M keyboards/wilba_tech/rama_works_kara/config.h => keyboards/wilba_tech/rama_works_kara/config.h +0 -5
@@ 20,11 20,6 @@
#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
#define IS31FL3731_LED_COUNT 72
-// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
-#define LOCKING_SUPPORT_ENABLE
-// Locking resynchronize hack
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/rama_works_kara/keyboard.json => keyboards/wilba_tech/rama_works_kara/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
M keyboards/wilba_tech/rama_works_koyu/config.h => keyboards/wilba_tech/rama_works_koyu/config.h +0 -6
@@ 20,12 20,6 @@
#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
#define IS31FL3731_LED_COUNT 72
-// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
-#define LOCKING_SUPPORT_ENABLE
-// Locking resynchronize hack
-#define LOCKING_RESYNC_ENABLE
-
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/rama_works_koyu/keyboard.json => keyboards/wilba_tech/rama_works_koyu/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/rama_works_m10_b/config.h => keyboards/wilba_tech/rama_works_m10_b/config.h +0 -39
@@ 1,39 0,0 @@
-/*
-Copyright 2018 Wilba
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
M keyboards/wilba_tech/rama_works_m10_b/keyboard.json => keyboards/wilba_tech/rama_works_m10_b/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"],
"rows": ["E6"]
M keyboards/wilba_tech/rama_works_m10_c/config.h => keyboards/wilba_tech/rama_works_m10_c/config.h +0 -5
@@ 15,11 15,6 @@
*/
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
// IS31FL3731 driver
#define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
#define IS31FL3731_LED_COUNT 12
M keyboards/wilba_tech/rama_works_m10_c/keyboard.json => keyboards/wilba_tech/rama_works_m10_c/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"],
"rows": ["E6"]
M keyboards/wilba_tech/rama_works_m50_a/config.h => keyboards/wilba_tech/rama_works_m50_a/config.h +0 -5
@@ 15,11 15,6 @@
*/
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
// IS31FL3731 driver
#define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
M keyboards/wilba_tech/rama_works_m50_a/keyboard.json => keyboards/wilba_tech/rama_works_m50_a/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F4", "B5", "C7", "C6", "B6", "B2", "B3", "B1", "B4", "D7", "D6", "D4", "D3"],
"rows": ["F0", "F1", "F5", "F6"]
D keyboards/wilba_tech/rama_works_m50_ax/config.h => keyboards/wilba_tech/rama_works_m50_ax/config.h +0 -21
@@ 1,21 0,0 @@
-/* Copyright 2020 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/rama_works_m50_ax/keyboard.json => keyboards/wilba_tech/rama_works_m50_ax/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F4", "B5", "C7", "C6", "B6", "B2", "B3", "B1", "B4", "D7", "D6", "D4", "D3"],
"rows": ["F0", "F1", "F5", "F6"]
M keyboards/wilba_tech/rama_works_m60_a/config.h => keyboards/wilba_tech/rama_works_m60_a/config.h +0 -5
@@ 20,11 20,6 @@
#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
#define IS31FL3731_LED_COUNT 72
-// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
-#define LOCKING_SUPPORT_ENABLE
-// Locking resynchronize hack
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/rama_works_m60_a/keyboard.json => keyboards/wilba_tech/rama_works_m60_a/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
M keyboards/wilba_tech/rama_works_m65_b/config.h => keyboards/wilba_tech/rama_works_m65_b/config.h +0 -5
@@ 15,11 15,6 @@
*/
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
// IS31FL3731 driver
#define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
M keyboards/wilba_tech/rama_works_m65_b/keyboard.json => keyboards/wilba_tech/rama_works_m65_b/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
M keyboards/wilba_tech/rama_works_m65_bx/config.h => keyboards/wilba_tech/rama_works_m65_bx/config.h +0 -5
