M keyboards/levinson/keymaps/bakingpy2u/config.h => keyboards/levinson/keymaps/bakingpy2u/config.h +1 -5
@@ 23,8 23,4 @@
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define BACKLIGHT_PIN B6
-//#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 7
-
-#endif>
\ No newline at end of file
+#endif
M keyboards/levinson/keymaps/default/config.h => keyboards/levinson/keymaps/default/config.h +1 -1
@@ 34,4 34,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define _MASTER_RIGHT
// #define EE_HANDS
-#endif>
\ No newline at end of file
+#endif
M keyboards/levinson/keymaps/default/keymap.c => keyboards/levinson/keymaps/default/keymap.c +1 -1
@@ 98,7 98,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LOWER] = KEYMAP( \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
- _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+ BL_STEP, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
A keyboards/levinson/keymaps/hexwire/README.md => keyboards/levinson/keymaps/hexwire/README.md +108 -0
@@ 0,0 1,108 @@
+Hexwire's Let's Split Layout
+============================
+
+### Changes from default layout
+
+- Main layer
+ - The right space bar key has been changed to backspace, as I only hit space with my left thumb
+ - Backtick is at the lower right and also serves goes to the 3rd function layer when held
+ - Enter key acts as shift when held
+ - Escape key acts as control when held
+ - Minus key at upper right
+- Lower layer
+ - Numbers are on the lower layer, to make it easier to use a numpad on the right hand
+ - Arrow keys
+ - Straight and curly brackets in the middle two columns
+ - Screenshot keys for MacOS
+- Upper layer
+ - Symbols are on the upper layer
+ - Media keys
+ - Page Up/Down, Home/End
+- 3rd function layer
+ - Function keys
+
+## Layouts
+
+### Qwerty
+
+```
+,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+`----+----+----+----+----+----' `----+----+----+----+----+----'
+```
+
+### Colemak
+
+```
+,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+`----+----+----+----+----+----' `----+----+----+----+----+----'
+```
+
+### Dvorak
+
+```
+,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X0 , A , O , E , U , I , D , H , R , N , S ,SLSH,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+`----+----+----+----+----+----' `----+----+----+----+----+----'
+```
+
+### Lower
+
+```
+,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ ,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , DEL , , P0 ,PDOT, ,
+`----+----+----+----+----+----' `----+----+----+----+----+----'
+```
+
+### Raise
+
+```
+,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ DEL ,MPRV,MNXT,VOLU,PGUP,UNDS, EQL ,HOME, , , ,BSLS,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ MUTE,MSTP,MPLY,VOLD,PGDN,MINS, PLUS,END , , , , ,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , , , , , ,
+`----+----+----+----+----+----' `----+----+----+----+----+----'
+```
+
+### 3rd function layer
+
+```
+,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , , , , , , ,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , , , , , , ,
+|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , , , , , ,
+`----+----+----+----+----+----' `----+----+----+----+----+----'
+```
A keyboards/levinson/keymaps/hexwire/config.h => keyboards/levinson/keymaps/hexwire/config.h +26 -0
@@ 0,0 1,26 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+#define TAPPING_TERM 150
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 8
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#endif
A keyboards/levinson/keymaps/hexwire/keymap.c => keyboards/levinson/keymaps/hexwire/keymap.c +206 -0
@@ 0,0 1,206 @@
+#include "levinson.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _FN3 5
+#define _FN4 6
+#define _ADJUST 16
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ COLEMAK,
+ DVORAK,
+ LOWER,
+ RAISE,
+ FN3,
+ FN4,
+ ADJUST,
+};
+
+#define KC_ KC_TRNS
+#define _______ KC_TRNS
+
+#define KC_CAPW LGUI(LSFT(KC_3)) // Capture whole screen
+#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen
+#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen
+#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen
+#define KC_X0 MT(MOD_LCTL, KC_ESC)
+#define KC_X1 LOWER
+#define KC_X2 RAISE
+#define KC_X3 LT(_FN3, KC_GRV)
+#define KC_X4 MT(MOD_LSFT, KC_ENT)
+#define KC_X5 BL_STEP
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_QWERTY] = KC_KEYMAP(
+ //,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X5 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+ //`----+----+----+----+----+----' `----+----+----+----+----+----'
+ ),
+
+ [_COLEMAK] = KC_KEYMAP(
+ //,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+ //`----+----+----+----+----+----' `----+----+----+----+----+----'
+ ),
+
+ [_DVORAK] = KC_KEYMAP(
+ //,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X0 , A , O , E , U , I , D , H , T , N , S ,SLSH,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+ //`----+----+----+----+----+----' `----+----+----+----+----+----'
+ ),
+
+ [_LOWER] = KC_KEYMAP(
+ //,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ ,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , DEL , , P0 ,PDOT, ,
+ //`----+----+----+----+----+----' `----+----+----+----+----+----'
+ ),
+
+ [_RAISE] = KC_KEYMAP(
+ //,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ DEL ,MPRV,MNXT,VOLU,PGUP,UNDS, EQL ,HOME, , , ,BSLS,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ MUTE,MSTP,MPLY,VOLD,PGDN,MINS, PLUS,END , , , , ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , , , , , ,
+ //`----+----+----+----+----+----' `----+----+----+----+----+----'
+ ),
+
