82 files changed, 181 insertions(+), 196 deletions(-)

M keyboards/basekeys/trifecta/config.h
M keyboards/bm40hsrgb/config.h
M keyboards/bm68rgb/keymaps/peepeetee/config.h
M keyboards/boardsource/the_mark/config.h
M keyboards/crkbd/keymaps/devdev/config.h
M keyboards/crkbd/keymaps/gotham/config.h
M keyboards/crkbd/keymaps/kidbrazil/config.h
M keyboards/crkbd/keymaps/rpbaptist/config.h
M keyboards/crkbd/keymaps/soundmonster/config.h
M keyboards/crkbd/readme.md
M keyboards/dztech/dz60rgb/v1/config.h
M keyboards/dztech/dz60rgb/v2/config.h
M keyboards/dztech/dz60rgb_ansi/v1/config.h
M keyboards/dztech/dz60rgb_ansi/v2/config.h
M keyboards/dztech/dz60rgb_wkl/v1/config.h
M keyboards/dztech/dz60rgb_wkl/v2/config.h
M keyboards/dztech/dz65rgb/v1/config.h
M keyboards/dztech/dz65rgb/v2/config.h
M keyboards/ergodox_ez/config.h
M keyboards/ergodox_ez/keymaps/hacker_dvorak/config.h
M keyboards/geekboards/macropad_v2/config.h
M keyboards/geekboards/tester/config.h
M keyboards/handwired/colorlice/config.h
M keyboards/handwired/hnah40rgb/config.h
M keyboards/handwired/p65rgb/config.h
M keyboards/helix/rev3_4rows/config.h
M keyboards/helix/rev3_5rows/config.h
M keyboards/hs60/v1/config.h
M keyboards/kbdfans/bella/rgb/config.h
M keyboards/kbdfans/bella/rgb_iso/config.h
M keyboards/kbdfans/kbd67/mkiirgb/v1/config.h
M keyboards/kbdfans/kbd67/mkiirgb/v2/config.h
M keyboards/kbdfans/kbdmini/config.h
M keyboards/kbdfans/maja/config.h
M keyboards/latin17rgb/config.h
M keyboards/latin60rgb/config.h
M keyboards/le_chiffre/config.h
M keyboards/marksard/rhymestone/rev1/config.h
M keyboards/massdrop/alt/keymaps/pregame/config.h
M keyboards/massdrop/alt/keymaps/urbanvanilla/config.h
M keyboards/massdrop/ctrl/keymaps/endgame/config.h
M keyboards/massdrop/ctrl/keymaps/matthewrobo/config.h
M keyboards/mechlovin/adelais/rgb_led/rev1/config.h
M keyboards/mechlovin/adelais/rgb_led/rev2/config.h
M keyboards/mechlovin/delphine/rgb_led/config.h
M keyboards/mechlovin/hannah60rgb/rev1/config.h
M keyboards/mechlovin/hannah60rgb/rev2/config.h
M keyboards/mechlovin/infinity87/rgb_rev1/config.h
M keyboards/melgeek/mj61/config.h
M keyboards/melgeek/mj63/config.h
M keyboards/melgeek/mj64/config.h
M keyboards/melgeek/mj65/config.h
M keyboards/melgeek/mojo75/config.h
M keyboards/melgeek/z70ultra/config.h
M keyboards/miller/gm862/config.h
M keyboards/monstargear/xo87/rgb/config.h
M keyboards/moonlander/config.h
M keyboards/naked48/keymaps/salicylic/config.h
M keyboards/opendeck/32/rev1/config.h
M keyboards/percent/canoe_gen2/config.h
M keyboards/phase_studio/titan65/config.h
M keyboards/planck/ez/config.h
M keyboards/planck/rev6/config.h
M keyboards/setta21/keymaps/salicylic/config.h
M keyboards/sofle/keymaps/devdev/config.h
M keyboards/sofle/keymaps/rgb_default/config.h
M keyboards/terrazzo/config.h
M keyboards/tkc/portico/config.h
M keyboards/xbows/nature/config.h
M keyboards/xbows/woody/config.h
M keyboards/yncognito/batpad/config.h
M layouts/community/ortho_4x12/bocaj/config.h
M layouts/community/ortho_4x12/drashna/config.h
M layouts/community/split_3x6_3/drashna/config.h
M quantum/led_matrix.c
M quantum/rgb_matrix.c
M users/bcat/config.h
M users/bocaj/config.h
M users/curry/config.h
M users/drashna/config.h
M users/spidey3/config.h
M users/tominabox1/config.h

