M keyboards/massdrop/alt/config_led.h => keyboards/massdrop/alt/config_led.h +18 -19
@@ 58,7 58,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//swr: Matrix wiring SW Red row (1-12)
//swg: Matrix wiring SW Green row (1-12)
//swb: Matrix wiring SW Blue row (1-12)
-//scan: Associated key scancode if any
+//scan: Associated key matrix scancode (set 255 if none or 254 for LED to turn off in alternating mode)
//Note: Origin 0,0 may be located anywhere as the software will do the final layout
#define ISSI3733_LED_MAP { \
{ .id = 1, .x = 0, .y = 0, .adr = { .drv = 2, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 0 }, \
@@ 129,46 129,45 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ .id = 66, .x = 10.5, .y = -3, .adr = { .drv = 1, .cs = 12, .swr = 8, .swg = 7, .swb = 9 }, .scan = 73 }, \
{ .id = 67, .x = 11.25, .y = -3, .adr = { .drv = 1, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 74 }, \
{ .id = 68, .x = -0.338, .y = -3.338, .adr = { .drv = 2, .cs = 11, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
- { .id = 69, .x = 0.39, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
+ { .id = 69, .x = 0.39, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 8, .swg = 7, .swb = 9 }, .scan = 254 }, \
{ .id = 70, .x = 1.263, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
- { .id = 71, .x = 2.135, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 71, .x = 2.135, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 72, .x = 3.008, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 73, .x = 3.88, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 73, .x = 3.88, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \
{ .id = 74, .x = 4.753, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
- { .id = 75, .x = 5.625, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
+ { .id = 75, .x = 5.625, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 254 }, \
{ .id = 76, .x = 6.497, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
- { .id = 77, .x = 7.37, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 77, .x = 7.37, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \
{ .id = 78, .x = 8.242, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 79, .x = 9.115, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 79, .x = 9.115, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 80, .x = 9.987, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
- { .id = 81, .x = 10.86, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 81, .x = 10.86, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \
{ .id = 82, .x = 11.588, .y = -3.338, .adr = { .drv = 1, .cs = 13, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
- { .id = 83, .x = 11.693, .y = -2.623, .adr = { .drv = 1, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
+ { .id = 83, .x = 11.693, .y = -2.623, .adr = { .drv = 1, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 254 }, \
{ .id = 84, .x = 11.693, .y = -1.873, .adr = { .drv = 1, .cs = 8, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
{ .id = 85, .x = 11.693, .y = -1.123, .adr = { .drv = 1, .cs = 8, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
- { .id = 86, .x = 11.693, .y = -0.373, .adr = { .drv = 1, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 86, .x = 11.693, .y = -0.373, .adr = { .drv = 1, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \
{ .id = 87, .x = 11.588, .y = 0.338, .adr = { .drv = 1, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
