A keyboards/themadnoodle/noodlepad/config.h => keyboards/themadnoodle/noodlepad/config.h +6 -0
@@ 0,0 1,6 @@
+// Copyright 2023 Jesse Leventhal (@The=Mad-Noodle)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL + 5<
\ No newline at end of file
M keyboards/themadnoodle/noodlepad/info.json => keyboards/themadnoodle/noodlepad/info.json +50 -57
@@ 1,59 1,52 @@
{
- "keyboard_name": "Noodle Pad v1",
- "manufacturer": "The Mad Noodle",
- "url": "instagram.com/the_mad_noodle",
- "maintainer": "The-Mad-Noodle",
- "usb": {
- "vid": "0xFEED",
- "pid": "0x1701",
- "device_version": "0.0.1"
- },
- "matrix_pins": {
- "cols": ["B4", "B5", "B6"],
- "rows": ["D4", "D6", "D7"]
- },
- "diode_direction": "ROW2COL",
- "encoder": {
- "rotary": [
- {"pin_a": "D0", "pin_b": "D1"}
- ]
- },
- "rgblight": {
- "led_count": 4,
- "sleep": true,
- "animations": {
- "breathing": true,
- "rainbow_mood": true,
- "rainbow_swirl": true,
- "snake": true,
- "knight": true,
- "christmas": true,
- "static_gradient": true,
- "rgb_test": true,
- "alternating": true,
- "twinkle": true
- }
- },
- "ws2812": {
- "pin": "B7"
- },
- "processor": "atmega32u4",
- "bootloader": "atmel-dfu",
- "layouts": {
- "LAYOUT_ortho_3x3": {
- "layout": [
- {"matrix": [0, 0], "x": 0, "y": 0},
- {"matrix": [0, 1], "x": 1, "y": 0},
- {"matrix": [0, 2], "x": 2, "y": 0},
+ "manufacturer": "The Mad Noodle",
+ "keyboard_name": "NoodlePad",
+ "maintainer": "The-Mad-Noodle",
+ "url": "https://www.madnoodleprototypes.com/",
+ "bootloader": "atmel-dfu",
+ "processor": "atmega32u4",
+ "diode_direction": "ROW2COL",
+ "features": {
+ "bootmagic": true,
+ "command": false,
+ "console": false,
+ "extrakey": true,
+ "mousekey": true,
+ "nkro": true,
+ "rgblight": true,
+ "encoder": true
+ },
+ "rgblight": {
+ "hue_steps": 10,
+ "led_count": 4,
+ "sleep": true,
+ "animations": {
+ "breathing": true,
+ "rainbow_mood": true,
+ "rainbow_swirl": true,
+ "snake": true,
+ "knight": true,
+ "christmas": true,
+ "static_gradient": true,
+ "rgb_test": true,
+ "alternating": true,
+ "twinkle": true
+ }
+ },
+ "layouts": {
+ "LAYOUT_ortho_3x3": {
+ "layout": [
+ {"x":0, "y":0, "matrix": [0,0]},
+ {"label":"Encoder", "x":1, "y":0, "matrix": [0,1]},
+ {"x":2, "y":0, "matrix": [0,2]},
+ {"x":0, "y":1, "matrix": [1,0]},
+ {"x":1, "y":1, "matrix": [1,1]},
+ {"x":2, "y":1, "matrix": [1,2]},
+ {"x":0, "y":2, "matrix": [2,0]},
+ {"x":1, "y":2, "matrix": [2,1]},
+ {"x":2, "y":2, "matrix": [2,2]}
+ ]
+ }
+ },
- {"matrix": [1, 0], "x": 0, "y": 1},
- {"matrix": [1, 1], "x": 1, "y": 1},
- {"matrix": [1, 2], "x": 2, "y": 1},
-
- {"matrix": [2, 0], "x": 0, "y": 2},
- {"matrix": [2, 1], "x": 1, "y": 2},
- {"matrix": [2, 2], "x": 2, "y": 2}
- ]
- }
- }
-}
+}<
\ No newline at end of file
M keyboards/themadnoodle/noodlepad/keymaps/default/keymap.c => keyboards/themadnoodle/noodlepad/keymaps/default/keymap.c +47 -46
@@ 1,10 1,13 @@
+// Copyright 2023 The Mad Noodle(@the_mad_noodle)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* LAYER 0
- * ,-----------------------.