@@ 15,11 15,6 @@
*/
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
// IS31FL3731 driver
#define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
M keyboards/wilba_tech/rama_works_m65_bx/keyboard.json => keyboards/wilba_tech/rama_works_m65_bx/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
M keyboards/wilba_tech/rama_works_m6_a/config.h => keyboards/wilba_tech/rama_works_m6_a/config.h +0 -5
@@ 15,11 15,6 @@
*/
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
#define RGB_BACKLIGHT_ENABLED 0
// NOTE: M6-A doesn't use RGB backlight, but we keep this
M keyboards/wilba_tech/rama_works_m6_a/keyboard.json => keyboards/wilba_tech/rama_works_m6_a/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D4", "B5", "F4", "D7", "C6", "F6"],
"rows": ["E6"]
M keyboards/wilba_tech/rama_works_m6_b/config.h => keyboards/wilba_tech/rama_works_m6_b/config.h +0 -5
@@ 15,11 15,6 @@
*/
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
#define IS31FL3218_LED_COUNT 6
#define RGB_BACKLIGHT_ENABLED 1
M keyboards/wilba_tech/rama_works_m6_b/keyboard.json => keyboards/wilba_tech/rama_works_m6_b/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D4", "B5", "F4", "D7", "C6", "F6"],
"rows": ["E6"]
M keyboards/wilba_tech/rama_works_u80_a/config.h => keyboards/wilba_tech/rama_works_u80_a/config.h +0 -5
@@ 16,11 16,6 @@
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/rama_works_u80_a/keyboard.json => keyboards/wilba_tech/rama_works_u80_a/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"],
"rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
M keyboards/wilba_tech/wt60_a/config.h => keyboards/wilba_tech/wt60_a/config.h +0 -5
@@ 16,11 16,6 @@
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/wt60_a/keyboard.json => keyboards/wilba_tech/wt60_a/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
"rows": ["F0", "E6", "F4", "F6", "F7"]
M keyboards/wilba_tech/wt60_b/config.h => keyboards/wilba_tech/wt60_b/config.h +0 -6
@@ 16,12 16,6 @@
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-
// IS31FL3731 driver
#define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
M keyboards/wilba_tech/wt60_b/keyboard.json => keyboards/wilba_tech/wt60_b/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
M keyboards/wilba_tech/wt60_bx/config.h => keyboards/wilba_tech/wt60_bx/config.h +0 -6
@@ 16,12 16,6 @@
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-
// IS31FL3731 driver
#define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
M keyboards/wilba_tech/wt60_bx/keyboard.json => keyboards/wilba_tech/wt60_bx/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
M keyboards/wilba_tech/wt60_c/config.h => keyboards/wilba_tech/wt60_c/config.h +0 -6
@@ 16,12 16,6 @@
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-
// IS31FL3731 driver
#define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
M keyboards/wilba_tech/wt60_c/keyboard.json => keyboards/wilba_tech/wt60_c/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt60_d/config.h => keyboards/wilba_tech/wt60_d/config.h +0 -22
@@ 1,22 0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt60_d/keyboard.json => keyboards/wilba_tech/wt60_d/keyboard.json +6 -0
@@ 10,6 10,12 @@
"mousekey": true,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"indicators": {
"caps_lock": "F1"
},
D keyboards/wilba_tech/wt60_g/config.h => keyboards/wilba_tech/wt60_g/config.h +0 -22
@@ 1,22 0,0 @@
-/* Copyright 2020 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt60_g/keyboard.json => keyboards/wilba_tech/wt60_g/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt60_g2/config.h => keyboards/wilba_tech/wt60_g2/config.h +0 -22
@@ 1,22 0,0 @@
