M keyboards/qwertyydox/config.h => keyboards/qwertyydox/config.h +185 -14
@@ 15,8 15,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef REV1_CONFIG_H
-#define REV1_CONFIG_H
+#pragma once
#include "config_common.h"
@@ 33,6 32,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 8
#define MATRIX_COLS 7
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
// wiring of each half
#define MATRIX_ROW_PINS { B6, B2, B3, B1 }
#define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 }
@@ 40,30 49,139 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0
-/* number of backlight levels */
-// #define BACKLIGHT_LEVELS 3
+// #define BACKLIGHT_PIN E6
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 5
-/* Set 0 if debouncing isn't needed */
+#define RGB_DI_PIN D6
+#ifdef RGB_DI_PIN
+ #define RGBLED_NUM 12
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+ #define RGBLIGHT_VAL_STEP 8
+ #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+ #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+ /*== all animations enable ==*/
+ #define RGBLIGHT_ANIMATIONS
+ // /*== or choose animations ==*/
+ // #define RGBLIGHT_EFFECT_BREATHING
+ // #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+ // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+ // #define RGBLIGHT_EFFECT_SNAKE
+ // #define RGBLIGHT_EFFECT_KNIGHT
+ // #define RGBLIGHT_EFFECT_CHRISTMAS
+ // #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+ // #define RGBLIGHT_EFFECT_RGB_TEST
+ // #define RGBLIGHT_EFFECT_ALTERNATING
+ // /*== customize breathing effect ==*/
+ // /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+ // #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+ // /*==== use exp() and sin() ====*/
+ // #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
-/* serial.c configuration for split keyboard */
-#define SOFT_SERIAL_PIN D0
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-#define BACKLIGHT_PIN E6
-#define BACKLIGHT_LEVELS 5
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D6
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
-#define RGBLED_NUM 12 // Number of LEDs
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+#define MOUSEKEY_DELAY 150
+#define MOUSEKEY_INTERVAL 20
+#define MOUSEKEY_MAX_SPEED 10
+#define MOUSEKEY_TIME_TO_MAX 10
+#define MOUSEKEY_WHEEL_MAX_SPEED 8
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 40
/*
* Feature disable options
@@ 83,4 201,57 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/qwertyydox/info.json => keyboards/qwertyydox/info.json +56 -2
@@ 5,12 5,66 @@
"url": "",
"maintainer": "qmk",
"processor": "atmega32u4",
- "width": 16,
+ "width": 16.25,
"height": 5,
"layouts": {
"LAYOUT": {
"key_count": 53,
- "layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.25}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.5}, {"label":"R00", "x":9, "y":0.5}, {"label":"R01", "x":10, "y":0.25}, {"label":"R02", "x":11, "y":0.125}, {"label":"R03", "x":12, "y":0}, {"label":"R04", "x":13, "y":0.125}, {"label":"R05", "x":14, "y":0.25}, {"label":"R06", "x":15, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.25}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.5}, {"label":"R10", "x":9, "y":1.5}, {"label":"R11", "x":10, "y":1.25}, {"label":"R12", "x":11, "y":1.125}, {"label":"R13", "x":12, "y":1}, {"label":"R14", "x":13, "y":1.125}, {"label":"R15", "x":14, "y":1.25}, {"label":"R16", "x":15, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.25}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6.5, "y":3}, {"label":"R20", "x":8.5, "y":3}, {"label":"R21", "x":10, "y":2.25}, {"label":"R22", "x":11, "y":2.125}, {"label":"R23", "x":12, "y":2}, {"label":"R24", "x":13, "y":2.125}, {"label":"R25", "x":14, "y":2.25}, {"label":"R26", "x":15, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.25}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":5.5, "y":4}, {"label":"L35", "x":6.5, "y":4}, {"label":"R30", "x":8.5, "y":4}, {"label":"R31", "x":9.5, "y":4}, {"label":"R32", "x":12, "y":3}, {"label":"R33", "x":13, "y":3.125}, {"label":"R34", "x":14, "y":3.25}, {"label":"R35", "x":15, "y":3.375}]
+ "layout": [
+ {"label":"Tab", "x":0, "y":0},
+ {"label":"Q", "x":1, "y":0},
+ {"label":"W", "x":2, "y":0},
+ {"label":"E", "x":3, "y":0},
+ {"label":"R", "x":4, "y":0},
+ {"label":"T", "x":5, "y":0},
+ {"label":"Y", "x":6, "y":0},
+ {"label":"Y", "x":9, "y":0},