@@ 80,11 80,11 @@
 #   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-//#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+//#   define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. 
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 #    define RGB_MATRIX_HUE_STEP 8
 #    define RGB_MATRIX_SAT_STEP 8
 #    define RGB_MATRIX_VAL_STEP 8

@@ 51,5 51,5 @@
     #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 #endif
 #ifdef RGB_MATRIX_ENABLE
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #endif

@@ 64,7 64,7 @@
 // #define RGBLIGHT_SAT_STEP 25        // Units to step when in/decreasing saturation
 // #define RGBLIGHT_VAL_STEP 12        // Units to step when in/decreasing value (brightness)
 // #define RGB_DISABLE_AFTER_TIMEOUT 0   // number of ticks to wait until disabling effects
-// #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 // #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 // #define RGBLIGHT_ANIMATIONS             // Run RGB animations

@@ 59,7 59,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DRIVER_LED_TOTAL 24 // Number of LEDs
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
 #    ifndef RGB_DISABLE_WHEN_USB_SUSPENDED
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    endif
 #endif
 

@@ 32,7 32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define CUSTOM_FONT
 
-#define CUSTOM_LAYER_READ //if you remove this it causes issues - needs better guarding 
+#define CUSTOM_LAYER_READ //if you remove this it causes issues - needs better guarding
 
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 200


@@ 43,7 43,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef RGBLIGHT_ENABLE
     #undef RGBLED_NUM
-	
+
     //#define RGBLIGHT_ANIMATIONS
 	#define RGBLIGHT_EFFECT_BREATHING
 	#define RGBLIGHT_EFFECT_RAINBOW_MOOD


@@ 55,11 55,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 	//#define RGBLIGHT_EFFECT_RGB_TEST
 	//#define RGBLIGHT_EFFECT_ALTERNATING
 	//#define RGBLIGHT_EFFECT_TWINKLE
-	
+
     //#define RGBLED_NUM 54
 	//#define RGBLED_SPLIT 27
-	//#define RGBLED_SPLIT { 27, 27 } // haven't figured out how to use this yet 
-	
+	//#define RGBLED_SPLIT { 27, 27 } // haven't figured out how to use this yet
+
 	#define RGBLED_NUM 27
     #define RGBLIGHT_LIMIT_VAL 120
     #define RGBLIGHT_HUE_STEP 10


@@ 71,11 71,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. 
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT
 

@@ 39,7 39,7 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_MATRIX_KEYPRESSES                // reacts to keypresses
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150    // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 #    define RGB_MATRIX_HUE_STEP 32
 #    define RGB_MATRIX_SAT_STEP 64

@@ 56,7 56,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     //#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
     // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
     // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-    #define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+    #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
     #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
     // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
     // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)

@@ 42,7 42,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define NO_ACTION_ONESHOT
 
 #ifdef RGB_MATRIX_ENABLE
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
 
 #    define RGB_MATRIX_HUE_STEP 8

@@ 59,11 59,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
-#   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. 
+#   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 #   define RGB_MATRIX_HUE_STEP 8
 #   define RGB_MATRIX_SAT_STEP 8
 #   define RGB_MATRIX_VAL_STEP 8

@@ 38,7 38,7 @@ And in your `config.h` file, add the following:
 #   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)

@@ 37,7 37,7 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #    define RGB_MATRIX_LED_FLUSH_LIMIT 26

@@ 37,7 37,7 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN

@@ 37,7 37,7 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #    define RGB_MATRIX_LED_FLUSH_LIMIT 26

@@ 37,7 37,7 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN

@@ 37,7 37,7 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #    define RGB_MATRIX_LED_FLUSH_LIMIT 26

@@ 37,7 37,7 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN

@@ 36,9 36,9 @@
 #    define RGB_MATRIX_LED_FLUSH_LIMIT 26
 #    define DEBOUNCE 3
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
-#    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN	
+#    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
 #    define DISABLE_RGB_MATRIX_BAND_SAT
 #    define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
 #    define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT

@@ 36,7 36,7 @@
 #    define RGB_MATRIX_LED_FLUSH_LIMIT 26
 #    define DEBOUNCE 3
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
 #    define DISABLE_RGB_MATRIX_BAND_SAT