-/* Copyright 2021 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt60_g2/keyboard.json => keyboards/wilba_tech/wt60_g2/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt60_h1/config.h => keyboards/wilba_tech/wt60_h1/config.h +0 -9
@@ 1,9 0,0 @@
-// Copyright 2023 Jason Williams (@wilba)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt60_h1/keyboard.json => keyboards/wilba_tech/wt60_h1/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt60_h2/config.h => keyboards/wilba_tech/wt60_h2/config.h +0 -22
@@ 1,22 0,0 @@
-/* Copyright 2020 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt60_h2/keyboard.json => keyboards/wilba_tech/wt60_h2/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt60_h3/config.h => keyboards/wilba_tech/wt60_h3/config.h +0 -9
@@ 1,9 0,0 @@
-// Copyright 2023 Jason Williams (@wilba)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt60_h3/keyboard.json => keyboards/wilba_tech/wt60_h3/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
M keyboards/wilba_tech/wt60_xt/config.h => keyboards/wilba_tech/wt60_xt/config.h +0 -5
@@ 20,11 20,6 @@
#define AUDIO_PIN C6
#define AUDIO_CLICKY
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/wt60_xt/keyboard.json => keyboards/wilba_tech/wt60_xt/keyboard.json +6 -0
@@ 17,6 17,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "E6", "F4", "F6", "F7"]
M keyboards/wilba_tech/wt65_a/config.h => keyboards/wilba_tech/wt65_a/config.h +0 -5
@@ 16,11 16,6 @@
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/wt65_a/keyboard.json => keyboards/wilba_tech/wt65_a/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "E6", "F4", "F6", "F7"]
M keyboards/wilba_tech/wt65_b/config.h => keyboards/wilba_tech/wt65_b/config.h +0 -5
@@ 16,11 16,6 @@
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/wt65_b/keyboard.json => keyboards/wilba_tech/wt65_b/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "E6", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt65_d/config.h => keyboards/wilba_tech/wt65_d/config.h +0 -10
@@ 1,10 0,0 @@
-// Copyright 2022 Jason Williams (@wilba)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
-#define LOCKING_SUPPORT_ENABLE
-
-// Locking resynchronize hack
-#define LOCKING_RESYNC_ENABLE>
\ No newline at end of file
M keyboards/wilba_tech/wt65_d/keyboard.json => keyboards/wilba_tech/wt65_d/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "D3", "D2", "B7", "B0", "B3", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["E6", "F0", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt65_f/config.h => keyboards/wilba_tech/wt65_f/config.h +0 -22
@@ 1,22 0,0 @@
-/* Copyright 2021 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt65_f/keyboard.json => keyboards/wilba_tech/wt65_f/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt65_fx/config.h => keyboards/wilba_tech/wt65_fx/config.h +0 -22
@@ 1,22 0,0 @@
-/* Copyright 2021 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt65_fx/keyboard.json => keyboards/wilba_tech/wt65_fx/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt65_g/config.h => keyboards/wilba_tech/wt65_g/config.h +0 -22
@@ 1,22 0,0 @@
-/* Copyright 2020 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt65_g/keyboard.json => keyboards/wilba_tech/wt65_g/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt65_g2/config.h => keyboards/wilba_tech/wt65_g2/config.h +0 -22
@@ 1,22 0,0 @@
-/* Copyright 2020 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt65_g2/keyboard.json => keyboards/wilba_tech/wt65_g2/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt65_h1/config.h => keyboards/wilba_tech/wt65_h1/config.h +0 -22
@@ 1,22 0,0 @@
-/* Copyright 2020 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt65_h1/keyboard.json => keyboards/wilba_tech/wt65_h1/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt65_xt/config.h => keyboards/wilba_tech/wt65_xt/config.h +0 -22
@@ 1,22 0,0 @@