+ [_FN3] = KC_KEYMAP(
+ //,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , , , , , , ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , , , , , , ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , , , , , ,
+ //`----+----+----+----+----+----' `----+----+----+----+----+----'
+ ),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn| | |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------'
+ */
+ [_ADJUST] = KEYMAP( \
+ _______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
+ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+ )
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float tone_dvorak[][2] = SONG(DVORAK_SOUND);
+float tone_colemak[][2] = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_qwerty);
+ #endif
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case COLEMAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_colemak);
+ #endif
+ persistent_default_layer_set(1UL<<_COLEMAK);
+ }
+ return false;
+ break;
+ case DVORAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_dvorak);
+ #endif
+ persistent_default_layer_set(1UL<<_DVORAK);
+ }
+ return false;
+ break;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ break;
+ }
+ return true;
+}
A keyboards/levinson/keymaps/hexwire/rules.mk => keyboards/levinson/keymaps/hexwire/rules.mk +5 -0
@@ 0,0 1,5 @@
+RGBLIGHT_ENABLE = yes
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
M keyboards/levinson/levinson.h => keyboards/levinson/levinson.h +5 -1
@@ 3,7 3,11 @@
#include "quantum.h"
-#include "rev1.h"
+#ifdef KEYBOARD_levinson_rev1
+ #include "rev1.h"
+#else
+ #include "rev2.h"
+#endif
// Used to create a keymap using only KC_ prefixed keys
#define KC_KEYMAP( \
M keyboards/levinson/readme.md => keyboards/levinson/readme.md +3 -3
@@ 9,12 9,12 @@ Hardware Availability: [Keebio](https://keeb.io)
Make example for this keyboard (after setting up your build environment):
- make levinson/rev1:default
+ make levinson/rev2:default
Example of flashing this keyboard:
- make levinson/rev1:default:avrdude
+ make levinson/rev2:default:avrdude
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
-A build guide for this keyboard can be found here: [Nyquist Build Guide](https://docs.keeb.io)
+A build guide for this keyboard can be found here: [Levinson Build Guide](https://docs.keeb.io)
M keyboards/levinson/rev1/config.h => keyboards/levinson/rev1/config.h +4 -0
@@ 66,6 66,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
+/* Backlight LEDs */
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_LEVELS 7
+
/*
* Feature disable options
* These options are also useful to firmware size reduction.
A keyboards/levinson/rev2/config.h => keyboards/levinson/rev2/config.h +93 -0
@@ 0,0 1,93 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include "../config.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xCEEB
+#define PRODUCT_ID 0x1146
+#define DEVICE_VER 0x0200
+#define MANUFACTURER Keebio
+#define PRODUCT Levinson
+#define DESCRIPTION Split 40 percent ortholinear keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, D7, E6, B4 }
+#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
+
+
+#define CATERINA_BOOTLOADER
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 7
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 12 // Number of LEDs
+#define ws2812_PORTREG PORTD
+#define ws2812_DDRREG DDRD
+
+/* Backlight LEDs */
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_LEVELS 7
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+
+#endif
A keyboards/levinson/rev2/rev2.c => keyboards/levinson/rev2/rev2.c +39 -0
@@ 0,0 1,39 @@
+#include "levinson.h"
+
+#ifdef AUDIO_ENABLE
+ float tone_startup[][2] = SONG(STARTUP_SOUND);
+ float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+ led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+
+ #ifdef AUDIO_ENABLE
+ _delay_ms(20); // gets rid of tick
+ PLAY_SONG(tone_startup);
+ #endif
+
+ // // green led on
+ // DDRD |= (1<<5);
+ // PORTD &= ~(1<<5);
+
+ // // orange led on
+ // DDRB |= (1<<0);
+ // PORTB &= ~(1<<0);
+
+ matrix_init_user();
+};
+
+void shutdown_user(void) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_goodbye);
+ _delay_ms(150);
+ stop_all_notes();
+ #endif
+}
A keyboards/levinson/rev2/rev2.h => keyboards/levinson/rev2/rev2.h +60 -0
@@ 0,0 1,60 @@
+#ifndef REV2_H
+#define REV2_H
+
+#include "../levinson.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#ifndef FLIP_HALF
+// Standard Keymap
+// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
+#define KEYMAP( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05 }, \
+ { L10, L11, L12, L13, L14, L15 }, \
+ { L20, L21, L22, L23, L24, L25 }, \
+ { L30, L31, L32, L33, L34, L35 }, \
+ { R05, R04, R03, R02, R01, R00 }, \
+ { R15, R14, R13, R12, R11, R10 }, \
+ { R25, R24, R23, R22, R21, R20 }, \
+ { R35, R34, R33, R32, R31, R30 } \
+ }
+#else
+// Keymap with right side flipped
+// (TRRS jack on both halves are to the right)
+#define KEYMAP( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05 }, \
+ { L10, L11, L12, L13, L14, L15 }, \
+ { L20, L21, L22, L23, L24, L25 }, \
+ { L30, L31, L32, L33, L34, L35 }, \
+ { R00, R01, R02, R03, R04, R05 }, \
+ { R10, R11, R12, R13, R14, R15 }, \
+ { R20, R21, R22, R23, R24, R25 }, \
+ { R30, R31, R32, R33, R34, R35 } \
+ }
+#endif
+
+#endif
A keyboards/levinson/rev2/rules.mk => keyboards/levinson/rev2/rules.mk +1 -0
@@ 0,0 1,1 @@
+BACKLIGHT_ENABLE = yes
M keyboards/levinson/rules.mk => keyboards/levinson/rules.mk +1 -1
@@ 77,4 77,4 @@ CUSTOM_MATRIX = yes
LAYOUTS = ortho_4x12
-DEFAULT_FOLDER = levinson/rev1>
\ No newline at end of file
+DEFAULT_FOLDER = levinson/rev2