- * | << | MUTE | >> | ENCODER - PRESS (MUTE) / KNOB (VOLUME CONTROL)
+ * ,-------|ENCODER|-------.
+ * | << | MUTE | >> |
* |-------+-------+-------|
* | STOP | PLAY | MEDIA |
* |-------+-------+-------|
@@ 13,72 16,70 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[0] = LAYOUT_ortho_3x3(
- KC_MPRV, LT(2, KC_MUTE), KC_MNXT,
+ KC_MPRV, LT(2, KC_MUTE), KC_MNXT,
KC_MSTP, KC_MPLY, KC_MSEL,
KC_CALC, KC_MAIL, LT(1, KC_MYCM)
),
/* LAYER 1
- * ,-----------------------.
- * | MODE+ |RGB TOG| MODE- | ENCODER - PRESS (NA) / KNOB (Hue Control)
+ * ,-------|ENCODER|-------.
+ * | MODE+ |RGB TOG| MODE- |
* |-------+-------+-------|
- * | SPD- | SPD+ |Bright |
+ * |Bright-| PLAIN |Bright+|
* |-------+-------+-------|
- * | SAT+ | SAT- | |
+ * | SWIRL |BREATH | |
* `-----------------------'
*/
-
+
[1] = LAYOUT_ortho_3x3(
- RGB_MOD, RGB_TOG, RGB_RMOD,
- RGB_SPI, RGB_SPD, RGB_VAI,
- RGB_SAI, RGB_SAD, KC_TRNS
+ RGB_MOD, RGB_TOG, RGB_RMOD,
+ RGB_VAD, RGB_M_P, RGB_VAI,
+ LT(3,RGB_M_SW), RGB_M_B, KC_TRNS
),
-
- /* LAYER 2 (ENCODER)
- * ,-----------------------.
- * | | | | ENCODER - PRESS (NA) / KNOB (Arrow Left/Right)
+
+ /* LAYER 2
+ * ,-------|ENCODER|-------.
+ * | | | |
* |-------+-------+-------|
* | | | |
* |-------+-------+-------|
* | | | |
* `-----------------------'
*/
-
+
[2] = LAYOUT_ortho_3x3(
- KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+
+ /* LAYER 3
+ * ,-------|ENCODER|-------.
+ * | | | |
+ * |-------+-------+-------|
+ * | | | |
+ * |-------+-------+-------|
+ * | | | |
+ * `-----------------------'
+ */
+
+ [3] = LAYOUT_ortho_3x3(
+ KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
)
};
-bool encoder_update_user(uint8_t index, bool clockwise) {
-
- switch (get_highest_layer(layer_state)) {
- case 1:
- if (clockwise) {
- rgblight_increase_hue();
- } else {
- rgblight_decrease_hue();
- }
- break;
- case 2:
- if (clockwise) {
- tap_code(KC_RGHT);
- } else {
- tap_code(KC_LEFT);
- }
- break;
- default:
- if (clockwise) {
- tap_code(KC_VOLU);
- } else {
- tap_code(KC_VOLD);
- }
- break;
-
- }
- return true;
-}
+/*Encoder Mapping*/
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+ [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+ [1] = { ENCODER_CCW_CW(RGB_HUD, RGB_HUI) },
+ [2] = { ENCODER_CCW_CW(KC_LEFT, KC_RGHT) },
+ [3] = { ENCODER_CCW_CW(RGB_SAD, RGB_SAI) },
+};
+#endif
A keyboards/themadnoodle/noodlepad/keymaps/default/rules.mk => keyboards/themadnoodle/noodlepad/keymaps/default/rules.mk +1 -0
@@ 0,0 1,1 @@
+ENCODER_MAP_ENABLE = yes<
\ No newline at end of file
A keyboards/themadnoodle/noodlepad/keymaps/via/keymap.c => keyboards/themadnoodle/noodlepad/keymaps/via/keymap.c +85 -0
@@ 0,0 1,85 @@
+// Copyright 2023 The Mad Noodle(@the_mad_noodle)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* LAYER 0
+ * ,-------|ENCODER|-------.
