13 files changed, 317 insertions(+), 0 deletions(-)

A keyboards/crypt_macro/config.h
A keyboards/crypt_macro/crypt_macro.c
A keyboards/crypt_macro/crypt_macro.h
A keyboards/crypt_macro/halconf.h
A keyboards/crypt_macro/info.json
A keyboards/crypt_macro/keymaps/default/keymap.c
A keyboards/crypt_macro/keymaps/default/readme.md
A keyboards/crypt_macro/keymaps/via/keymap.c
A keyboards/crypt_macro/keymaps/via/readme.md
A keyboards/crypt_macro/keymaps/via/rules.mk
A keyboards/crypt_macro/mcuconf.h
A keyboards/crypt_macro/readme.md
A keyboards/crypt_macro/rules.mk

@@ 0,0 1,92 @@
+/*
+Copyright 2022 Yiancar-Designs
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published byß
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+#define DIRECT_PINS { \
+    { B12,    B6, B7    }, \
+    { NO_PIN, B5, NO_PIN}  \
+}
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
+#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+
+/* RGB Light */
+#define WS2812_PWM_DRIVER PWMD3
+#define WS2812_PWM_CHANNEL 1
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM3
+#define WS2812_DMA_CHANNEL 3
+#define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB
+
+#define RGB_DI_PIN B4
+#define RGBLED_NUM 11
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0

@@ 0,0 1,16 @@
+/* Copyright 2022 Yiancar-Designs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "crypt_macro.h"

@@ 0,0 1,28 @@
+/* Copyright 2022 Yiancar-Designs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define XXX KC_NO
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00, K01, K02, \
+         K11       \
+) { \
+    { K00, K01, K02 }, \
+    { XXX, K11, XXX }  \
+}

@@ 0,0 1,21 @@
+/* Copyright 2022 Yiancar-Designs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>

@@ 0,0 1,16 @@
+{
+    "keyboard_name": "Crypt Macro",
+    "manufacturer": "Yiancar-Designs",
+    "url": "https://yiancar-designs.com",
+    "maintainer": "Yiancar-Designs",
+    "usb": {
+        "vid": "0x8968",
+        "pid": "0x434D",
+        "device_version": "0.0.1"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":0.5, "y":1, "w":2}]
+        }
+    }
+}

@@ 0,0 1,26 @@
+/* Copyright 2022 Yiancar-Designs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( /* Base */
+    KC_VOLU, KC_VOLD, KC_MPLY,
+             MO(1)           ),
+
+[1] = LAYOUT( /* FN */
+    LCTL(KC_X), LCTL(KC_C), LCTL(KC_V),
+                KC_TRNS               )
+};

@@ 0,0 1,1 @@
+# The default keymap for Crypt Macro. VIA support disabled.

@@ 0,0 1,34 @@
+/* Copyright 2022 Yiancar-Designs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( /* Base */
+    KC_VOLU, KC_VOLD, KC_MPLY,
+             MO(1)           ),
+
+[1] = LAYOUT( /* FN */
+    LCTL(KC_X), LCTL(KC_C), LCTL(KC_V),
+                KC_TRNS               ),
+
+[2] = LAYOUT( /* Empty for dynamic keymaps */
+    KC_TRNS, KC_TRNS, KC_TRNS,
+             KC_TRNS         ),
+
+[3] = LAYOUT( /* Empty for dynamic keymaps */
+    KC_TRNS, KC_TRNS, KC_TRNS,
+             KC_TRNS         )
+};

@@ 0,0 1,1 @@
+# The default keymap for Crypt Macro. VIA support enabled.

@@ 0,0 1,1 @@
+VIA_ENABLE = yes

@@ 0,0 1,22 @@
+/* Copyright 2022 Yiancar-Designs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_PWM_USE_TIM3
+#define STM32_PWM_USE_TIM3 TRUE

@@ 0,0 1,32 @@
+# Crypt Macro
+
+This is a macropad PCB. It supports VIA.
+
+* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)
+* Hardware Supported: A macropad with STM32F072CB
+* Hardware Availability: https://www.nzcaps.com/ 
+
+## Instructions
+
+### Build
+
+Make example for this keyboard (after setting up your build environment):
+
+    make crypt_macro:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+### Reset
+
+- Unplug
+- Hold top left key
+- Plug In
+- Unplug
+- Release Escape
+
+### Flash
+
+- Unplug
+- Hold top left key
+- Plug In
+- Flash using QMK Toolbox or CLI (`make crypt_macro:<keymap>:flash`)

@@ 0,0 1,27 @@
+# MCU name
+MCU = STM32F072
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+WS2812_DRIVER = pwm         # Driver for RGB uderglow
+AUDIO_ENABLE = no           # Audio output