+ {"label":"U", "x":10, "y":0},
+ {"label":"I", "x":11, "y":0},
+ {"label":"O", "x":12, "y":0},
+ {"label":"P", "x":13, "y":0},
+ {"label":"{", "x":14, "y":0},
+ {"label":"}", "x":15, "y":0},
+ {"label":"Caps Lock", "x":0.25, "y":1},
+ {"label":"A", "x":1.25, "y":1},
+ {"label":"S", "x":2.25, "y":1},
+ {"label":"D", "x":3.25, "y":1},
+ {"label":"F", "x":4.25, "y":1},
+ {"label":"G", "x":5.25, "y":1},
+ {"label":"H", "x":9.25, "y":1},
+ {"label":"J", "x":10.25, "y":1},
+ {"label":"K", "x":11.25, "y":1},
+ {"label":"L", "x":12.25, "y":1},
+ {"label":":", "x":13.25, "y":1},
+ {"label":"\"", "x":14.25, "y":1},
+ {"label":"|", "x":15.25, "y":1},
+ {"label":"Shift", "x":0.75, "y":2},
+ {"label":"Z", "x":1.75, "y":2},
+ {"label":"X", "x":2.75, "y":2},
+ {"label":"C", "x":3.75, "y":2},
+ {"label":"V", "x":4.75, "y":2},
+ {"label":"B", "x":5.75, "y":2},
+ {"label":"N", "x":9.75, "y":2},
+ {"label":"M", "x":10.75, "y":2},
+ {"label":"<", "x":11.75, "y":2},
+ {"label":">", "x":12.75, "y":2},
+ {"label":"?", "x":13.75, "y":2},
+ {"label":"Shift", "x":14.75, "y":2},
+ {"label":"Ctrl", "x":0.75, "y":3},
+ {"label":"GUI", "x":1.75, "y":3},
+ {"label":"Alt", "x":2.75, "y":3},
+ {"label":"\"-QWERTY\"", "x":3.75, "y":3},
+ {"label":"Enter", "x":4.75, "y":3.33},
+ {"label":"Delete", "x":5.75, "y":3.67},
+ {"label":"TO(_NUM)", "x":6.75, "y":4},
+ {"label":"TO(_NAV)", "x":8.75, "y":4},
+ {"label":"Space", "x":9.75, "y":3.67},
+ {"label":"Back Space", "x":10.75, "y":3.33},
+ {"label":"Left", "x":11.75, "y":3},
+ {"label":"Alt", "x":12.75, "y":3},
+ {"label":"GUI", "x":13.75, "y":3},
+ {"label":"Ctrl", "x":14.75, "y":3}
+ ]
}
}
}
M keyboards/qwertyydox/keymaps/default/config.h => keyboards/qwertyydox/keymaps/default/config.h +0 -14
@@ 27,17 27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define MASTER_LEFT
#define MASTER_RIGHT
// #define EE_HANDS
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 12
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-
-#define MOUSEKEY_DELAY 150
-#define MOUSEKEY_INTERVAL 20
-#define MOUSEKEY_MAX_SPEED 10
-#define MOUSEKEY_TIME_TO_MAX 10
-#define MOUSEKEY_WHEEL_MAX_SPEED 8
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 40>
\ No newline at end of file
M keyboards/qwertyydox/keymaps/default/keymap.c => keyboards/qwertyydox/keymaps/default/keymap.c +16 -24
@@ 2,9 2,12 @@
extern keymap_config_t keymap_config;
-#define _QWERTY 0
-#define _NUM 1
-#define _NAV 2
+enum layer_names {
+ _QWERTY,
+ _NUM,
+ _NAV
+};
+
enum custom_keycodes {
qwerty = SAFE_RANGE,
nav,
@@ 12,17 15,6 @@ enum custom_keycodes {
EQL
};
-// #define KC_ KC_TRNS
-#define __ KC_NO
-#define NAV TO(2)
-#define NUM TO(1)
-#define ALPHA TO(0)
-#define NPLUS KC_KP_PLUS
-#define NMINUS KC_KP_MINUS
-#define NSTAR KC_KP_ASTERISK
-#define NSLASH KC_KP_SLASH
-
-
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
@@ 31,33 23,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
- KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, __, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC,
+ KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
- KC_LCTL, KC_LGUI, KC_LALT, qwerty, KC_ENT, KC_DEL, NUM, NAV, KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL
+ KC_LCTL, KC_LGUI, KC_LALT, qwerty, KC_ENT, KC_DEL, TO(1), TO(2), KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL
//`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------'
),
[_NUM] = LAYOUT(
//,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------.
- KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NO,
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NO,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
- KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO,
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
- KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, __, KC_NO, KC_PPLS, KC_PMNS, EQL, KC_PAST, KC_PSLS,
+ KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PPLS, KC_PMNS, EQL, KC_PAST, KC_PSLS,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
- KC_LCTL, KC_ESC, KC_NO, num, KC_ENT, KC_LSFT, NAV, ALPHA, KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL
+ KC_LCTL, KC_ESC, KC_NO, num, KC_ENT, KC_LSFT, TO(2), TO(0), KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL
//`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------'
),
[_NAV] = LAYOUT(
//,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------.
