A keyboards/reviung53/config.h => keyboards/reviung53/config.h +138 -0
@@ 0,0 1,138 @@
+// Copyright 2021 gtips (@gtips)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4E94
+#define PRODUCT_ID 0x4E09
+#define DEVICE_VER 0x0001
+#define MANUFACTURER gtips
+#define PRODUCT reviung53
+
+/* key matrix size */
+#define MATRIX_ROWS 7
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D0, D4, C6, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0
+
+//#define LED_NUM_LOCK_PIN B0
+//#define LED_CAPS_LOCK_PIN B1
+//#define LED_SCROLL_LOCK_PIN B2
+//#define LED_COMPOSE_PIN B3
+//#define LED_KANA_PIN B4
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+#define RGBLED_NUM 10
+#define RGBLIGHT_HUE_STEP 16
+#define RGBLIGHT_SAT_STEP 16
+#define RGBLIGHT_VAL_STEP 16
+#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+#define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//# define RGBLIGHT_EFFECT_BREATHING
+//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//# define RGBLIGHT_EFFECT_SNAKE
+//# define RGBLIGHT_EFFECT_KNIGHT
+//# define RGBLIGHT_EFFECT_CHRISTMAS
+//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//# define RGBLIGHT_EFFECT_RGB_TEST
+//# define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
A keyboards/reviung53/info.json => keyboards/reviung53/info.json +68 -0
@@ 0,0 1,68 @@
+{
+ "keyboard_name": "reviung53",
+ "url": "",
+ "maintainer": "gtips",
+ "layouts": {
+ "LAYOUT_reviung53": {
+ "layout": [
+ {"label": "k02", "x":2.25, "y":0},
+ {"label": "k03", "x":3.5, "y":0},
+ {"label": "k04", "x":4.5, "y":0},
+ {"label": "k05", "x":5.5, "y":0},
+ {"label": "k06", "x":6.5, "y":0},
+ {"label": "k07", "x":7.75, "y":0},
+ {"label": "k40", "x":8.75, "y":0},
+ {"label": "k41", "x":9.75, "y":0},
+ {"label": "k42", "x":10.75, "y":0},
+ {"label": "k43", "x":12, "y":0},
+
+ {"label": "k10", "x":0, "y":1.25, "w":1.5},
+ {"label": "k11", "x":1.5, "y":1.25},
+ {"label": "k12", "x":2.5, "y":1.25},
+ {"label": "k13", "x":3.5, "y":1.25},
+ {"label": "k14", "x":4.5, "y":1.25},
+ {"label": "k15", "x":5.5, "y":1.25},
+ {"label": "k16", "x":6.5, "y":1.25},
+ {"label": "k17", "x":7.5, "y":1.25},
+ {"label": "k44", "x":8.5, "y":1.25},
+ {"label": "k45", "x":9.5, "y":1.25},
+ {"label": "k46", "x":10.5, "y":1.25},
+ {"label": "k47", "x":11.5, "y":1.25, "w":1.5},
+
+ {"label": "k20", "x":0, "y":2.25, "w":1.75},
+ {"label": "k21", "x":1.75, "y":2.25},
+ {"label": "k22", "x":2.75, "y":2.25},
+ {"label": "k23", "x":3.75, "y":2.25},
+ {"label": "k24", "x":4.75, "y":2.25},
+ {"label": "k25", "x":5.75, "y":2.25},
+ {"label": "k26", "x":6.75, "y":2.25},
+ {"label": "k27", "x":7.75, "y":2.25},
+ {"label": "k50", "x":8.75, "y":2.25},
+ {"label": "k51", "x":9.75, "y":2.25},
+ {"label": "k52", "x":10.75, "y":2.25},
+ {"label": "k53", "x":11.75, "y":2.25, "w":1.25},
+
+ {"label": "k30", "x":0, "y":3.25, "w":2.25},
+ {"label": "k31", "x":2.25, "y":3.25},
+ {"label": "k32", "x":3.25, "y":3.25},
+ {"label": "k33", "x":4.25, "y":3.25},
+ {"label": "k34", "x":5.25, "y":3.25},
+ {"label": "k35", "x":6.25, "y":3.25},
+ {"label": "k36", "x":7.25, "y":3.25},
+ {"label": "k37", "x":8.25, "y":3.25},
+ {"label": "k54", "x":9.25, "y":3.25},
+ {"label": "k55", "x":10.25, "y":3.25},
+ {"label": "k56", "x":11.25, "y":3.25, "w":1.75},
+
+ {"label": "k60", "x":0, "y":4.25, "w":1.5},
+ {"label": "k61", "x":1.5, "y":4.25, "w":1.25},
+ {"label": "k62", "x":2.75, "y":4.25, "w":1.25},
+ {"label": "k63", "x":4, "y":4.25, "w":2.75},
+ {"label": "k64", "x":6.75, "y":4.25, "w":2.25},
+ {"label": "k65", "x":9, "y":4.25, "w":1.25},
+ {"label": "k66", "x":10.25, "y":4.25, "w":1.25},
+ {"label": "k67", "x":11.5, "y":4.25, "w":1.5}
+ ]
+ }
+ }
+}
A keyboards/reviung53/keymaps/default/keymap.c => keyboards/reviung53/keymaps/default/keymap.c +55 -0
@@ 0,0 1,55 @@
+// Copyright 2021 gtips (@gtips)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _BASE,
+ _LOWER,
+ _RAISE,
+ _ADJUST
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define ADJUST MO(_ADJUST)
+
+#define SF_SS RSFT_T(KC_SLSH)
+#define SP_LO LT(LOWER, KC_SPC)
+#define SP_RA LT(RAISE, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BASE] = LAYOUT_reviung53(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, SF_SS,
+ KC_LCTL, KC_LGUI, KC_LALT, SP_LO, SP_RA, KC_LALT, KC_RGUI, KC_RCTL
+ ),
+ [_LOWER] = LAYOUT_reviung53(
+ KC_GESC, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_PAUS, KC_SLCK, KC_PSCR, _______,
+ _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+ _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, KC_QUOT,
+ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_SLSH,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [_RAISE] = LAYOUT_reviung53(
+ KC_TILD, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLU, KC_VOLD, KC_MPLY, _______,
+ _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
+ _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DQUO,
+ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_QUES,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [_ADJUST] = LAYOUT_reviung53(
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,
+ RGB_VAI, RGB_SAI, RGB_HUI, RGB_MOD, XXXXXXX, RGB_TOG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ RGB_VAD, RGB_SAD, RGB_HUD, RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX
+ ),
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+ return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
A keyboards/reviung53/keymaps/default/readme.md => keyboards/reviung53/keymaps/default/readme.md +1 -0
@@ 0,0 1,1 @@
+# The default keymap for reviung53
A keyboards/reviung53/keymaps/via/keymap.c => keyboards/reviung53/keymaps/via/keymap.c +55 -0
@@ 0,0 1,55 @@
+// Copyright 2021 gtips (@gtips)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _BASE,
+ _LOWER,
+ _RAISE,
+ _ADJUST
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define ADJUST MO(_ADJUST)
+
+#define SF_SS RSFT_T(KC_SLSH)
+#define SP_LO LT(LOWER, KC_SPC)
+#define SP_RA LT(RAISE, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BASE] = LAYOUT_reviung53(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, SF_SS,
+ KC_LCTL, KC_LGUI, KC_LALT, SP_LO, SP_RA, KC_LALT, KC_RGUI, KC_RCTL
+ ),
+ [_LOWER] = LAYOUT_reviung53(
+ KC_GESC, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_PAUS, KC_SLCK, KC_PSCR, _______,
+ _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+ _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, KC_QUOT,
+ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_SLSH,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [_RAISE] = LAYOUT_reviung53(
+ KC_TILD, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLU, KC_VOLD, KC_MPLY, _______,
+ _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
+ _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DQUO,
+ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_QUES,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [_ADJUST] = LAYOUT_reviung53(
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,
+ RGB_VAI, RGB_SAI, RGB_HUI, RGB_MOD, XXXXXXX, RGB_TOG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ RGB_VAD, RGB_SAD, RGB_HUD, RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX
+ ),
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+ return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
A keyboards/reviung53/keymaps/via/readme.md => keyboards/reviung53/keymaps/via/readme.md +3 -0
@@ 0,0 1,3 @@
+# The default keymap for reviung53
+
+For use with VIA configurator and compatible keymap editors. <
\ No newline at end of file
A keyboards/reviung53/keymaps/via/rules.mk => keyboards/reviung53/keymaps/via/rules.mk +1 -0
@@ 0,0 1,1 @@
+VIA_ENABLE = yes
A keyboards/reviung53/readme.md => keyboards/reviung53/readme.md +27 -0
@@ 0,0 1,27 @@
+# reviung53
+
+
+
+The REVIUNG53 is 53-key keyboard.
+
+* Keyboard Maintainer: [gtips](https://github.com/gtips)
+* Hardware Supported: REVIUNG53 PCB.
+* Hardware Availability: [PCB & Case Data](https://github.com/gtips/reviung/tree/master/reviung53)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make reviung53:default
+
+Flashing example for this keyboard:
+
+ make reviung53:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
A keyboards/reviung53/reviung53.c => keyboards/reviung53/reviung53.c +4 -0
@@ 0,0 1,4 @@
+// Copyright 2021 gtips (@gtips)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "reviung53.h"
A keyboards/reviung53/reviung53.h => keyboards/reviung53/reviung53.h +30 -0
@@ 0,0 1,30 @@
+// Copyright 2021 gtips (@gtips)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_reviung53( \
+ K02, K03, K04, K05, K06, K07, K40, K41, K42, K43, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K44, K45, K46, K47, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K50, K51, K52, K53, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K54, K55, K56,\
+ K60, K61, K62, K63, K64, K65, K66, K67 \
+) { \
+ { KC_NO, KC_NO, K02, K03, K04, K05, K06, K07 }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17 }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27 }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37 }, \
+ { K40, K41, K42, K43, K44, K45, K46, K47 }, \
+ { K50, K51, K52, K53, K54, K55, K56, KC_NO }, \
+ { K60, K61, K62, K63, K64, K65, K66, K67 } \
+}
A keyboards/reviung53/rules.mk => keyboards/reviung53/rules.mk +19 -0
@@ 0,0 1,19 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output