+ * | << | MUTE | >> |
+ * |-------+-------+-------|
+ * | STOP | PLAY | MEDIA |
+ * |-------+-------+-------|
+ * | CALC | MY PC | TO(3) |
+ * `-----------------------'
+ */
+
+ [0] = LAYOUT_ortho_3x3(
+ KC_MPRV, KC_MUTE, KC_MNXT,
+ KC_MSTP, KC_MPLY, KC_MSEL,
+ KC_CALC, KC_MYCM, TO(3)
+ ),
+
+
+ /* LAYER 1
+ * ,-------|ENCODER|-------.
+ * | MODE+ |RGB TOG| MODE- |
+ * |-------+-------+-------|
+ * |Bright-| PLAIN |Bright+|
+ * |-------+-------+-------|
+ * | SWIRL |BREATH | TO(0) |
+ * `-----------------------'
+ */
+
+ [1] = LAYOUT_ortho_3x3(
+ RGB_MOD, RGB_TOG, RGB_RMOD,
+ RGB_VAD, RGB_M_P, RGB_VAI,
+ RGB_M_SW, RGB_M_B, TO(0)
+ ),
+
+
+ /* LAYER 2
+ * ,-------|ENCODER|-------.
+ * | | | |
+ * |-------+-------+-------|
+ * | | | |
+ * |-------+-------+-------|
+ * | | | TO(0) |
+ * `-----------------------'
+ */
+
+ [2] = LAYOUT_ortho_3x3(
+ KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, TO(0)
+ ),
+
+
+ /* LAYER 3
+ * ,-------|ENCODER|-------.
+ * | | | |
+ * |-------+-------+-------|
+ * | TO(1) | | TO(2) |
+ * |-------+-------+-------|
+ * | | | TO(0) |
+ * `-----------------------'
+ */
+
+ [3] = LAYOUT_ortho_3x3(
+ KC_TRNS, KC_TRNS, KC_TRNS,
+ TO(1), KC_TRNS, TO(2),
+ KC_TRNS, KC_TRNS, TO(0)
+ )
+
+};
+
+/*Encoder Mapping*/
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+ [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU)},
+ [1] = { ENCODER_CCW_CW(RGB_HUD, RGB_HUI)},
+ [2] = { ENCODER_CCW_CW(RGB_SAD, RGB_SAI)},
+ [3] = { ENCODER_CCW_CW(KC_UP, KC_DOWN)},
+};
+#endif
A keyboards/themadnoodle/noodlepad/keymaps/via/rules.mk => keyboards/themadnoodle/noodlepad/keymaps/via/rules.mk +2 -0
@@ 0,0 1,2 @@
+ENCODER_MAP_ENABLE = yes
+VIA_ENABLE = yes<
\ No newline at end of file
D keyboards/themadnoodle/noodlepad/readme.md => keyboards/themadnoodle/noodlepad/readme.md +0 -17
@@ 1,17 0,0 @@
-# Noodle Pad v1 Keypad with Encoder
-
-
-
-
-The Noodle Pad by The Mad Noodle Prototypes is a custom 3x3 mechanical keypad with an encoder knob and full RGB Underglow.
