~ruther/qmk_firmware

8574bf20d35b21c7b44ba8550fa11b4d100fdbbd — Ryan 4 years ago a01057d
Remove more cruft in keyboard files (#14288)

M keyboards/cu75/cu75.c => keyboards/cu75/cu75.c +4 -4
@@ 28,12 28,12 @@ void matrix_init_kb(void)
    audio_init();
    PLAY_SONG(test_sound);
    // Fix port B5
    cbi(DDRB, 5);
    sbi(PORTB, 5);
    setPinInput(B5);
    writePinHigh(B5);
#else
    // If we're not using the audio pin, drive it low
    sbi(DDRC, 6);
    cbi(PORTC, 6);
    setPinOutput(C6);
    writePinLow(C6);
#endif
#ifdef ISSI_ENABLE
    issi_init();

M keyboards/cu75/cu75.h => keyboards/cu75/cu75.h +0 -16
@@ 1,26 1,10 @@
#ifndef CU75_H
#define CU75_H

/* if the kb.h file exists (because we're running from qmkbuilder) include it */
#ifdef __has_include
#if __has_include("kb.h")
#include "kb.h"
#endif
#endif

#include "quantum.h"
#include "matrix.h"
#include <avr/sfr_defs.h>

#ifndef cbi
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif

#ifndef sbi
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif


typedef struct RGB_Color {
    uint16_t red;
    uint16_t green;

M keyboards/ergotaco/ergotaco.h => keyboards/ergotaco/ergotaco.h +0 -2
@@ 9,8 9,6 @@

extern i2c_status_t mcp23018_status;
#define ERGODOX_EZ_I2C_TIMEOUT 1000
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define CPU_16MHz       0x00

// I2C aliases and register addresses (see "mcp23018.md")
//#define I2C_ADDR        0b0100000

M keyboards/georgi/georgi.h => keyboards/georgi/georgi.h +0 -2
@@ 9,8 9,6 @@

extern i2c_status_t mcp23018_status;
#define ERGODOX_EZ_I2C_TIMEOUT 1000
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define CPU_16MHz       0x00

// I2C aliases and register addresses (see "mcp23018.md")
//#define I2C_ADDR        0b0100000

M keyboards/gergo/gergo.h => keyboards/gergo/gergo.h +0 -2
@@ 9,8 9,6 @@

extern i2c_status_t mcp23018_status;
#define I2C_TIMEOUT 1000
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define CPU_16MHz       0x00

// I2C aliases and register addresses (see "mcp23018.md")
//#define I2C_ADDR        0b0100000

M keyboards/handwired/dactyl/dactyl.h => keyboards/handwired/dactyl/dactyl.h +0 -3
@@ 7,9 7,6 @@
#include "i2cmaster.h"
#include <util/delay.h>

#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define CPU_16MHz       0x00

#define I2C_ADDR        0b0100000
#define I2C_ADDR_WRITE  ( (I2C_ADDR<<1) | I2C_WRITE )
#define I2C_ADDR_READ   ( (I2C_ADDR<<1) | I2C_READ  )

M keyboards/handwired/frenchdev/frenchdev.h => keyboards/handwired/frenchdev/frenchdev.h +0 -3
@@ 6,9 6,6 @@
#include "i2c_master.h"
#include <util/delay.h>

#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define CPU_16MHz       0x00

// I2C aliases and register addresses (see "mcp23018.md" on tmk repository)
#define I2C_ADDR        0b0100000
#define I2C_ADDR_WRITE  ( (I2C_ADDR<<1) | I2C_WRITE )

M keyboards/hotdox/hotdox.h => keyboards/hotdox/hotdox.h +0 -3
@@ 4,9 4,6 @@
#include <stdint.h>
#include <stdbool.h>

#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define CPU_16MHz       0x00

void init_ergodox(void);

inline void ergodox_board_led_on(void)    { DDRB |= (1<<PB7); PORTB |= (1<<PB7);  }

M keyboards/ktec/ergodone/ergodone.h => keyboards/ktec/ergodone/ergodone.h +0 -3
@@ 5,9 5,6 @@
#include <stdint.h>
#include <stdbool.h>

#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define CPU_16MHz       0x00

void init_ergodox(void);

inline void ergodox_right_led_1_off(void) { DDRB &= ~(1<<PB5); PORTB &= ~(1<<PB5); }

M keyboards/lfkeyboards/lfk65_hs/lfk65_hs.h => keyboards/lfkeyboards/lfk65_hs/lfk65_hs.h +0 -15
@@ 1,26 1,11 @@
#ifndef LFK65_HS_H
#define LFK65_HS_H

