15 files changed, 36 insertions(+), 230 deletions(-)

M keyboards/clueboard/17/17.c
M keyboards/clueboard/2x1800/2018/2018.c
M keyboards/clueboard/2x1800/2018/config.h
M keyboards/clueboard/60/config.h
M keyboards/clueboard/60/led.c
M keyboards/clueboard/66/rev1/config.h
M keyboards/clueboard/66/rev1/rev1.c
M keyboards/clueboard/66/rev2/config.h
M keyboards/clueboard/66/rev2/rev2.c
M keyboards/clueboard/66/rev3/config.h
M keyboards/clueboard/66/rev3/rev3.c
M keyboards/clueboard/66/rev4/rev4.c
M keyboards/clueboard/66_hotswap/prototype/config.h
M keyboards/clueboard/66_hotswap/prototype/prototype.c
M keyboards/clueboard/card/card.c

@@ 2,16 2,6 @@
 
 int pwm_level;
 
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    matrix_init_user();
-};
-
-void led_set_kb(uint8_t usb_led) {
-    print("led_set\n");
-}
-
 void backlight_init_ports(void) {
     // Set C7 to output
     DDRC |= (1<<7);

@@ 14,44 14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "2018.h"
-
-void matrix_init_kb(void) {
-	// Set our LED pins as output
-	DDRB |= (1<<4);  // Numlock
-	DDRB |= (1<<5);  // Capslock
-	DDRB |= (1<<6);  // Scroll Lock
-
-	// Run the keymap level init
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // Toggle numlock as needed
-	if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-		PORTB |= (1<<4);
-	} else {
-		PORTB &= ~(1<<4);
-	}
-
-  // Toggle capslock as needed
-	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-		PORTB |= (1<<5);
-	} else {
-		PORTB &= ~(1<<5);
-	}
-
-	// Toggle scrolllock as needed
-	if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-		PORTB |= (1<<6);
-	} else {
-		PORTB &= ~(1<<6);
-	}
-}

@@ 60,6 60,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define C4_AUDIO
 #define AUDIO_CLICKY
 
+#define LED_NUM_LOCK_PIN B4
+#define LED_CAPS_LOCK_PIN B5
+#define LED_SCROLL_LOCK_PIN B6
+
 /* number of backlight levels */
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING

@@ 121,6 121,8 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
- /* Backlight configuration
+#define LED_CAPS_LOCK_PIN B7
+
+/* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 1

@@ 16,7 16,6 @@
 */
 
 #include "hal.h"
-#include "led.h"
 #include "printf.h"
 
 #ifdef BACKLIGHT_ENABLE


@@ 40,14 39,3 @@ void backlight_set(uint8_t level) {
     }
 }
 #endif
-
-void led_set_kb(uint8_t usb_led) {
-    printf("led_set_kb(%d)\n", usb_led);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        palSetPad(GPIOB, 7);
-    } else {
-        // Turn capslock off
-        palClearPad(GPIOB, 7);
-    }
-}

@@ 50,6 50,8 @@
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
+#define LED_CAPS_LOCK_PIN F0
+
 /* Underlight configuration
  */
 #define RGB_DI_PIN B2

@@ 1,17 1,1 @@
 #include "rev1.h"
-
-void led_init_ports() {
-    // * Set our LED pins as output
-    DDRF |= (1<<0);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    DDRF |= (1<<0);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTF |= (1<<0);
-    } else {
-        // Turn capslock off
-        PORTF &= ~(1<<0);
-    }
-}

@@ 49,7 49,9 @@
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
- /* Backlight configuration
+#define LED_CAPS_LOCK_PIN B4
+
+/* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 1
 

@@ 1,20 1,6 @@
 #include "rev2.h"
-#include <avr/io.h>
-#include "backlight.h"
 #include "print.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-}
-
-
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
 void backlight_init_ports(void) {
     print("init_backlight_pin()\n");
     // Set our LED pins as output


@@ 41,19 27,3 @@ void backlight_set(uint8_t level) {
         PORTD &= ~(1<<4); // Arrows
     }
 }
-
-void led_init_ports() {
-    // * Set our LED pins as output
-    DDRB |= (1<<4);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    DDRB |= (1<<4);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTB |= (1<<4);
-    } else {
-        // Turn capslock off
-        PORTB &= ~(1<<4);
-    }
-}