-/* Copyright 2020 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt65_xt/keyboard.json => keyboards/wilba_tech/wt65_xt/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt65_xtx/config.h => keyboards/wilba_tech/wt65_xtx/config.h +0 -21
@@ 1,21 0,0 @@
-/* Copyright 2020 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt65_xtx/keyboard.json => keyboards/wilba_tech/wt65_xtx/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt69_a/config.h => keyboards/wilba_tech/wt69_a/config.h +0 -38
@@ 1,38 0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
M keyboards/wilba_tech/wt69_a/keyboard.json => keyboards/wilba_tech/wt69_a/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "E6", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt70_jb/config.h => keyboards/wilba_tech/wt70_jb/config.h +0 -21
@@ 1,21 0,0 @@
-/* Copyright 2020 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt70_jb/keyboard.json => keyboards/wilba_tech/wt70_jb/keyboard.json +6 -0
@@ 37,6 37,12 @@
"nkro": true,
"rgblight": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "D3", "D2", "D1", "D0", "B7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B0", "B3"],
"rows": ["E6", "F0", "F4", "F6", "F7"]
M keyboards/wilba_tech/wt75_a/config.h => keyboards/wilba_tech/wt75_a/config.h +0 -5
@@ 16,11 16,6 @@
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/wt75_a/keyboard.json => keyboards/wilba_tech/wt75_a/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
M keyboards/wilba_tech/wt75_b/config.h => keyboards/wilba_tech/wt75_b/config.h +0 -5
@@ 16,11 16,6 @@
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/wt75_b/keyboard.json => keyboards/wilba_tech/wt75_b/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B7", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B2", "D4"],
"rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
M keyboards/wilba_tech/wt75_c/config.h => keyboards/wilba_tech/wt75_c/config.h +0 -5
@@ 16,11 16,6 @@
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/wt75_c/keyboard.json => keyboards/wilba_tech/wt75_c/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B7", "D4"],
"rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
M keyboards/wilba_tech/wt80_a/config.h => keyboards/wilba_tech/wt80_a/config.h +0 -5
@@ 16,11 16,6 @@
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/wt80_a/keyboard.json => keyboards/wilba_tech/wt80_a/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"],
"rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
D keyboards/wilba_tech/wt80_g/config.h => keyboards/wilba_tech/wt80_g/config.h +0 -22
@@ 1,22 0,0 @@
-/* Copyright 2020 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wilba_tech/wt80_g/keyboard.json => keyboards/wilba_tech/wt80_g/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"],
"rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
M keyboards/wilba_tech/zeal60/config.h => keyboards/wilba_tech/zeal60/config.h +0 -5
@@ 20,11 20,6 @@
#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
#define IS31FL3731_LED_COUNT 72
-// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
-#define LOCKING_SUPPORT_ENABLE
-// Locking resynchronize hack
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/zeal60/keyboard.json => keyboards/wilba_tech/zeal60/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
M keyboards/wilba_tech/zeal65/config.h => keyboards/wilba_tech/zeal65/config.h +0 -5
@@ 20,11 20,6 @@
#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
#define IS31FL3731_LED_COUNT 72
-// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
-#define LOCKING_SUPPORT_ENABLE
-// Locking resynchronize hack
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/wilba_tech/zeal65/keyboard.json => keyboards/wilba_tech/zeal65/keyboard.json +6 -0
@@ 14,6 14,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F0", "F1", "F4", "F6", "F7"]
M keyboards/woodkeys/meira/featherble/config.h => keyboards/woodkeys/meira/featherble/config.h +0 -5
@@ 36,11 36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define AUDIO_PIN B5
#define AUDIO_VOICES
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
M keyboards/woodkeys/meira/featherble/keyboard.json => keyboards/woodkeys/meira/featherble/keyboard.json +6 -0
@@ 1,6 1,12 @@
{
"processor": "atmega32u4",
"bootloader": "caterina",
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"bluetooth": {
"driver": "bluefruit_le"
},
D keyboards/wsk/alpha9/config.h => keyboards/wsk/alpha9/config.h +0 -23
@@ 1,23 0,0 @@
-/* Copyright 2020 Worldspawn <mcmancuso@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wsk/alpha9/keyboard.json => keyboards/wsk/alpha9/keyboard.json +6 -0
@@ 17,6 17,12 @@
"nkro": true,
"rgblight": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D7", "E6", "C6", "B6", "B2", "B3", "B1", "F7", "F6", "F5", "D1", "D0", "D2"],
"rows": ["D4", "B4", "B5"]
D keyboards/wsk/g4m3ralpha/config.h => keyboards/wsk/g4m3ralpha/config.h +0 -23
@@ 1,23 0,0 @@
-/* Copyright 2020 Worldspawn <mcmancuso@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wsk/g4m3ralpha/keyboard.json => keyboards/wsk/g4m3ralpha/keyboard.json +6 -0
@@ 37,6 37,12 @@
"nkro": true,
"rgblight": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D7", "E6", "C6", "B6", "B2", "B3", "B1", "F7", "F6", "F5"],
"rows": ["D4", "B4", "B5", "D1"]
M keyboards/wsk/gothic50/config.h => keyboards/wsk/gothic50/config.h +0 -6
@@ 1,11 1,5 @@
#pragma once
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
M keyboards/wsk/gothic50/keyboard.json => keyboards/wsk/gothic50/keyboard.json +6 -0
@@ 37,6 37,12 @@
"nkro": false,
"rgblight": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["E6", "F0", "F1", "C7", "C6", "B6", "D4", "D5", "D3", "D2", "D1", "D0", "B7", "B0"],
"rows": ["B5", "B4", "D7", "D6"]
D keyboards/wsk/gothic70/config.h => keyboards/wsk/gothic70/config.h +0 -7
@@ 1,7 0,0 @@
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wsk/gothic70/keyboard.json => keyboards/wsk/gothic70/keyboard.json +6 -0
@@ 37,6 37,12 @@
"nkro": false,
"rgblight": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["F0", "F1", "E6", "C7", "C6", "B6", "D4", "B1", "B0", "B7", "B5", "B4", "D7", "D6", "B3"],
"rows": ["D0", "D1", "D2", "D3", "D5"]
D keyboards/wsk/houndstooth/config.h => keyboards/wsk/houndstooth/config.h +0 -7
@@ 1,7 0,0 @@
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wsk/houndstooth/keyboard.json => keyboards/wsk/houndstooth/keyboard.json +6 -0
@@ 19,6 19,12 @@
"mousekey": true,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D1", "F4", "D0", "F5", "D4", "F6"],
"rows": ["C6", "F7", "D7", "B1", "B4", "B2", "B5", "B6"]
D keyboards/wsk/jerkin/config.h => keyboards/wsk/jerkin/config.h +0 -7
@@ 1,7 0,0 @@
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wsk/jerkin/keyboard.json => keyboards/wsk/jerkin/keyboard.json +6 -0
@@ 16,6 16,12 @@
"mousekey": false,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D3", "D2", "D1", "D0", "D4", "C6", "B1", "F7", "F6", "F5", "F4", "E6", "D7"],
"rows": ["B3", "B4", "B5"]
D keyboards/wsk/kodachi50/config.h => keyboards/wsk/kodachi50/config.h +0 -7
@@ 1,7 0,0 @@
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wsk/kodachi50/keyboard.json => keyboards/wsk/kodachi50/keyboard.json +6 -0
@@ 37,6 37,12 @@
"nkro": true,
"rgblight": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D1", "D0", "D4", "C6", "D7", "E6", "B4"],
"rows": ["D2", "B5", "B6", "B2", "B3", "B1", "F7", "F6"]
D keyboards/wsk/pain27/config.h => keyboards/wsk/pain27/config.h +0 -7
@@ 1,7 0,0 @@
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wsk/pain27/keyboard.json => keyboards/wsk/pain27/keyboard.json +6 -0