@@ 129,7 129,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_MATRIX_LED_PROCESS_LIMIT 5
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
 
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
 
 // #define RGBLIGHT_COLOR_LAYER_0 0x00, 0x00, 0xFF
 /* #define RGBLIGHT_COLOR_LAYER_1 0x00, 0x00, 0xFF */

@@ 14,7 14,7 @@
 #undef  IGNORE_MOD_TAP_INTERRUPT
 #define IGNORE_MOD_TAP_INTERRUPT
 
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
 
 #undef  FORCE_NKRO
 #define FORCE_NKRO

@@ 41,7 41,7 @@
 #define WS2812_DMA_CHANNEL 3
 
 #ifdef RGB_MATRIX_ENABLE
-#define RGB_MATRIX_KEYPRESSES 
+#define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define DISABLE_RGB_MATRIX_ALPHAS_MODS
 #define DISABLE_RGB_MATRIX_BAND_SAT


@@ 67,7 67,7 @@
 #define RGB_MATRIX_STARTUP_SPD 30
 #endif //RGB_MATRIX_ENABLE
 
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define WAIT_FOR_USB
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */

@@ 24,7 24,7 @@
 #define DEBOUNCE 3
 #ifdef RGB_MATRIX_ENABLE
 #define RGB_DISABLE_AFTER_TIMEOUT 0
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGB_MATRIX_KEYPRESSES
 #define DISABLE_RGB_MATRIX_SPLASH
 #define DISABLE_RGB_MATRIX_MULTISPLASH


@@ 36,4 36,4 @@
 #define DRIVER_1_LED_TOTAL 8
 #define DRIVER_2_LED_TOTAL 0
 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
-#endif>
\ No newline at end of file
+#endif

@@ 49,7 49,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* RGB LEDs */
 #define RGB_DI_PIN B1
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4

@@ 60,7 60,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set

@@ 40,7 40,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGB_DI_PIN B4
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4

@@ 68,7 68,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)

@@ 68,7 68,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)

@@ 118,7 118,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
 
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 215
 
 #define DRIVER_ADDR_1 0b1110100

@@ 37,7 37,7 @@
 /* disable these deprecated features by default */
 #ifdef RGB_MATRIX_ENABLE
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4

@@ 37,7 37,7 @@
 /* disable these deprecated features by default */
 #ifdef RGB_MATRIX_ENABLE
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4

@@ 16,9 16,9 @@
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
 #define DEBOUNCE 3
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
-#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN	
+#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
 #define DISABLE_RGB_MATRIX_BAND_SAT
 #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
 #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT

@@ 16,10 16,10 @@
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
 #define DEBOUNCE 3
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
-#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN	
+#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
 #define DISABLE_RGB_MATRIX_BAND_SAT
 #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
 #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT

@@ 35,7 35,7 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN

@@ 18,9 18,9 @@
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
 #define DEBOUNCE 3
 #define RGB_DISABLE_AFTER_TIMEOUT 0
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGB_MATRIX_KEYPRESSES
-#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN	
+#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
 #define DISABLE_RGB_MATRIX_BAND_SAT
 #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
 #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT

@@ 1,18 1,18 @@
  /* Copyright 2021 18438880
-  * 
-  * This program is free software: you can redistribute it and/or modify 
-  * it under the terms of the GNU General Public License as published by 
-  * the Free Software Foundation, either version 2 of the License, or 
-  * (at your option) any later version. 
-  * 
-  * This program is distributed in the hope that it will be useful, 
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
-  * GNU General Public License for more details. 
-  * 
-  * You should have received a copy of the GNU General Public License 
-  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
-  */ 
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
 
 #pragma once
 


@@ 56,7 56,7 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN


@@ 100,5 100,3 @@
 #define RGBLIGHT_VAL_STEP 5
 #define RGBLIGHT_SLEEP
 #endif
-
-

@@ 1,18 1,18 @@
  /* Copyright 2021 latincompass
-  * 
-  * This program is free software: you can redistribute it and/or modify 
-  * it under the terms of the GNU General Public License as published by 
-  * the Free Software Foundation, either version 2 of the License, or 
-  * (at your option) any later version. 
-  * 
-  * This program is distributed in the hope that it will be useful, 
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
-  * GNU General Public License for more details. 
-  * 
-  * You should have received a copy of the GNU General Public License 
-  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
-  */ 
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
 #pragma once
 
