7 files changed, 467 insertions(+), 38 deletions(-)

M Makefile
A keymap.c
A keymap.h
M mykey.c
M print.c
M print.h
A usbkeycodes.h

@@ 46,6 46,7 @@ TARGET = mykey
 
 # List C source files here. (C dependencies are automatically generated.)
 SRC =	$(TARGET).c \
+	keymap.c \
 	usb_keyboard_debug.c \
 	print.c
 

@@ 0,0 1,27 @@
+#include "keymap.h"
+
+/*
+ * keymap for modified macway keyboard
+ */
+#define MATRIX_ROWS 9
+#define MATRIX_COLS 8
+
+const uint8_t Keymap[MATRIX_COLS][MATRIX_ROWS] = {
+    { KB_LALT,   KB_1,      KB_2,     KB_3,      KB_4,   KB_7,   KB_8,        KB_9,     KB_0 },
+    { KB_NO,     KB_ESCAPE, KB_RALT,  KB_NO,     KB_5,   KB_6,   KB_EQUAL,    KB_NO,    KB_MINUS },
+    { KB_BSPACE, KB_TAB,    KB_LGUI,  KB_RSHIFT, KB_T,   KB_Y,   KB_RBRACKET, KB_NO,    KB_LBRACKET },
+    { KB_NO,     KB_Q,      KB_W,     KB_E,      KB_R,   KB_U,   KB_I,        KB_O,     KB_P },
+    { KB_BSLASH, KB_A,      KB_S,     KB_D,      KB_F,   KB_J,   KB_K,        KB_L,     KB_SCOLON },
+    { KB_NO,     KB_LCTRL,  KB_NO,    KB_UP,     KB_G,   KB_H,   KB_NO,       KB_GRAVE, KB_QUOTE },
+    { KB_ENTER,  KB_Z,      KB_X,     KB_C,      KB_V,   KB_M,   KB_COMMA,    KB_DOWN,  KB_NO },
+    { KB_SPACE,  KB_DOWN,   KB_RIGHT, KB_LEFT,   KB_B,   KB_N,   KB_LSHIFT,   KB_NO,    KB_SLASH }
+};
+
+uint8_t get_keycode(uint8_t row, uint8_t col)
+{
+    if (row >= MATRIX_ROWS)
+        return KB_NO;
+    if (col >= MATRIX_COLS)
+        return KB_NO;
+    return Keymap[col][row];
+}

@@ 0,0 1,9 @@
+#ifndef KEYMAP_H
+#define KEYMAP_H 1
+
+#include <stdint.h>
+#include "usbkeycodes.h"
+
+uint8_t get_keycode(uint8_t row, uint8_t col);
+
+#endif

@@ 27,6 27,7 @@
 #include <util/delay.h>
 #include "usb_keyboard_debug.h"
 #include "print.h"
+#include "keymap.h"
 
 #define LED_CONFIG	(DDRD |= (1<<6))
 #define LED_ON		(PORTD &= ~(1<<6))


@@ 38,21 39,127 @@ uint8_t number_keys[10]=
 
 uint16_t idle_count=0;
 