-
-* Keyboard Maintainer: [The Mad Noodle Prototypes](https://github.com/The-Mad-Noodle)
-* Hardware Supported: NoodlePad PCB, ATmega32U4
-* Hardware Availability: [MadNoodlePrototypes.com](https://www.madnoodleprototypes.com/shop)
-
-Make example for this keyboard (after setting up your build environment):
-
- make themadnoodle/noodlepad:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
-Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
M keyboards/themadnoodle/noodlepad/rules.mk => keyboards/themadnoodle/noodlepad/rules.mk +3 -14
@@ 1,14 1,3 @@
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
-AUDIO_ENABLE = no # Audio output
-UNICODE_ENABLE = yes # Unicode
-ENCODER_ENABLE = yes
+# Default folder for noodlepad
+DEFAULT_FOLDER = themadnoodle/noodlepad/v1
+
A keyboards/themadnoodle/noodlepad/v1/info.json => keyboards/themadnoodle/noodlepad/v1/info.json +25 -0
@@ 0,0 1,25 @@
+{
+ "manufacturer": "The Mad Noodle",
+ "keyboard_name": "NoodlePad v1",
+ "maintainer": "The-Mad-Noodle",
+ "url": "https://www.madnoodleprototypes.com/",
+ "ws2812": {
+ "pin": "B7"
+ },
+ "matrix_pins": {
+ "rows": ["D4", "D6", "D7"],
+ "cols": ["B4", "B5", "B6"]
+ },
+ "processor": "atmega32u4",
+ "usb": {
+ "device_version": "1.0.0",
+ "pid": "0x0001",
+ "vid": "0x6A6C"
+ },
+ "encoder": {
+ "rotary": [
+ { "pin_a": "D0", "pin_b": "D1" }
+ ]
+
+ }
+}<
\ No newline at end of file
A keyboards/themadnoodle/noodlepad/v1/readme.md => keyboards/themadnoodle/noodlepad/v1/readme.md +27 -0
@@ 0,0 1,27 @@
+# NoodlePad v.1
+
+
+
+The Noodlepad v.1 is a 8 key macro keypad with a push button encoder knob.
+
+* Keyboard Maintainer: [The Mad Noodle](https://github.com/The-Mad-Noodle)
+* Hardware Supported: NoodlePad v.1 PCB
+* Hardware Availability: https://www.madnoodleprototypes.com/shop
+
+
+Compile example for this keyboard (after setting up your build environment):
+
+ qmk compile -kb themadnoodle/noodlepad/v1 -km default
+
+Flashing example for this keyboard:
+
+ qmk flash -kb themadnoodle/noodlepad/v1 -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader & Flashing
+
+
+**Physical reset button**:
+
+* Press the physical button located on the top left of the back of the PCB (Labeled RST) to enter Bootloader Mode
A keyboards/themadnoodle/noodlepad/v1/rules.mk => keyboards/themadnoodle/noodlepad/v1/rules.mk +1 -0
@@ 0,0 1,1 @@
+#this file was left intentionally blank
A keyboards/themadnoodle/noodlepad/v2/info.json => keyboards/themadnoodle/noodlepad/v2/info.json +24 -0
@@ 0,0 1,24 @@
+{
+ "manufacturer": "The Mad Noodle",
+ "keyboard_name": "NoodlePad v2",
+ "maintainer": "The-Mad-Noodle",
+ "url": "https://www.madnoodleprototypes.com/",
+ "ws2812": {
+ "pin": "B7"
+ },
+ "matrix_pins": {
+ "cols": ["F0", "B5", "B6"],
+ "rows": ["F1", "D6", "D7"]
+ },
+ "usb": {
+ "device_version": "2.0.0",
+ "pid": "0x0002",
+ "vid": "0x6A6C"
+ },
+ "encoder": {
+ "rotary": [
+ { "pin_a": "D0", "pin_b": "D1" }
+ ]
+
+ }
+}<
\ No newline at end of file
A keyboards/themadnoodle/noodlepad/v2/readme.md => keyboards/themadnoodle/noodlepad/v2/readme.md +27 -0
@@ 0,0 1,27 @@
+# NoodlePad v.2
+
+
+
+The Noodlepad v.2 is a 8 hotswap key macro keypad with a push button encoder knob.
+
+* Keyboard Maintainer: [The Mad Noodle](https://github.com/The-Mad-Noodle)
+* Hardware Supported: NoodlePad v.2 PCB
+* Hardware Availability: https://www.madnoodleprototypes.com/shop
+
+
+Compile example for this keyboard (after setting up your build environment):
+
+ qmk compile -kb themadnoodle/noodlepad/v2 -km default
+
+Flashing example for this keyboard:
+
+ qmk flash -kb themadnoodle/noodlepad/v2 -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader & Flashing
+
+
+**Physical reset button**:
+
+* Press the physical button located on the top left of the back of the PCB (Labeled RST) to enter Bootloader Mode
A keyboards/themadnoodle/noodlepad/v2/rules.mk => keyboards/themadnoodle/noodlepad/v2/rules.mk +1 -0
@@ 0,0 1,1 @@
+#this file was left intentionally blank