 /* USB Device descriptor parameter */


@@ 53,7 53,7 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN


@@ 77,4 77,3 @@
 #    define DRIVER_1_LED_TOTAL 60
 #    define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
 #endif
-

@@ 69,7 69,7 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 #define RGB_MATRIX_HUE_STEP 8

@@ 93,7 93,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
   // #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
   // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-  #define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+  #define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
   // #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
   // #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
   #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255

@@ 89,7 89,7 @@
 // #define RGBLIGHT_SAT_STEP 25        						// Units to step when in/decreasing saturation
 // #define RGBLIGHT_VAL_STEP 12        						// Units to step when in/decreasing value (brightness)
 // #define RGB_DISABLE_AFTER_TIMEOUT 0   					// number of ticks to wait until disabling effects
-// #define RGB_DISABLE_WHEN_USB_SUSPENDED false 			// turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED 			// turn off effects when suspended
 // #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #define RGB_MATRIX_LED_FLUSH_LIMIT 16 					// limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGBLIGHT_ANIMATIONS             					// Run RGB animations


@@ 103,7 103,7 @@
 // #define RGBLIGHT_EFFECT_RGB_TEST        					// Enable RGB test animation mode.
 // #define RGBLIGHT_EFFECT_SNAKE           					// Enable snake animation mode.
 // #define RGBLIGHT_EFFECT_STATIC_GRADIENT 					// Enable static gradient mode.
-	
+
 // #define RGBLIGHT_EFFECT_BREATHE_CENTER              		// If defined, used to calculate the curve for the breathing animation. Valid values are 1.0 to 2.7
 // #define RGBLIGHT_EFFECT_BREATHE_MAX 255             		// The maximum brightness for the breathing mode. Valid values are 1 to 255
 // #define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 1000     		// How long to wait between light changes for the "Christmas" animation, in milliseconds

@@ 24,4 24,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_MATRIX_LED_PROCESS_LIMIT 15
 #define RGB_MATRIX_LED_FLUSH_LIMIT 10
 
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended

@@ 49,7 49,7 @@
 // #define RGBLIGHT_SAT_STEP 25        // Units to step when in/decreasing saturation
 // #define RGBLIGHT_VAL_STEP 12        // Units to step when in/decreasing value (brightness)
 // #define RGB_DISABLE_AFTER_TIMEOUT 0   // number of ticks to wait until disabling effects
-// #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 // #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 // #define RGBLIGHT_ANIMATIONS             // Run RGB animations

@@ 67,7 67,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define RGBLIGHT_SAT_STEP 25        // Units to step when in/decreasing saturation
 // #define RGBLIGHT_VAL_STEP 12        // Units to step when in/decreasing value (brightness)
 // #define RGB_DISABLE_AFTER_TIMEOUT 0   // number of ticks to wait until disabling effects
-// #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 // #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 // #define RGBLIGHT_ANIMATIONS             // Run RGB animations

@@ 13,7 13,7 @@
 #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 220 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set>
\ No newline at end of file
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set

@@ 1,7 1,7 @@
 #pragma once
 
 #define PRODUCT_ID   0xAEC2
-#define PRODUCT      Adelais En Ciel Rev2  
+#define PRODUCT      Adelais En Ciel Rev2
 
 #define MATRIX_ROW_PINS { B1, A0, C13, A1, A2}
 #define MATRIX_COL_PINS { A10, A9, A8, B15, B14, B13, B12, B11, B10, B8, B4, B5, B3, C14, A7 }


@@ 31,7 31,7 @@
 #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set


@@ 42,4 42,4 @@
 #define ENCODERS_PAD_B { A3 }
 #define ENCODER_RESOLUTION 4
 
-#define TAP_CODE_DELAY 10>
\ No newline at end of file
+#define TAP_CODE_DELAY 10

@@ 24,7 24,7 @@
 //     #define RGBLIGHT_EFFECT_RGB_TEST
 //     #define RGBLIGHT_EFFECT_ALTERNATING
 #endif
- 
+
 //rgb matrix setting// This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
 // The address will vary depending on your wiring:


@@ 41,7 41,7 @@
 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set

@@ 11,8 11,8 @@
 #    define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
-#endif>
\ No newline at end of file
+#endif

@@ 30,11 30,11 @@
 #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
 
 #if defined(RGBLIGHT_ENABLE) && defined(RGB_MATRIX_ENABLE)
 #    define RGB_MATRIX_DISABLE_KEYCODES
-#endif>
\ No newline at end of file
+#endif