@@ 37,6 37,12 @@
"nkro": true,
"rgblight": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D2", "B3", "F6", "B1", "B2", "B6", "D4", "C6", "D7", "E6"],
"rows": ["F4", "F5", "D0"]
D keyboards/wsk/sl40/config.h => keyboards/wsk/sl40/config.h +0 -23
@@ 1,23 0,0 @@
-/* Copyright 2020 Worldspawn <mcmancuso@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wsk/sl40/keyboard.json => keyboards/wsk/sl40/keyboard.json +6 -0
@@ 37,6 37,12 @@
"nkro": true,
"rgblight": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D3", "D1", "F6", "F7", "B6", "B2", "B3", "B1", "D4", "C6", "D7", "E6", "B4", "B5"],
"rows": ["F4", "F5", "D2", "D0"]
D keyboards/wsk/tkl30/config.h => keyboards/wsk/tkl30/config.h +0 -7
@@ 1,7 0,0 @@
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wsk/tkl30/keyboard.json => keyboards/wsk/tkl30/keyboard.json +6 -0
@@ 36,6 36,12 @@
"mousekey": true,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D3", "D1", "D0", "D4", "F7", "C6", "B1", "D7", "B3", "E6", "B2", "B4", "B6", "F6", "E5"],
"rows": ["D2", "B5", "F4"]
D keyboards/wuque/ikki68/config.h => keyboards/wuque/ikki68/config.h +0 -24
@@ 1,24 0,0 @@
-/*
-Copyright 2020 wuquestudio
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wuque/ikki68/keyboard.json => keyboards/wuque/ikki68/keyboard.json +6 -0
@@ 39,6 39,12 @@
"nkro": true,
"rgblight": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D1", "D0", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "F0", "F1", "B6", "F4", "F5", "F6", "F7"],
"rows": ["B0", "B1", "B2", "B3", "E6"]
D keyboards/wuque/mammoth20x/config.h => keyboards/wuque/mammoth20x/config.h +0 -24
@@ 1,24 0,0 @@
-/*
-Copyright 2021 wuquestudio
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wuque/mammoth20x/keyboard.json => keyboards/wuque/mammoth20x/keyboard.json +6 -0
@@ 17,6 17,12 @@
"mousekey": true,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["B0", "B1", "E6", "F7"],
"rows": ["D5", "F0", "F1", "F4", "F5", "F6"]
D keyboards/wuque/mammoth75x/config.h => keyboards/wuque/mammoth75x/config.h +0 -24
@@ 1,24 0,0 @@
-/*
-Copyright 2021 wuquestudio
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wuque/mammoth75x/keyboard.json => keyboards/wuque/mammoth75x/keyboard.json +6 -0
@@ 17,6 17,12 @@
"mousekey": true,
"nkro": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["D3", "D5", "D4", "D6", "D7", "B4", "B5", "E6", "F0", "F1", "F4", "F5", "F6", "C6", "B7", "B3"],
"rows": ["B0", "C7", "D2", "F7", "D1", "D0"]
D keyboards/wuque/nemui65/config.h => keyboards/wuque/nemui65/config.h +0 -24
@@ 1,24 0,0 @@
-/* Copyright 2023 wuque
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
M keyboards/wuque/nemui65/keyboard.json => keyboards/wuque/nemui65/keyboard.json +6 -0
@@ 20,6 20,12 @@
"nkro": true,
"rbglight": true
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F6",
D keyboards/wuque/tata80/wk/config.h => keyboards/wuque/tata80/wk/config.h +0 -21
@@ 1,21 0,0 @@
-/* Copyright 2022 wuque
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wuque/tata80/wk/keyboard.json => keyboards/wuque/tata80/wk/keyboard.json +6 -0
@@ 17,6 17,12 @@
"mousekey": false,
"nkro": false
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0", "B7", "B3", "B2", "B1", "B0"],
"rows": ["F0", "F1", "F4", "F5", "F6", "F7"]
D keyboards/wuque/tata80/wkl/config.h => keyboards/wuque/tata80/wkl/config.h +0 -21
@@ 1,21 0,0 @@
-/* Copyright 2022 wuque
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
M keyboards/wuque/tata80/wkl/keyboard.json => keyboards/wuque/tata80/wkl/keyboard.json +6 -0
@@ 17,6 17,12 @@
"mousekey": false,
"nkro": false
},
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
"matrix_pins": {
"cols": ["C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0", "B7", "B3", "B2", "B1", "B0"],
"rows": ["F0", "F1", "F4", "F5", "F6", "F7"]