{ .id = 88, .x = 9.908, .y = 0.443, .adr = { .drv = 1, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 89, .x = 9.288, .y = 0.443, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 89, .x = 9.288, .y = 0.443, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 90, .x = 8.625, .y = 0.443, .adr = { .drv = 1, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 91, .x = 7.875, .y = 0.443, .adr = { .drv = 1, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 91, .x = 7.875, .y = 0.443, .adr = { .drv = 1, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 92, .x = 7.125, .y = 0.443, .adr = { .drv = 1, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 93, .x = 6.375, .y = 0.443, .adr = { .drv = 1, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 93, .x = 6.375, .y = 0.443, .adr = { .drv = 1, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 94, .x = 5.625, .y = 0.443, .adr = { .drv = 1, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 95, .x = 4.875, .y = 0.443, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 95, .x = 4.875, .y = 0.443, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 96, .x = 4.125, .y = 0.443, .adr = { .drv = 2, .cs = 7, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 97, .x = 3.375, .y = 0.443, .adr = { .drv = 2, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 97, .x = 3.375, .y = 0.443, .adr = { .drv = 2, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 98, .x = 2.625, .y = 0.443, .adr = { .drv = 2, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 99, .x = 1.875, .y = 0.443, .adr = { .drv = 2, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 99, .x = 1.875, .y = 0.443, .adr = { .drv = 2, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 100, .x = 1.125, .y = 0.443, .adr = { .drv = 2, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
{ .id = 101, .x = -0.338, .y = 0.338, .adr = { .drv = 2, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 102, .x = -0.443, .y = -0.373, .adr = { .drv = 2, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 102, .x = -0.443, .y = -0.373, .adr = { .drv = 2, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \
{ .id = 103, .x = -0.443, .y = -1.123, .adr = { .drv = 2, .cs = 1, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
{ .id = 104, .x = -0.443, .y = -1.873, .adr = { .drv = 2, .cs = 1, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
- { .id = 105, .x = -0.443, .y = -2.623, .adr = { .drv = 2, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
+ { .id = 105, .x = -0.443, .y = -2.623, .adr = { .drv = 2, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 254 }, \
};
-
#define USB_LED_INDICATOR_ENABLE //Comment out to disable indicator functionality
#ifdef USB_LED_INDICATOR_ENABLE //Scan codes refer to actual key matrix codes, not KC_* (255 to disable)
#define USB_LED_NUM_LOCK_SCANCODE 255
M keyboards/massdrop/alt/keymaps/default_md/keymap.c => keyboards/massdrop/alt/keymaps/default_md/keymap.c +82 -5
@@ 3,10 3,15 @@
enum alt_keycodes {
L_BRI = SAFE_RANGE, //LED Brightness Increase //Working
L_BRD, //LED Brightness Decrease //Working
+ L_EDG_I, //LED Edge Brightness Increase
+ L_EDG_D, //LED Edge Brightness Decrease
+ L_EDG_M, //LED Edge lighting mode
L_PTN, //LED Pattern Select Next //Working
L_PTP, //LED Pattern Select Previous //Working
L_PSI, //LED Pattern Speed Increase //Working
L_PSD, //LED Pattern Speed Decrease //Working
+ L_RATIOD,
+ L_RATIOI,
L_T_MD, //LED Toggle Mode //Working
L_T_ONF, //LED Toggle On / Off //Broken
L_ON, //LED On //Broken
@@ 18,6 23,7 @@ enum alt_keycodes {
DBG_MTRX, //DEBUG Toggle Matrix Prints //
DBG_KBD, //DEBUG Toggle Keyboard Prints //
DBG_MOU, //DEBUG Toggle Mouse Prints //
+ DBG_FAC, //DEBUG Factory light testing (All on white)
MD_BOOT //Restart into bootloader after hold timeout //Working
};
@@ 31,10 37,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[1] = LAYOUT(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \
- L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \
- L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \
- _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \
- _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \
+ L_T_BR, L_PSD, L_BRI, L_PSI, L_EDG_I, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \
+ L_T_PTD, L_PTP, L_BRD, L_PTN, L_EDG_D, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \
+ _______, L_T_MD, L_T_ONF, _______, L_EDG_M, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \
+ _______, _______, _______, DBG_FAC, _______, _______, KC_HOME, KC_PGDN, KC_END \
),
/*
[X] = LAYOUT(
@@ 53,6 59,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
static uint32_t key_timer;
+ static uint8_t scroll_effect = 0;
switch (keycode) {
case L_BRI:
@@ 69,6 76,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (led_animation_breathing) gcr_breathe = gcr_desired;
}
return false;
+ case L_EDG_M:
+ if (record->event.pressed) {
+ led_edge_mode++;
+ if (led_edge_mode > LED_EDGE_MODE_MAX) {
+ led_edge_mode = LED_EDGE_MODE_ALL;
+ }
+ }
+ return false;
+ case L_EDG_I:
+ if (record->event.pressed) {
+ led_edge_brightness += 0.1;
+ if (led_edge_brightness > 1) { led_edge_brightness = 1; }
+ }
+ return false;
+ case L_EDG_D:
+ if (record->event.pressed) {
+ led_edge_brightness -= 0.1;
+ if (led_edge_brightness < 0) { led_edge_brightness = 0; }
+ }
+ return false;
+ case L_RATIOI:
+ if (record->event.pressed) {
+ led_ratio_brightness += 0.2;
+ if (led_ratio_brightness > 2.0) { led_ratio_brightness = 2.0; }
+ }
+ return false;
+ case L_RATIOD:
+ if (record->event.pressed) {
+ led_ratio_brightness -= 0.2;
+ if (led_ratio_brightness < 0.0) { led_ratio_brightness = 0.0; }
+ }
+ return false;
case L_PTN:
if (record->event.pressed) {
if (led_animation_id == led_setups_count - 1) led_animation_id = 0;
@@ 128,7 167,33 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return false;
case L_T_PTD:
if (record->event.pressed) {
- led_animation_direction = !led_animation_direction;
+ scroll_effect++;
+ if (scroll_effect == 1) { //Patterns with scroll move horizontal (Right to left)
+ led_animation_direction = 1;
+ led_animation_orientation = 0;
+ led_animation_circular = 0;
+ } else if (scroll_effect == 2) { //Patterns with scroll move vertical (Top to bottom)
+ led_animation_direction = 1;
+ led_animation_orientation = 1;
+ led_animation_circular = 0;
+ } else if (scroll_effect == 3) { //Patterns with scroll move vertical (Bottom to top)
+ led_animation_direction = 0;
+ led_animation_orientation = 1;
+ led_animation_circular = 0;
+ } else if (scroll_effect == 4) { //Patterns with scroll explode from center
+ led_animation_direction = 0;
+ led_animation_orientation = 0;
+ led_animation_circular = 1;
+ } else if (scroll_effect == 5) { //Patterns with scroll implode on center
+ led_animation_direction = 1;
+ led_animation_orientation = 0;
+ led_animation_circular = 1;
+ } else { //Patterns with scroll move horizontal (Left to right)
+ scroll_effect = 0;
+ led_animation_direction = 0;
+ led_animation_orientation = 0;
+ led_animation_circular = 0;
+ }
}
return false;
case U_T_AGCR:
@@ 136,6 201,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode");
}
return false;
+ case DBG_FAC:
+ if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
+ led_lighting_mode = LED_MODE_NORMAL;
+ led_edge_brightness = 1;
+ led_edge_mode = LED_EDGE_MODE_ALL;
+ led_animation_breathing = 0;
+ led_animation_id = 7; //led_programs.c led_setups leds_white index
+ gcr_desired = LED_GCR_MAX;
+ led_enabled = 1;
+ I2C3733_Control_Set(led_enabled);
+ }
+ return false;
case DBG_TOG:
if (record->event.pressed) {
TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode");
M keyboards/massdrop/alt/keymaps/mac_md/keymap.c => keyboards/massdrop/alt/keymaps/mac_md/keymap.c +82 -5
@@ 3,10 3,15 @@
enum alt_keycodes {
L_BRI = SAFE_RANGE, //LED Brightness Increase //Working
L_BRD, //LED Brightness Decrease //Working
+ L_EDG_I, //LED Edge Brightness Increase
+ L_EDG_D, //LED Edge Brightness Decrease
+ L_EDG_M, //LED Edge lighting mode
L_PTN, //LED Pattern Select Next //Working
L_PTP, //LED Pattern Select Previous //Working
L_PSI, //LED Pattern Speed Increase //Working
L_PSD, //LED Pattern Speed Decrease //Working
+ L_RATIOD,
+ L_RATIOI,
L_T_MD, //LED Toggle Mode //Working
L_T_ONF, //LED Toggle On / Off //Broken
L_ON, //LED On //Broken
@@ 18,6 23,7 @@ enum alt_keycodes {
DBG_MTRX, //DEBUG Toggle Matrix Prints //