@@ 35,7 35,7 @@
 // 0b0110001 AD <-> SCL
 // 0b0110010 AD <-> SDA
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define DISABLE_RGB_MATRIX_SPLASH
 #define DISABLE_RGB_MATRIX_MULTISPLASH

@@ 37,7 37,7 @@
 #define NO_ACTION_FUNCTION
 
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26

@@ 37,7 37,7 @@
 #define NO_ACTION_FUNCTION
 
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26

@@ 37,7 37,7 @@
 #define NO_ACTION_FUNCTION
 
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26

@@ 37,7 37,7 @@
 #define NO_ACTION_FUNCTION
 
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26

@@ 37,7 37,7 @@
 #define NO_ACTION_FUNCTION
 
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26

@@ 36,7 36,7 @@
 #define NO_ACTION_FUNCTION
 
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26

@@ 36,10 36,10 @@
 #define DEBOUNCE 3
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN	
+#    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
 #    define DISABLE_RGB_MATRIX_BAND_SAT
 #    define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
 #    define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT

@@ 36,7 36,7 @@
 #define DIODE_DIRECTION ROW2COL
 #define RGB_DI_PIN D7
 #define DRIVER_LED_TOTAL 110
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
 
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 100 // limits maximum brightness of LEDs to 100 out of 255.
 #define RGBLIGHT_LIMIT_VAL 100 // limits maximum brightness of LEDs to 100 out of 255.

@@ 91,7 91,7 @@
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 175
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_KEYPRESSES
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
 
 #define MUSIC_MAP
 

@@ 31,7 31,7 @@
 #    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 // #   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255


@@ 41,4 41,3 @@
 #    define RGB_MATRIX_VAL_STEP 5
 #    define RGB_MATRIX_SPD_STEP 10
 #endif
-

@@ 38,7 38,7 @@
 #define DRIVER_COUNT 1
 #define DRIVER_1_LED_TOTAL (4 * 8 * 3)
 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL)
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_SPIRAL
 #define RGB_MATRIX_DISABLE_KEYCODES
 

@@ 64,4 64,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_MATRIX_STARTUP_SAT 255
 #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #define RGB_MATRIX_STARTUP_SPD 127
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#define RGB_DISABLE_WHEN_USB_SUSPENDED

@@ 47,5 47,5 @@
 #define RGB_DI_PIN E6
 #define DRIVER_LED_TOTAL 67
 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255

@@ 147,7 147,7 @@
 
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
 
 #define RGB_MATRIX_LED_PROCESS_LIMIT 5
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26

@@ 141,7 141,7 @@
 #define WS2812_DMA_CHANNEL 2
 
 #ifndef RGB_DISABLE_WHEN_USB_SUSPENDED
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED
 #endif
 
 #endif

@@ 27,7 27,7 @@
 #    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 // #   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255


@@ 37,4 37,3 @@
 #    define RGB_MATRIX_VAL_STEP 5
 #    define RGB_MATRIX_SPD_STEP 10
 #endif
-

@@ 1,18 1,18 @@
  /* Copyright 2021 Dane Evans
-  * 
-  * This program is free software: you can redistribute it and/or modify 
-  * it under the terms of the GNU General Public License as published by 
-  * the Free Software Foundation, either version 2 of the License, or 
-  * (at your option) any later version. 
-  * 
-  * This program is distributed in the hope that it will be useful, 
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
-  * GNU General Public License for more details. 
-  * 
-  * You should have received a copy of the GNU General Public License 
-  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
-*/  
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
   #pragma once
 
 


@@ 29,7 29,7 @@
 
 #define CUSTOM_FONT
 
-#define CUSTOM_LAYER_READ //if you remove this it causes issues - needs better guarding 
+#define CUSTOM_LAYER_READ //if you remove this it causes issues - needs better guarding
 
 
 #define TAPPING_FORCE_HOLD


@@ 56,7 56,7 @@
 
 #ifdef RGBLIGHT_ENABLE
     #undef RGBLED_NUM
-	
+
     //#define RGBLIGHT_ANIMATIONS
 	//#define RGBLIGHT_EFFECT_BREATHING
 	#define RGBLIGHT_EFFECT_RAINBOW_MOOD