+
+
+//
+// scan matrix
+//
+uint8_t MAX_ROW = 9;
+
+// initialize ports for matrix
+void port_setup(void)
+{
+        // Column: input w/pullup
+	DDRB = 0x00;
+	PORTB = 0xFF;
+
+        // Row: Hi-Z(unselected)
+        // PD:0,1,2,3,6,7
+        // PC:6,7
+        // PF:7
+	DDRD = 0x00;
+	PORTD = 0x00;
+	DDRC = 0x00;
+	PORTC = 0x00;
+	DDRF = 0x00;
+	PORTF = 0x00;
+}
+
+// select a row of matrix for read
+void select_row(uint8_t row)
+{
+    switch (row) {
+        case 0:
+            DDRD  = (1<<0);
+            PORTD = 0x00;
+            DDRC  = 0x00;
+            PORTC = 0x00;
+            DDRF  = 0x00;
+            PORTF = 0x00;
+            break;
+        case 1:
+            DDRD  = (1<<1);
+            PORTD = 0x00;
+            DDRC  = 0x00;
+            PORTC = 0x00;
+            DDRF  = 0x00;
+            PORTF = 0x00;
+            break;
+        case 2:
+            DDRD  = (1<<2);
+            PORTD = 0x00;
+            DDRC  = 0x00;
+            PORTC = 0x00;
+            DDRF  = 0x00;
+            PORTF = 0x00;
+            break;
+        case 3:
+            DDRD  = (1<<3);
+            PORTD = 0x00;
+            DDRC  = 0x00;
+            PORTC = 0x00;
+            DDRF  = 0x00;
+            PORTF = 0x00;
+            break;
+        case 4:
+            DDRD  = (1<<6);
+            PORTD = 0x00;
+            DDRC  = 0x00;
+            PORTC = 0x00;
+            DDRF  = 0x00;
+            PORTF = 0x00;
+            break;
+        case 5:
+            DDRD  = (1<<7);
+            PORTD = 0x00;
+            DDRC  = 0x00;
+            PORTC = 0x00;
+            DDRF  = 0x00;
+            PORTF = 0x00;
+            break;
+        case 6:
+            DDRD  = 0x00;
+            PORTD = 0x00;
+            DDRC  = (1<<6);
+            PORTC = 0x00;
+            DDRF  = 0x00;
+            PORTF = 0x00;
+            break;
+        case 7:
+            DDRD  = 0x00;
+            PORTD = 0x00;
+            DDRC  = (1<<7);
+            PORTC = 0x00;
+            DDRF  = 0x00;
+            PORTF = 0x00;
+            break;
+        case 8:
+            DDRD  = 0x00;
+            PORTD = 0x00;
+            DDRC  = 0x00;
+            PORTC = 0x00;
+            DDRF  = (1<<7);
+            PORTF = 0x00;
+            break;
+    }
+}
+
+uint8_t read_col(void)
+{
+    return PINB;
+}
+
 int main(void)
 {
-	uint8_t b, d, mask, i, reset_idle;
-	uint8_t b_prev=0xFF, d_prev=0xFF;
+	uint8_t i, reset_idle;
+	uint8_t prev_state[MAX_ROW];
+        for (int i=0; i < MAX_ROW; i++) prev_state[i] = 0xFF;
 
 	// set for 16 MHz clock
 	CPU_PRESCALE(0);
 
-	// Configure all port B and port D pins as inputs with pullup resistors.
-	// See the "Using I/O Pins" page for details.
-	// http://www.pjrc.com/teensy/pins.html
-	DDRD = 0x00;
-	DDRB = 0x00;
-	PORTB = 0xFF;
-	PORTD = 0xFF;
+        port_setup();
+
 
 	// Initialize the USB, and then wait for the host to set configuration.
 	// If the Teensy is powered without a PC connected to the USB port,


@@ 76,32 183,40 @@ int main(void)
 	print("All Port B or Port D pins are inputs with pullup resistors.\n");
 	print("Any connection to ground on Port B or D pins will result in\n");
 	print("keystrokes sent to the PC (and debug messages here).\n");
+
+        uint8_t col;
+        uint8_t code;
 	while (1) {
-		// read all port B and port D pins
-		b = PINB;
-		d = PIND;
-		// check if any pins are low, but were high previously
-		mask = 1;
-		reset_idle = 0;
-		for (i=0; i<8; i++) {
-			if (((b & mask) == 0) && (b_prev & mask) != 0) {
-				//usb_keyboard_press(KEY_B, KEY_SHIFT);
-				//usb_keyboard_press(number_keys[i], 0);
-				print("Port B, bit ");
-				phex(i);
-				print("\n");
-				reset_idle = 1;
-			}
-			if (((d & mask) == 0) && (d_prev & mask) != 0) {
-				//usb_keyboard_press(KEY_D, KEY_SHIFT);
-				//usb_keyboard_press(number_keys[i], 0);
-				print("Port D, bit ");
-				phex(i);
-				print("\n");
-				reset_idle = 1;
-			}
-			mask = mask << 1;
-		}
+            reset_idle = 0;
+
+            for (uint8_t r=0; r < MAX_ROW; r++) {
+                select_row(r);
+
+                // without this read unstable value.
+                _delay_us(30);
+
+                col = read_col();
+                if (col != prev_state[r]) {
+                    prev_state[r] = col;
+                    phex(r);
+                    print(": ");
+                    pbin(col);
+                    print("\n");
+
+                    for (int c = 0; c < 8; c++) {
+                        if (col & 1<<c) continue;
+                        code = get_keycode(r, c);
+                        phex(code);
+                        print("\n");
+                        usb_keyboard_press(code, 0);
+                    }
+
+                    reset_idle = 1;
+                }
+            }
+                
+
+
 		// if any keypresses were detected, reset the idle counter
 		if (reset_idle) {
 			// variables shared with interrupt routines must be