/* if the kb.h file exists (because we're running from qmkbuilder) include it */
#ifdef __has_include
#if __has_include("kb.h")
#include "kb.h"
#endif
#endif

#include "quantum.h"
#include "matrix.h"
#include <avr/sfr_defs.h>
#include <stdint.h>

#ifndef cbi
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif

#ifndef sbi
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif

void reset_keyboard_kb(void);

// readability

M keyboards/lfkeyboards/lfk87/lfk87.c => keyboards/lfkeyboards/lfk87/lfk87.c +2 -2
@@ 32,8 32,8 @@ void matrix_init_kb(void)
    set_rgb(32, 0xFF, 0x00, 0x00);  // Layer indicator, start red
#ifndef AUDIO_ENABLE
    // If we're not using the audio pin, drive it low
    sbi(DDRC, 6);
    cbi(PORTC, 6);
    setPinOutput(C6);
    writePinLow(C6);
#endif
#ifdef ISSI_ENABLE
    issi_init();

M keyboards/lfkeyboards/lfk87/lfk87.h => keyboards/lfkeyboards/lfk87/lfk87.h +0 -14
@@ 1,24 1,10 @@
#ifndef LFK87_H
#define LFK87_H

/* if the kb.h file exists (because we're running from qmkbuilder) include it */
#if __has_include("kb.h")
#include "kb.h"
#endif

#include "quantum.h"
#include "matrix.h"
#include <avr/sfr_defs.h>

#ifndef cbi
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif

#ifndef sbi
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif


typedef struct RGB_Color {
    uint16_t red;
    uint16_t green;

M keyboards/lfkeyboards/mini1800/mini1800.c => keyboards/lfkeyboards/mini1800/mini1800.c +2 -2
@@ 37,8 37,8 @@ void matrix_init_kb(void)
    set_rgb(32, 0xFF, 0x00, 0x00);  // Layer indicator, start red
#ifndef AUDIO_ENABLE
    // If we're not using the audio pin, drive it low
    sbi(DDRC, 6);
    cbi(PORTC, 6);
    setPinOutput(C6);
    writePinLow(C6);
#endif
    _delay_ms(500);
#ifdef ISSI_ENABLE

M keyboards/lfkeyboards/mini1800/mini1800.h => keyboards/lfkeyboards/mini1800/mini1800.h +0 -14
@@ 1,24 1,10 @@
#ifndef LFK87_H
#define LFK87_H

/* if the kb.h file exists (because we're running from qmkbuilder) include it */
#if __has_include("kb.h")
#include "kb.h"
#endif

#include "quantum.h"
#include "matrix.h"
#include <avr/sfr_defs.h>

#ifndef cbi
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif

#ifndef sbi
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif


typedef struct RGB_Color {
    uint16_t red;
    uint16_t green;

M keyboards/lfkeyboards/smk65/revb/revb.c => keyboards/lfkeyboards/smk65/revb/revb.c +4 -4
@@ 34,12 34,12 @@ void matrix_init_kb(void)
#ifdef AUDIO_ENABLE
    // audio_init() sets PB5 to output and drives it low, which breaks our matrix
    // so reset PB5 to input
    cbi(DDRB, 5);
    sbi(PORTB, 5);
    setPinInput(B5);
    writePinHigh(B5);
#else
    // If we're not using the audio pin, drive it low
    sbi(DDRC, 6);
    cbi(PORTC, 6);
    setPinOutput(C6);
    writePinLow(C6);
#endif

#ifdef ISSI_ENABLE

M keyboards/lfkeyboards/smk65/revb/revb.h => keyboards/lfkeyboards/smk65/revb/revb.h +0 -16
@@ 14,26 14,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

#pragma once

/* if the kb.h file exists (because we're running from qmkbuilder) include it */
#ifdef __has_include
#if __has_include("kb.h")
#include "kb.h"
#endif
#endif

#include "quantum.h"
#include "matrix.h"
#include <avr/sfr_defs.h>

#ifndef cbi
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif

#ifndef sbi
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif


typedef struct RGB_Color {
    uint16_t red;
    uint16_t green;

M keyboards/sx60/sx60.h => keyboards/sx60/sx60.h +0 -3
@@ 7,9 7,6 @@
#include "i2cmaster.h"
#include <util/delay.h>

#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define CPU_16MHz       0x00

/* I2C aliases and register addresses (see "mcp23018.md") */
#define I2C_ADDR        0b0100000
#define I2C_ADDR_WRITE  ( (I2C_ADDR<<1) | I2C_WRITE )