@@ 49,7 49,9 @@
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
- /* Backlight configuration
+#define LED_CAPS_LOCK_PIN B4
+
+/* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 1
 

@@ 1,20 1,6 @@
 #include "rev3.h"
-#include <avr/io.h>
-#include "backlight.h"
 #include "print.h"
 
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    matrix_init_user();
-    led_init_ports();
-}
-
-
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
 void backlight_init_ports(void) {
     print("init_backlight_pin()\n");
     // Set our LED pins as output


@@ 41,19 27,3 @@ void backlight_set(uint8_t level) {
         PORTD &= ~(1<<4); // Arrows
     }
 }
-
-void led_init_ports() {
-    // * Set our LED pins as output
-    DDRB |= (1<<4);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    DDRB |= (1<<4);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTB |= (1<<4);
-    } else {
-        // Turn capslock off
-        PORTB &= ~(1<<4);
-    }
-}

@@ 1,43 1,30 @@
 #include "rev4.h"
-//#include "backlight.h"
 
 void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    matrix_init_user();
     led_init_ports();
+
+    matrix_init_user();
 }
 
 void led_init_ports() {
     // Set our LED pins as output
-    palSetPadMode(GPIOB, 13, PAL_MODE_OUTPUT_PUSHPULL); // LED1
-    palClearPad(GPIOB, 13);
-    palSetPadMode(GPIOB, 14, PAL_MODE_OUTPUT_PUSHPULL); // LED2
-    palClearPad(GPIOB, 14);
-    palSetPadMode(GPIOA, 8, PAL_MODE_OUTPUT_PUSHPULL); // LED3
-    palClearPad(GPIOA, 8);
-    palSetPadMode(GPIOA, 0, PAL_MODE_OUTPUT_PUSHPULL); // Capslock LED
-    palClearPad(GPIOA, 0);
+    setPinOutput(B13); // LED1
+    writePinLow(B13);
+    setPinOutput(B14); // LED2
+    writePinLow(B14);
+    setPinOutput(A8); // LED3
+    writePinLow(A8);
+    setPinOutput(A0); // Capslock LED
+    writePinLow(A0);
 }
 
-void led_set_kb(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-        palSetPad(GPIOB, 13);    // LED1
-    } else {
-        palClearPad(GPIOB, 13);  // LED1
-    }
-
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        palSetPad(GPIOA, 0);     // Capslock LED
-        palSetPad(GPIOB, 14);    // LED2
-    } else {
-        palClearPad(GPIOA, 0);   // Capslock LED
-        palClearPad(GPIOB, 14);  // LED2
-    }
-
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-        palSetPad(GPIOA, 8);     // LED3
-    } else {
-        palClearPad(GPIOA, 8);   // LED3
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        writePin(B13, led_state.num_lock);
+        writePin(A0, led_state.caps_lock);
+        writePin(B14, led_state.caps_lock);
+        writePin(A8, led_state.scroll_lock);
     }
+    return res;
 }

@@ 32,6 32,8 @@
  */
 #define NO_ACTION_TAPPING
 
+#define LED_CAPS_LOCK_PIN B4
+
 /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 1

@@ 1,20 1,6 @@
 #include "prototype.h"
-#include <avr/io.h>
-#include "backlight.h"
 #include "print.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-}
-
-
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
 void backlight_init_ports(void) {
     print("init_backlight_pin()\n");
     // Set our LED pins as output


@@ 41,19 27,3 @@ void backlight_set(uint8_t level) {
         PORTD &= ~(1<<1); // Arrows
     }
 }
-
-void led_init_ports() {
-    // * Set our LED pins as output
-    DDRB |= (1<<4);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    DDRB |= (1<<4);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTB |= (1<<4);
-    } else {
-        // Turn capslock off
-        PORTB &= ~(1<<4);
-    }
-}

@@ 1,35 1,9 @@
 #include "card.h"
+
 #define BL_RED OCR1B
 #define BL_GREEN OCR1A
 #define BL_BLUE OCR1C
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 void backlight_init_ports(void)
 {
 	// Set B5, B6, and B7 as output