@@ 111,11 226,10 @@ int main(void)
 			idle_count = 0;
 			sei();
 		}
+
 		// now the current pins will be the previous, and
 		// wait a short delay so we're not highly sensitive
 		// to mechanical "bounce".
-		b_prev = b;
-		d_prev = d;
 		_delay_ms(2);
 	}
 }

@@ 58,5 58,9 @@ void phex16(unsigned int i)
 }
 
 
-
-
+void pbin(unsigned char c)
+{
+    for (int i=7; i>=0; i--) {
+        usb_debug_putchar((c & (1<<i)) ? '1' : '0');
+    }
+}

@@ 12,5 12,6 @@
 void print_P(const char *s);
 void phex(unsigned char c);
 void phex16(unsigned int i);
+void pbin(unsigned char c);
 
 #endif

@@ 0,0 1,273 @@
+/* Some modified from Keyboard Upgrade 0.3.0
+ * 2010/08/22
+ */
+/*
+ * Keyboard Upgrade -- Firmware for homebrew computer keyboard controllers.
+ * Copyright (C) 2009  Robert Homann
+ *
+ * Based on RUMP (http://mg8.org/rump/), Copyright (C) 2008  Chris Lee
+ *
+ * Based on c64key (http://symlink.dk/projects/c64key/),
+ * Copyright (C) 2006-2007  Mikkel Holm Olsen
+ *
+ * Based on HID-Test by Christian Starkjohann, Objective Development
+ *
+ * This file is part of the Keyboard Upgrade package.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Keyboard Upgrade package; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA
+ */
+
+#ifndef USBKEYCODES_H
+#define USBKEYCODES_H
+
+/*
+ * The USB keycodes are enumerated here - the first part is simply
+ * an enumeration of the allowed scan-codes used for USB HID devices.
+ */
+/*
+ * see 10 Keyboard/Keypad Page(0x07)
+ * http://www.usb.org/developers/devclass_docs/Hut1_12.pdf
+ */
+enum keycodes {
+    KB_NO = 0,
+    KB_ROLL_OVER,
+    KB_POST_FAIL,
+    KB_UNDEFINED,
+    KB_A,
+    KB_B,
+    KB_C,
+    KB_D,
+    KB_E,
+    KB_F,
+    KB_G,
+    KB_H,
+    KB_I,
+    KB_J,
+    KB_K,
+    KB_L,
+    KB_M,       /* 0x10 */
+    KB_N,
+    KB_O,
+    KB_P,
+    KB_Q,
+    KB_R,
+    KB_S,
+    KB_T,
+    KB_U,
+    KB_V,
+    KB_W,
+    KB_X,
+    KB_Y,
+    KB_Z,
+    KB_1,
+    KB_2,
+    KB_3,       /* 0x20 */
+    KB_4,
+    KB_5,
+    KB_6,
+    KB_7,
+    KB_8,
+    KB_9,
+    KB_0,
+    KB_ENTER,
+    KB_ESCAPE,
+    KB_BSPACE,
+    KB_TAB,
+    KB_SPACE,
+    KB_MINUS,
+    KB_EQUAL,
+    KB_LBRACKET,          /* [ */
+    KB_RBRACKET,          /* ] */
+    KB_BSLASH,            /* \ (and |) */
+    KB_NONUS_HASH,        /* Non-US # and ~ */
+    KB_SCOLON,            /* ; (and :) */
+    KB_QUOTE,             /* ' and " */
+    KB_GRAVE,             /* Grave accent and tilde */
+    KB_COMMA,             /* , and < */
+    KB_DOT,               /* . and > */
+    KB_SLASH,             /* / and ? */
+    KB_CAPSLOCK,
+    KB_F1,
+    KB_F2,
+    KB_F3,
+    KB_F4,
+    KB_F5,
+    KB_F6,
+    KB_F7,      /* 0x40 */
+    KB_F8,
+    KB_F9,
+    KB_F10,
+    KB_F11,
+    KB_F12,
+    KB_PSCREEN,
+    KB_SCKLOCK,
+    KB_BREAK,
+    KB_INSERT,