- KC_ESC, KC_NO, KC_ACL0, KC_ACL1, KC_ACL2, KC_WH_L, KC_WH_R, KC_ESC, KC_NO, KC_UP, NSLASH, NSTAR, NMINUS, NPLUS,
+ KC_ESC, KC_NO, KC_ACL0, KC_ACL1, KC_ACL2, KC_WH_L, KC_WH_R, KC_ESC, KC_NO, KC_UP, KC_PSLS, KC_PAST, KC_PMNS, KC_PPLS,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
- KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_WH_U, KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO,
+ KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_WH_U, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
- KC_INS, KC_HOME, KC_PGUP, KC_BTN1, KC_BTN2, KC_WH_D, __, KC_MS_L, KC_MS_U, KC_MS_D, KC_MS_R, KC_NO, KC_NO,
+ KC_INS, KC_HOME, KC_PGUP, KC_BTN1, KC_BTN2, KC_WH_D, KC_MS_L, KC_MS_U, KC_MS_D, KC_MS_R, KC_NO, KC_NO,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
- KC_DEL, KC_END, KC_PGDN, nav, KC_LCTL, KC_SPC, ALPHA, NUM, KC_LSFT, KC_BSPC, KC_NO, KC_NO, KC_NO, RESET
+ KC_DEL, KC_END, KC_PGDN, nav, KC_LCTL, KC_SPC, TO(0), TO(1), KC_LSFT, KC_BSPC, KC_NO, KC_NO, KC_NO, RESET
//`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------'
)
};
M keyboards/qwertyydox/qwertyydox.h => keyboards/qwertyydox/qwertyydox.h +3 -20
@@ 1,24 1,7 @@
-#ifndef QWERTYYDOX_H
-#define QWERTYYDOX_H
+#pragma once
+
+#include "quantum.h"
#ifdef KEYBOARD_qwertyydox_rev1
#include "rev1.h"
#endif
-
-#include "quantum.h"
-
-// Used to create a keymap using only KC_ prefixed keys
-#define LAYOUT_kc( \
- L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
- L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
- L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
- L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
- ) \
- LAYOUT( \
- KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
- KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
- KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
- KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
- )
-
-#endif>
\ No newline at end of file
M keyboards/qwertyydox/rev1/config.h => keyboards/qwertyydox/rev1/config.h +1 -69
@@ 15,72 15,4 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef REV1_CONFIG_H
-#define REV1_CONFIG_H
-
-#include QMK_KEYBOARD_CONFIG_H
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xCEEB
-#define PRODUCT_ID 0x1256
-#define DEVICE_VER 0x0100
-#define MANUFACTURER AYDENandDAD
-#define PRODUCT QWERTYdox Keyboard
-#define DESCRIPTION Split 40 percent keyboard
-
-/* key matrix size */
-// Rows are doubled-up
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 7
-
-// wiring of each half
-#define MATRIX_ROW_PINS { B6, B2, B3, B1 }
-#define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-// #define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* serial.c configuration for split keyboard */
-#define SOFT_SERIAL_PIN D0
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define BACKLIGHT_PIN E6
-#define BACKLIGHT_LEVELS 5
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D6
-
-#define RGBLED_NUM 12 // Number of LEDs
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
+#pragma once
M keyboards/qwertyydox/rev1/rev1.h => keyboards/qwertyydox/rev1/rev1.h +3 -12
@@ 1,12 1,7 @@
-#ifndef REV1_H
-#define REV1_H
+#pragma once
#include "qwertyydox.h"
-//void promicro_bootloader_jmp(bool program);
-#include "quantum.h"
-
-
#ifdef USE_I2C
#include <stddef.h>
#ifdef __AVR__
@@ 15,12 10,10 @@
#endif
#endif
-//void promicro_bootloader_jmp(bool program);
-
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, R16, \
- L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, R26, \
+ L20, L21, L22, L23, L24, L25, R21, R22, R23, R24, R25, R26, \
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36 \
) \
{ \
@@ 30,8 23,6 @@
{ L30, L31, L32, L33, L34, L35, L36 }, \
{ R06, R05, R04, R03, R02, R01, R00 }, \
{ R16, R15, R14, R13, R12, R11, R10 }, \
- { R26, R25, R24, R23, R22, R21, R20, }, \
+ { R26, R25, R24, R23, R22, R21, KC_NO, }, \
{ R36, R35, R34, R33, R32, R31, R30 } \
}
-
-#endif
M keyboards/qwertyydox/rev1/rules.mk => keyboards/qwertyydox/rev1/rules.mk +0 -1
@@ 1,1 0,0 @@
-BACKLIGHT_ENABLE = no
M keyboards/qwertyydox/rules.mk => keyboards/qwertyydox/rules.mk +1 -3
@@ 52,14 52,12 @@ EXTRAKEY_ENABLE = no # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-SUBPROJECT_rev1 = yes
-USE_I2C = yes # I2C is used between the sides
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend