M keyboards/winkeyless/bface/README.md => keyboards/winkeyless/bface/README.md +3 -1
@@ 14,6 14,8 @@ Flashing
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
+**Reset Key:** Hold down the key located at K00, commonly programmed as left control while plugging in the keyboard.
+
Windows:
1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
2. Place your keyboard into reset.
@@ 33,7 35,7 @@ macOS:
3. Install the following packages:
```
brew install python
- brew install pyusb
+ pip3 install pyusb
brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
```
D keyboards/winkeyless/bface/backlight_ps2avrGB.c => keyboards/winkeyless/bface/backlight_ps2avrGB.c +0 -94
@@ 1,94 0,0 @@
-/* Copyright 2017 Sebastian Kaim
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifdef BACKLIGHT_ENABLE
-
-#include "backlight_ps2avrGB.h"
-#define sbi(reg,bit) reg |= (_BV(bit))
-#define cbi(reg,bit) reg &= (~_BV(bit))
-#define PWM10 WGM10
-#define PWM11 WGM11
-#define COM1x1 COM1B1
-#define OCR1x OCR1B
-
-void backlight_init_ports(void)
-{
-#if BACKLIGHT_ON_STATE == 0
- backlight_off();
-#else
- backlight_on();
-#endif
-
- // setup pwm
- // this bitmagic is sourced from the original firmware
- /*TCCR1B = ((TCCR1B & ~0x07) | 0x03);
- TCNT1H = 0;
- TCNT1L = 0;
- sbi(TIMSK, TOIE1);
- OCR1BH = 0;
- OCR1BL = 0;
- cbi(TCCR1A,PWM11);
- sbi(TCCR1A,PWM10);
- sbi(TCCR1A,COM1B1);
- cbi(TCCR1A,COM1B0);*/
- ICR1 = 0xFFFF;
-
- TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
- TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
-
- backlight_init();
-}
-
-void backlight_set(uint8_t level)
-{
- if( level == 0 ) {
- backlight_off();
- }
- else {
- backlight_on();
- /*uint8_t pwm = get_pwm_for_brightness(level);
- set_backlight_pwm(pwm);
- TCCR1A |= _BV(COM1x1);
- OCR1x = (level >= 2) ? 0xFFFF : 0x00FF;*/
- }
-}
-
-#define PWM_MAX 0xFF
-uint8_t get_pwm_for_brightness(uint8_t level)
-{
- // we need to cast up here to allow multiplication with 0xFF. We could also use floats, but this is probably a lot faster.
- uint16_t brightness = (uint16_t)level * (uint16_t)PWM_MAX / (uint16_t)BACKLIGHT_LEVELS;
- return (uint8_t)brightness;
-}
-
-void backlight_on(void)
-{
- //_SFR_IO8(0x12) |= _BV(0x4);
- LED_PIN |= BACKLIGHT_PORT_NUM;
-}
-
-void backlight_off(void)
-{
- //_SFR_IO8(0x12) &= ~_BV(0x4);
- LED_PIN &= ~BACKLIGHT_PORT_NUM;
-}
-
-void set_backlight_pwm(uint8_t level) {
- // this does not work (yet)
- //OCR1B = level;
-}
-
-#endif // BACKLIGHT_ENABLE
D keyboards/winkeyless/bface/backlight_ps2avrGB.h => keyboards/winkeyless/bface/backlight_ps2avrGB.h +0 -35
@@ 1,35 0,0 @@
-/* Copyright 2017 Sebastian Kaim
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-
-#if defined(__AVR__)
-#include <avr/pgmspace.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#endif
-#include <stddef.h>
-#include <stdlib.h>
-#include "backlight.h"
-
-#ifndef PS2AVRGB_BACKLIGHT_H
-#define PS2AVRGB_BACKLIGHT_H
-
-uint8_t get_pwm_for_brightness(uint8_t level);
-void set_backlight_pwm(uint8_t level);
-void backlight_on(void);
-void backlight_off(void);
-
-#endif
M keyboards/winkeyless/bface/bface.c => keyboards/winkeyless/bface/bface.c +68 -26
@@ 1,30 1,23 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-Copyright 2018 Sebastian Kaim <sebb@sebb767.de>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "bface.h"
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
#include "rgblight.h"
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
+#include "i2c_master.h"
#include "quantum.h"
+#ifdef RGBLIGHT_ENABLE
extern rgblight_config_t rgblight_config;
void rgblight_set(void) {
@@ 37,10 30,59 @@ void rgblight_set(void) {
}
i2c_init();
- i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+ i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+}
+#endif
+
+void matrix_init_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+ if (rgblight_config.enable) {
+ i2c_init();
+ i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+ }
+#endif
+ // call user level keymaps, if any
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+ rgblight_task();
+#endif
+ matrix_scan_user();
+ /* Nothing else for now. */
}
__attribute__ ((weak))
void matrix_scan_user(void) {
- rgblight_task();
+}
+
+void backlight_init_ports(void) {
+ // initialize pins D0, D1, D4 and D6 as output
+ setPinOutput(D0);
+ setPinOutput(D1);
+ setPinOutput(D4);
+ setPinOutput(D6);
+
+ // turn backlight LEDs on
+ writePinHigh(D0);
+ writePinHigh(D1);
+ writePinHigh(D4);
+ writePinHigh(D6);
+}
+
+void backlight_set(uint8_t level) {
+ if (level == 0) {
+ // turn backlight LEDs off
+ writePinLow(D0);
+ writePinLow(D1);
+ writePinLow(D4);
+ writePinLow(D6);
+ } else {
+ // turn backlight LEDs on
+ writePinHigh(D0);
+ writePinHigh(D1);
+ writePinHigh(D4);
+ writePinHigh(D6);
+ }
}
M keyboards/winkeyless/bface/bface.h => keyboards/winkeyless/bface/bface.h +4 -7
@@ 16,8 16,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef KEYMAP_COMMON_H
-#define KEYMAP_COMMON_H
+#pragma once
#include "quantum_keycodes.h"
#include "keycode.h"
@@ 27,8 26,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, \
K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, \
K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, \
- K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, \
- K00, K10, K20, K56, K57, KA0, KB0, KC0 \
+ K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, \
+ K00, K10, K20, K56, K57, KA0, KB0, KC0 \
){ \
{ K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KA0, KB0, KC0, KC_NO, KC_NO }, \
{ K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC_NO, KC_NO, KC_NO }, \
@@ 37,8 36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, K16, K26, K36, K46, K56, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB6, KC6, KD6, KE6 }, \
- { KC_NO, K17, K27, K37, K47, K57, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7, KC7, KD7, KE7 } \
+ { KC_NO, K17, K27, K37, K47, K57, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7, KC7, KD7, KE7 } \
}
-
-#endif
M keyboards/winkeyless/bface/config.h => keyboards/winkeyless/bface/config.h +6 -3
@@ 16,8 16,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
@@ 30,6 29,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 8
#define MATRIX_COLS 15
+// 0 1 2 3 4 5 6 7 8 9 A B C D E
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7}
+#define UNUSED_PINS
+
#define RGBLED_NUM 16
#define RGBLIGHT_ANIMATIONS
@@ 43,4 47,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_PORT_NUM (1 << 4)
#endif
-#endif
D keyboards/winkeyless/bface/i2c.c => keyboards/winkeyless/bface/i2c.c +0 -104
@@ 1,104 0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
- uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
- if (bitrate_div >= 16) {
- bitrate_div = (bitrate_div - 16) / 2;
- }
- TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
- // set pull-up resistors on I2C bus pins
- PORTC |= 0b11;
-
- i2c_set_bitrate(400);
-
- // enable TWI (two-wire interface)
- TWCR |= (1 << TWEN);
-
- // enable TWI interrupt and slave address ACK
- TWCR |= (1 << TWIE);
- TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
- // reset TWI control register
- TWCR = 0;
-
- // begin transmission and wait for it to end
- TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
- while (!(TWCR & (1<<TWINT)));
-
- // check if the start condition was successfully transmitted
- if ((TWSR & 0xF8) != TW_START) {
- return 1;
- }
-
- // transmit address and wait
- TWDR = address;
- TWCR = (1<<TWINT) | (1<<TWEN);
- while (!(TWCR & (1<<TWINT)));
-
- // check if the device has acknowledged the READ / WRITE mode
- uint8_t twst = TW_STATUS & 0xF8;
- if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
- return 1;
- }
-
- return 0;
-}
-
-void i2c_stop(void) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
- TWDR = data;
-
- // transmit data and wait
- TWCR = (1<<TWINT) | (1<<TWEN);
- while (!(TWCR & (1<<TWINT)));
-
- if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
- return 1;
- }
-
- return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
- if (i2c_start(address)) {
- return 1;
- }
-
- for (uint16_t i = 0; i < length; i++) {
- if (i2c_write(data[i])) {
- return 1;
- }
- }
-
- i2c_stop();
-
- return 0;
-}
D keyboards/winkeyless/bface/i2c.h => keyboards/winkeyless/bface/i2c.h +0 -25
@@ 1,25 0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif
D keyboards/winkeyless/bface/matrix.c => keyboards/winkeyless/bface/matrix.c +0 -113
@@ 1,113 0,0 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/delay.h>
-
-#include "matrix.h"
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 5
-#endif
-
-static uint8_t debouncing = DEBOUNCE;
-
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-void matrix_init(void) {
- // all outputs for rows high
- DDRB = 0xFF;
- PORTB = 0xFF;
- // all inputs for columns
- DDRA = 0x00;
- DDRC &= ~(0x111111<<2);
- DDRD &= ~(1<<PIND7);
- // all columns are pulled-up
- PORTA = 0xFF;
- PORTC |= (0b111111<<2);
- PORTD |= (1<<PIND7);
-
- // initialize matrix state: all keys off
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- matrix[row] = 0x00;
- matrix_debouncing[row] = 0x00;
- }
-
- // activate backlight
- //PORTD |= (1 << 4);
- //_SFR_IO8(0x09) |= (1 << 4); //_BV(0x94 & 0xF);
- //
- // this is the code that *should* be executed in quantum.c
- _SFR_IO8(0x12) |= _BV(0x4);
-}
-
-void matrix_set_row_status(uint8_t row) {
- DDRB = (1 << row);
- PORTB = ~(1 << row);
-}
-
-uint8_t bit_reverse(uint8_t x) {
- x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
- x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
- x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
- return x;
-}
-
-uint8_t matrix_scan(void) {
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- matrix_set_row_status(row);
- _delay_us(5);
-
- matrix_row_t cols = (
- // cols 0..7, PORTA 0 -> 7
- (~PINA) & 0xFF
- ) | (
- // cols 8..13, PORTC 7 -> 0
- bit_reverse((~PINC) & 0xFF) << 8
- ) | (
- // col 14, PORTD 7
- ((~PIND) & (1 << PIND7)) << 7
- );
-
- if (matrix_debouncing[row] != cols) {
- matrix_debouncing[row] = cols;
- debouncing = DEBOUNCE;
- }
- }
-
- if (debouncing) {
- if (--debouncing) {
- _delay_ms(1);
- } else {
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = matrix_debouncing[i];
- }
- }
- }
-
- matrix_scan_user();
-
- return 1;
-}
-
-inline matrix_row_t matrix_get_row(uint8_t row) {
- return matrix[row];
-}
-
-void matrix_print(void) {
-}
M keyboards/winkeyless/bface/rules.mk => keyboards/winkeyless/bface/rules.mk +2 -3
@@ 25,7 25,7 @@ NO_SUSPEND_POWER_DOWN = yes
F_CPU = 12000000
# build options
-BOOTMAGIC_ENABLE = yes
+BOOTMAGIC_ENABLE = no
MOUSEKEY_ENABLE = yes
EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = no
@@ 40,8 40,7 @@ OPT_DEFS = -DDEBUG_LEVEL=0
OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup
-CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c backlight_ps2avrGB.c
+SRC = i2c_master.c
# programming options
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
M keyboards/winkeyless/bface/usbconfig.h => keyboards/winkeyless/bface/usbconfig.h +1 -4
@@ 8,8 8,7 @@
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
*/
-#ifndef __usbconfig_h_included__
-#define __usbconfig_h_included__
+#pragma once
#include "config.h"
@@ 392,5 391,3 @@ section at the end of this file).
/* #define USB_INTR_PENDING EIFR */
#define USB_INTR_PENDING_BIT INTF1
#define USB_INTR_VECTOR INT1_vect
-
-#endif /* __usbconfig_h_included__ */