+    KB_HOME,
+    KB_PGUP,
+    KB_DELETE,
+    KB_END,
+    KB_PGDOWN,
+    KB_RIGHT,
+    KB_LEFT,    /* 0x50 */
+    KB_DOWN,
+    KB_UP,
+    KB_NUMLOCK,
+    KP_SLASH,
+    KP_ASTERISK,
+    KP_MINUS,
+    KP_PLUS,
+    KP_ENTER,
+    KP_1,
+    KP_2,
+    KP_3,
+    KP_4,
+    KP_5,
+    KP_6,
+    KP_7,
+    KP_8,       /* 0x60 */
+    KP_9,
+    KP_0,
+    KP_DOT,
+    KB_NONUS_BSLASH,      /* Non-US \ and | */
+    KB_APPLICATION,
+    KB_POWER,
+    KP_EQUAL,
+    KB_F13,
+    KB_F14,
+    KB_F15,
+    KB_F16,
+    KB_F17,
+    KB_F18,
+    KB_F19,
+    KB_F20,
+    KB_F21,     /* 0x70 */
+    KB_F22,
+    KB_F23,
+    KB_F24,
+    KB_EXECUTE,
+    KB_HELP,
+    KB_MENU,
+    KB_SELECT,
+    KB_STOP,
+    KB_AGAIN,
+    KB_UNDO,
+    KB_CUT,
+    KB_COPY,
+    KB_PASTE,
+    KB_FIND,
+    KB_MUTE,
+    KB_VOLUP,   /* 0x80 */
+    KB_VOLDOWN,
+    KB_LOCKING_CAPS,      /* locking Caps Lock */
+    KB_LOCKING_NUM,       /* locking Num Lock */
+    KB_LOCKING_SCROLL,    /* locking Scroll Lock */
+    KP_COMMA,
+    KP_EQUAL_AS400,       /* equal sign on AS/400 */
+    KB_INT1,
+    KB_INT2,
+    KB_INT3,
+    KB_INT4,
+    KB_INT5,
+    KB_INT6,
+    KB_INT7,
+    KB_INT8,
+    KB_INT9,
+    KB_LANG1,    /* 0x90 */
+    KB_LANG2,
+    KB_LANG3,
+    KB_LANG4,
+    KB_LANG5,
+    KB_LANG6,
+    KB_LANG7,
+    KB_LANG8,
+    KB_LANG9,
+    KB_ALT_ERASE,
+    KB_SYSREQ,
+    KB_CANCEL,
+    KB_CLEAR,
+    KB_PRIOR,
+    KB_RETURN,
+    KB_SEPARATOR,
+    KB_OUT,
+    KB_OPER,
+    KB_CLEAR_AGAIN,
+    KB_CRSEL,
+    KB_EXSEL,
+
+    KP_00 = 0xB0,
+    KP_000,
+    KB_THOUSANDS_SEPARATOR,
+    KB_DECIMAL_SEPARATOR,
+    CURRENCY_UNIT,
+    CURRENCY_SUB_UNIT,
+    KP_LPAREN,
+    KP_RPAREN,
+    KP_LCBRACKET,         /* { */
+    KP_RCBRACKET,         /* } */
+    KP_TAB,
+    KP_BSPACE,
+    KP_A,
+    KP_B,
+    KP_C,
+    KP_D,
+    KP_E,
+    KP_F,
+    KP_XOR,
+    KP_HAT,
+    KP_PERC,
+    KP_LT,
+    KP_GT,
+    KP_AND,
+    KP_LAZYAND,
+    KP_OR,
+    KP_LAZYOR,
+    KP_COLON,
+    KP_HASH,
+    KP_SPACE,
+    KP_ATMARK,
+    KP_EXCLAMATION,
+    KP_MEM_STORE,
+    KP_MEM_RECALL,
+    KP_MEM_CLEAR,
+    KP_MEM_ADD,
+    KP_MEM_SUB,
+    KP_MEM_MUL,
+    KP_MEM_DIV,
+    KP_PLUS_MINUS,
+    KP_CLEAR,
+    KP_CLEAR_ENTRY,
+    KP_BINARY,
+    KP_OCTAL,
+    KP_DECIMAL,
+    KP_HEXADECIMAL,
+
+    /*
+     * These are NOT standard USB HID - handled specially in decoding,
+     * so they will be mapped to the modifier byte in the USB report.
+     */
+    MOD_START = 0xE0,
+    KB_LCTRL = 0xE0,    /* 0x01 */
+    KB_LSHIFT,          /* 0x02 */
+    KB_LALT,            /* 0x04 */
+    KB_LGUI,            /* 0x08 */
+    KB_RCTRL,           /* 0x10 */
+    KB_RSHIFT,          /* 0x20 */
+    KB_RALT,            /* 0x40 */
+    KB_RGUI,            /* 0x80 */
+};
+
+#endif /* USBKEYCODES_H */