 1},
+ {"x": 11.5, "y": 1},
+ {"x": 12.5, "y": 1},
+ {"x": 13.5, "y": 1, "w": 1.5},
+
+ {"x": 0, "y": 2, "w": 1.75},
+ {"x": 1.75, "y": 2},
+ {"x": 2.75, "y": 2},
+ {"x": 3.75, "y": 2},
+ {"x": 4.75, "y": 2},
+ {"x": 5.75, "y": 2},
+ {"x": 6.75, "y": 2},
+ {"x": 7.75, "y": 2},
+ {"x": 8.75, "y": 2},
+ {"x": 9.75, "y": 2},
+ {"x": 10.75, "y": 2},
+ {"x": 11.75, "y": 2},
+ {"x": 12.75, "y": 2, "w": 2.25},
+
+ {"x": 0, "y": 3, "w": 2.25},
+ {"x": 2.25, "y": 3},
+ {"x": 3.25, "y": 3},
+ {"x": 4.25, "y": 3},
+ {"x": 5.25, "y": 3},
+ {"x": 6.25, "y": 3},
+ {"x": 7.25, "y": 3},
+ {"x": 8.25, "y": 3},
+ {"x": 9.25, "y": 3},
+ {"x": 10.25, "y": 3},
+ {"x": 11.25, "y": 3},
+ {"x": 12.25, "y": 3, "w": 2.75},
+
+ {"x": 0, "y": 4, "w": 1.25},
+ {"x": 1.25, "y": 4, "w": 1.25},
+ {"x": 2.5, "y": 4, "w": 1.25},
+ {"x": 3.75, "y": 4, "w": 6.25},
+ {"x": 10, "y": 4, "w": 1.25},
+ {"x": 11.25, "y": 4, "w": 1.25},
+ {"x": 12.5, "y": 4, "w": 1.25},
+ {"x": 13.75, "y": 4, "w": 1.25}
+ ]
+ }
+ }
+}
M keyboards/jm60/jm60.c => keyboards/jm60/jm60.c +2 -1
@@ 14,4 14,5 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include QMK_KEYBOARD_H
+
+#include "jm60.h"
M keyboards/jm60/jm60.h => keyboards/jm60/jm60.h +14 -31
@@ 14,40 14,23 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef JM60_H
-#define JM60_H
+
+#pragma once
#include "quantum.h"
-// readability
#define XXX KC_NO
-/* Satan GH60 ANSI layout
- * ,-----------------------------------------------------------.
- * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d |
- * |-----------------------------------------------------------|
- * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
- * |-----------------------------------------------------------|
- * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2c| 2d |
- * |-----------------------------------------------------------|
- * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3b| 3d |
- * |-----------------------------------------------------------|
- * | 40 | 41 | 42 | 46 | 4a | 4b | 4c | 4d |
- * `-----------------------------------------------------------'
- */
-#define KEYMAP_ANSI( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c, k2d, \
- k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3b, k3d, \
- k40, k41, k42, k46, k4a, k4b, k4c, k4d \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c, k2d}, \
- {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, XXX, k3b, XXX, k3d}, \
- {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \
+#define LAYOUT_60_ansi( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2C, k2D, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3B, k3D, \
+ k40, k41, k42, k46, k4A, k4B, k4C, k4D \
+) { \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, XXX, k2C, k2D }, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, XXX, k3B, XXX, k3D }, \
+ { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, k4C, k4D } \
}
-
-#endif
M keyboards/jm60/keymaps/default/keymap.c => keyboards/jm60/keymaps/default/keymap.c +33 -38
@@ 1,44 1,39 @@
#include QMK_KEYBOARD_H
-
-// Used for SHIFT_ESC
-#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _BL 0
-#define _FL 1
+enum layer_names {
+ _BL,
+ _FL
+};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Keymap _BL: (Base Layer) Default Layer
- * ,-----------------------------------------------------------.
- * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |
- * |-----------------------------------------------------------|
- * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl |
- * `-----------------------------------------------------------'
- */
-[_BL] = KEYMAP_ANSI(
- KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, \
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \
- KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, MO(_FL),KC_RCTL),
+ /* Keymap _BL: (Base Layer) Default Layer
+ * ,-----------------------------------------------------------.
+ * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
+ * |-----------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |
+ * |-----------------------------------------------------------|
+ * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |
+ * |-----------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
+ * |-----------------------------------------------------------|
+ * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl |
+ * `-----------------------------------------------------------'
+ */
+ [_BL] = LAYOUT_60_ansi(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL
+ ),
- /* Keymap _FL: Function Layer
- */
-[_FL] = KEYMAP_ANSI(
- KC_GRV, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, BL_INC,BL_TOGG, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
- _______,_______,_______, _______, _______,_______,_______,_______),
+ /* Keymap _FL: Function Layer
+ */
+ [_FL] = LAYOUT_60_ansi(
+ KC_GRV, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_DEC, BL_INC, BL_TOGG,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ )
};
-
M keyboards/jm60/keymaps/poker3/keymap.c => keyboards/jm60/keymaps/poker3/keymap.c +18 -25
@@ 1,31 1,24 @@
#include QMK_KEYBOARD_H
-// Used for SHIFT_ESC
-#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _BL 0
-#define _FL 1
+enum layer_names {
+ _BL,
+ _FL
+};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Keymap _BL: (Base Layer) Default Layer
- */
-[_BL] = KEYMAP_ANSI(
- KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, \
- MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \
- KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, MO(_FL),KC_RCTL),
+ [_BL] = LAYOUT_60_ansi(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL
+ ),
- /* Keymap _FL: Function Layer
- */
-[_FL] = KEYMAP_ANSI(
- KC_GRV, KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DEL, \
- _______,KC_MPRV,KC_MPLY,KC_MNXT,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR, KC_SLCK, KC_PAUS,_______, \
- KC_CAPS,_______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,KC_DEL,_______, \
- _______,KC_APP,_______,_______,_______,_______,KC_END,_______,_______,_______,_______,_______, \
- _______,_______,_______, _______, _______,_______,_______,_______),
+ [_FL] = LAYOUT_60_ansi(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+ _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, _______,
+ KC_CAPS, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_DEL, _______,
+ _______, KC_APP, _______, _______, _______, _______, KC_END, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ )
};
D keyboards/jm60/led.c => keyboards/jm60/led.c +0 -24
@@ 1,24 0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <hal.h>
-
-#include "led.h"
-
-
-void led_set(uint8_t usb_led) {
-}
D keyboards/jm60/matrix.c => keyboards/jm60/matrix.c +0 -128
@@ 1,128 0,0 @@
-#include <stdint.h>
-#include <stdbool.h>
-#include <string.h>
-#include <hal.h>
-#include "timer.h"
-#include "wait.h"
-#include "print.h"
-#include "matrix.h"
-
-
-/*
- * JM60
- * Column pins are input with internal pull-down. Row pins are output and strobe with high.
- * Key is high or 1 when it turns on.