@@ 68,11 68,11 @@
 	//#define RGBLIGHT_EFFECT_RGB_TEST
 	//#define RGBLIGHT_EFFECT_ALTERNATING
 	//#define RGBLIGHT_EFFECT_TWINKLE
-	
+
     #define RGBLED_NUM 70
 	//#define RGBLED_SPLIT
-	#define RGBLED_SPLIT { 35, 35 } // haven't figured out how to use this yet 
-	
+	#define RGBLED_SPLIT { 35, 35 } // haven't figured out how to use this yet
+
 	//#define RGBLED_NUM 30
     #define RGBLIGHT_LIMIT_VAL 120
     #define RGBLIGHT_HUE_STEP 10


@@ 84,11 84,11 @@
 #   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. 
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT
 


@@ 127,4 127,4 @@
 // #   define DISABLE_RGB_MATRIX_MULTISPLASH
 // #   define DISABLE_RGB_MATRIX_SOLID_SPLASH
 // #   define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
-#endif>
\ No newline at end of file
+#endif

@@ 1,18 1,18 @@
  /* Copyright 2021 Dane Evans
-  * 
-  * This program is free software: you can redistribute it and/or modify 
-  * it under the terms of the GNU General Public License as published by 
-  * the Free Software Foundation, either version 2 of the License, or 
-  * (at your option) any later version. 
-  * 
-  * This program is distributed in the hope that it will be useful, 
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
-  * GNU General Public License for more details. 
-  * 
-  * You should have received a copy of the GNU General Public License 
-  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
-*/  
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
   #pragma once
 
 


@@ 29,7 29,7 @@
 
 #define CUSTOM_FONT
 
-#define CUSTOM_LAYER_READ //if you remove this it causes issues - needs better guarding 
+#define CUSTOM_LAYER_READ //if you remove this it causes issues - needs better guarding
 
 
 #define TAPPING_FORCE_HOLD


@@ 56,7 56,7 @@
 
 #ifdef RGBLIGHT_ENABLE
     #undef RGBLED_NUM
-	
+
     //#define RGBLIGHT_ANIMATIONS
 	//#define RGBLIGHT_EFFECT_BREATHING
 	#define RGBLIGHT_EFFECT_RAINBOW_MOOD


@@ 68,11 68,11 @@
 	//#define RGBLIGHT_EFFECT_RGB_TEST
 	//#define RGBLIGHT_EFFECT_ALTERNATING
 	//#define RGBLIGHT_EFFECT_TWINKLE
-	
+
     #define RGBLED_NUM 70
 	//#define RGBLED_SPLIT
-	#define RGBLED_SPLIT { 35, 35 } // haven't figured out how to use this yet 
-	
+	#define RGBLED_SPLIT { 35, 35 } // haven't figured out how to use this yet
+
 	//#define RGBLED_NUM 30
     #define RGBLIGHT_LIMIT_VAL 120
     #define RGBLIGHT_HUE_STEP 10


@@ 84,11 84,11 @@
 #   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. 
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT
 


@@ 127,4 127,4 @@
 // #   define DISABLE_RGB_MATRIX_MULTISPLASH
 // #   define DISABLE_RGB_MATRIX_SOLID_SPLASH
 // #   define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
-#endif>
\ No newline at end of file
+#endif

@@ 83,13 83,13 @@ so there is only one configuration. */
 
 #ifdef LED_MATRIX_ENABLE
 
-#define LED_DRIVER_ADDR_1 0x74 
+#define LED_DRIVER_ADDR_1 0x74
 #define LED_DRIVER_COUNT 1
 #define DRIVER_LED_TOTAL 105
 #define LED_MATRIX_ROWS 15
 #define LED_MATRIX_COLS 7
 #define LED_MATRIX_MAXIMUM_BRIGHTNESS 20
-#define LED_DISABLE_WHEN_USB_SUSPENDED true
+#define LED_DISABLE_WHEN_USB_SUSPENDED
 
 #define DISABLE_LED_MATRIX_ALPHAS_MODS
 #define DISABLE_LED_MATRIX_BREATHING

@@ 45,7 45,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGB_MATRIX_LED_FLUSH_LIMIT 26
 #    define DEBOUNCE 3
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
 #    define DISABLE_RGB_MATRIX_BAND_SAT

@@ 35,7 35,7 @@
 #    define RGB_MATRIX_LED_PROCESS_LIMIT 18
 #    define RGB_MATRIX_LED_FLUSH_LIMIT 16
 #    define RGB_DISABLE_AFTER_TIMEOUT 0          // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
 #    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN

@@ 16,10 16,10 @@
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
 #define DEBOUNCE 3
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN	
+#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
 #define DISABLE_RGB_MATRIX_BAND_SAT
 #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
 #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT


@@ 40,4 40,4 @@
 #define DRIVER_1_LED_TOTAL 35
 #define DRIVER_2_LED_TOTAL 32
 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
-#endif>
\ No newline at end of file
+#endif

@@ 47,13 47,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGB_DI_PIN B5
 #define DRIVER_LED_TOTAL 8
-#define RGB_MATRIX_KEYPRESSES 
-#define RGB_MATRIX_KEYRELEASES 
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_KEYRELEASES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#define RGB_DISABLE_AFTER_TIMEOUT 0 
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false 
-#define RGB_MATRIX_LED_FLUSH_LIMIT 16 
-#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 
+#define RGB_DISABLE_AFTER_TIMEOUT 0
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED
+#define RGB_MATRIX_LED_FLUSH_LIMIT 16
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
-
-        

@@ 24,7 24,7 @@
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
 // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
 #    undef RGB_MATRIX_LED_PROCESS_LIMIT
 #    undef RGB_MATRIX_LED_FLUSH_LIMIT
 #endif

@@ 37,7 37,7 @@
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
 // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
 #    undef RGB_MATRIX_LED_PROCESS_LIMIT
 #    undef RGB_MATRIX_LED_FLUSH_LIMIT
 #    ifdef KEYBOARD_planck_rev6

@@ 47,7 47,7 @@
 #    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255

@@ 67,10 67,6 @@ const led_point_t k_led_matrix_center = LED_MATRIX_CENTER;
 #    define LED_DISABLE_TIMEOUT 0
 #endif
 
-#if LED_DISABLE_WHEN_USB_SUSPENDED != 1
-#    undef LED_DISABLE_WHEN_USB_SUSPENDED
-#endif
-
 #if !defined(LED_MATRIX_MAXIMUM_BRIGHTNESS) || LED_MATRIX_MAXIMUM_BRIGHTNESS > UINT8_MAX
 #    undef LED_MATRIX_MAXIMUM_BRIGHTNESS
 #    define LED_MATRIX_MAXIMUM_BRIGHTNESS UINT8_MAX

@@ 67,10 67,6 @@ __attribute__((weak)) RGB rgb_matrix_hsv_to_rgb(HSV hsv) { return hsv_to_rgb(hsv
 #    define RGB_DISABLE_TIMEOUT 0
 #endif
 
-#if RGB_DISABLE_WHEN_USB_SUSPENDED != 1
-#    undef RGB_DISABLE_WHEN_USB_SUSPENDED
-#endif
-
 #if !defined(RGB_MATRIX_MAXIMUM_BRIGHTNESS) || RGB_MATRIX_MAXIMUM_BRIGHTNESS > UINT8_MAX
 #    undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS UINT8_MAX

@@ 33,7 33,7 @@
 
 #if defined(RGB_MATRIX_ENABLE)
 /* Turn off per-key RGB when the host goes to sleep. */
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED
 
 /* Keep per-key RGB increments consistent across keyboards. */
 #    undef RGB_MATRIX_HUE_STEP

@@ 28,7 28,7 @@
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
 // #   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 // #   define EECONFIG_RGB_MATRIX (uint32_t *)16
 

@@ 17,7 17,7 @@
 #if defined(RGB_MATRIX_ENABLE)
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED
 
 #    define DISABLE_RGB_MATRIX_ALPHAS_MODS
 #    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN

@@ 65,7 65,7 @@
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
 // #   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 // #   define EECONFIG_RGB_MATRIX (uint32_t *)16
 

@@ 1,7 1,7 @@
 #pragma once
 
-#define LED_DISABLE_WHEN_USB_SUSPENDED true
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#define LED_DISABLE_WHEN_USB_SUSPENDED
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGBLIGHT_LAYERS
 #define RGBLIGHT_MAX_LAYERS 17
 #define RGBLIGHT_LAYER_BLINK

@@ 31,7 31,7 @@
 // RGB_Matrix settings
 #ifdef RGB_MATRIX_ENABLE
   #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
-  #define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+  #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
   #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
   #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
   #define RGB_MATRIX_HUE_STEP 8