- *
- * col: { PTA15, PTC10, PTC11, PTC12, PTD2, PTB3, PTB4, PTB5, PTB6, PTB7, PTB8, PTB9, PTA2, PTA3 }
- * row: { PTB11, PTB10, PTB2, PTB1, PTB0}
- */
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-static bool debouncing = false;
-static uint16_t debouncing_time = 0;
-
-
-void matrix_init(void)
-{
-//debug_matrix = true;
- /* Column(sense) */
- palSetPadMode(GPIOA, 15, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOC, 10, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOC, 11, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOC, 12, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOD, 2, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOB, 3, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOB, 4, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOB, 5, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOB, 6, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOB, 7, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOB, 8, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOB, 9, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOA, 2, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_PULLDOWN);
-
- /* Row(strobe) */
- palSetPadMode(GPIOB, 11, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL);
-
- memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
- memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t));
-}
-
-uint8_t matrix_scan(void)
-{
- for (int row = 0; row < MATRIX_ROWS; row++) {
- matrix_row_t data = 0;
-
- // strobe row
- switch (row) {
- case 0: palSetPad(GPIOB, 11); break;
- case 1: palSetPad(GPIOB, 10); break;
- case 2: palSetPad(GPIOB, 2); break;
- case 3: palSetPad(GPIOB, 1); break;
- case 4: palSetPad(GPIOB, 0); break;
- }
-
- wait_us(20); // need wait to settle pin state
-
- // read col data: { PTA15, PTC10, PTC11, PTC12, PTD2, PTB3, PTB4, PTB5, PTB6, PTB7, PTB8, PTB9, PTA2, PTA3 }
- data = ((palReadPort(GPIOA) & 0x8000UL) >> 15) | // 0
- ((palReadPort(GPIOC) & 0x1C00UL) >> 9) | // 1, 2, 3
- ((palReadPort(GPIOD) & 0x0004UL) << 2) | // 4
- ((palReadPort(GPIOB) & 0x03F8UL) << 2) | // 5, 6, 7, 8, 9, 10, 11
- ((palReadPort(GPIOA) & 0x000CUL) << 10); // 12, 13
-
- // un-strobe row
- switch (row) {
- case 0: palClearPad(GPIOB, 11); break;
- case 1: palClearPad(GPIOB, 10); break;
- case 2: palClearPad(GPIOB, 2); break;
- case 3: palClearPad(GPIOB, 1); break;
- case 4: palClearPad(GPIOB, 0); break;
- }
-
- if (matrix_debouncing[row] != data) {
- matrix_debouncing[row] = data;
- debouncing = true;
- debouncing_time = timer_read();
- }
- }
-
- if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
- for (int row = 0; row < MATRIX_ROWS; row++) {
- matrix[row] = matrix_debouncing[row];
- }
- debouncing = false;
- }
- return 1;
-}
-
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & (1<<col));
-}
-
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- xprintf("\nr/c 01234567\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- xprintf("%X0: ", row);
- matrix_row_t data = matrix_get_row(row);
- for (int col = 0; col < MATRIX_COLS; col++) {
- if (data & (1<<col))
- xprintf("1");
- else
- xprintf("0");
- }
- xprintf("\n");
- }
-}
M keyboards/jm60/readme.md => keyboards/jm60/readme.md +9 -15
@@ 1,27 1,21 @@
-JM60
-========
+# JM60
A compact 60% keyboard with full RGB led support.
-Keyboard Maintainer: QMK Community
-Hardware Supported: JM60
-Hardware Availability: https://kbdfans.myshopify.com/ (is no longer sold)
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: JM60
+* Hardware Availability: https://kbdfans.myshopify.com/ (is no longer sold)
Make example for this keyboard (after setting up your build environment):
- make jm60:default:bin
+ make jm60:default
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Flashing Instructions
-1) from the `qmk_firmware` directory run:
-```
-$ make jm60:default:bin
-```
+1) rename 'jm60_default.bin' to 'jm60_default.firmware'
-2) rename 'jm60_default.bin' to 'jm60_default.firmware'
+2) Press 'R' and reconnect the keyboard.
-3) Press 'R' and reconnect the keyboard.
-
-4) Start the original Configuration Tool and flash 'jm60_default.bin'
+3) Start the original Configuration Tool and flash 'jm60_default.bin'
M keyboards/jm60/rules.mk => keyboards/jm60/rules.mk +15 -14
@@ 5,22 5,23 @@ MCU_LDSCRIPT = jm60_bootloader
BOARD = JM60_BOARD
# Build Options
-# comment out to disable the options.
+# change yes to no to disable
#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes # USB Nkey Rollover
-CUSTOM_MATRIX = yes # Custom matrix file
-BACKLIGHT_ENABLE = no
-VISUALIZER_ENABLE = no
+BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
-# project specific files
-SRC = matrix.c \
- led.c
+LAYOUTS = 60_ansi