DBG_KBD, //DEBUG Toggle Keyboard Prints //
DBG_MOU, //DEBUG Toggle Mouse Prints //
+ DBG_FAC, //DEBUG Factory light testing (All on white)
MD_BOOT //Restart into bootloader after hold timeout //Working
};
@@ 31,10 37,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[1] = LAYOUT(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \
- L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \
- L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \
- _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \
- _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \
+ L_T_BR, L_PSD, L_BRI, L_PSI, L_EDG_I, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \
+ L_T_PTD, L_PTP, L_BRD, L_PTN, L_EDG_D, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \
+ _______, L_T_MD, L_T_ONF, _______, L_EDG_M, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \
+ _______, _______, _______, DBG_FAC, _______, _______, KC_HOME, KC_PGDN, KC_END \
),
/*
[X] = LAYOUT(
@@ 53,6 59,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
static uint32_t key_timer;
+ static uint8_t scroll_effect = 0;
switch (keycode) {
case L_BRI:
@@ 69,6 76,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (led_animation_breathing) gcr_breathe = gcr_desired;
}
return false;
+ case L_EDG_M:
+ if (record->event.pressed) {
+ led_edge_mode++;
+ if (led_edge_mode > LED_EDGE_MODE_MAX) {
+ led_edge_mode = LED_EDGE_MODE_ALL;
+ }
+ }
+ return false;
+ case L_EDG_I:
+ if (record->event.pressed) {
+ led_edge_brightness += 0.1;
+ if (led_edge_brightness > 1) { led_edge_brightness = 1; }
+ }
+ return false;
+ case L_EDG_D:
+ if (record->event.pressed) {
+ led_edge_brightness -= 0.1;
+ if (led_edge_brightness < 0) { led_edge_brightness = 0; }
+ }
+ return false;
+ case L_RATIOI:
+ if (record->event.pressed) {
+ led_ratio_brightness += 0.2;
+ if (led_ratio_brightness > 2.0) { led_ratio_brightness = 2.0; }
+ }
+ return false;
+ case L_RATIOD:
+ if (record->event.pressed) {
+ led_ratio_brightness -= 0.2;
+ if (led_ratio_brightness < 0.0) { led_ratio_brightness = 0.0; }
+ }
+ return false;
case L_PTN:
if (record->event.pressed) {
if (led_animation_id == led_setups_count - 1) led_animation_id = 0;
@@ 128,7 167,33 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return false;
case L_T_PTD:
if (record->event.pressed) {
- led_animation_direction = !led_animation_direction;
+ scroll_effect++;
+ if (scroll_effect == 1) { //Patterns with scroll move horizontal (Right to left)
+ led_animation_direction = 1;
+ led_animation_orientation = 0;
+ led_animation_circular = 0;
+ } else if (scroll_effect == 2) { //Patterns with scroll move vertical (Top to bottom)
+ led_animation_direction = 1;
+ led_animation_orientation = 1;
+ led_animation_circular = 0;
+ } else if (scroll_effect == 3) { //Patterns with scroll move vertical (Bottom to top)
+ led_animation_direction = 0;
+ led_animation_orientation = 1;
+ led_animation_circular = 0;
+ } else if (scroll_effect == 4) { //Patterns with scroll explode from center
+ led_animation_direction = 0;
+ led_animation_orientation = 0;
+ led_animation_circular = 1;
+ } else if (scroll_effect == 5) { //Patterns with scroll implode on center
+ led_animation_direction = 1;
+ led_animation_orientation = 0;
+ led_animation_circular = 1;
+ } else { //Patterns with scroll move horizontal (Left to right)
+ scroll_effect = 0;
+ led_animation_direction = 0;
+ led_animation_orientation = 0;
+ led_animation_circular = 0;
+ }
}
return false;
case U_T_AGCR:
@@ 136,6 201,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode");
}
return false;
+ case DBG_FAC:
+ if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
+ led_lighting_mode = LED_MODE_NORMAL;
+ led_edge_brightness = 1;
+ led_edge_mode = LED_EDGE_MODE_ALL;
+ led_animation_breathing = 0;
+ led_animation_id = 7; //led_programs.c led_setups leds_white index
+ gcr_desired = LED_GCR_MAX;
+ led_enabled = 1;
+ I2C3733_Control_Set(led_enabled);
+ }
+ return false;
case DBG_TOG:
if (record->event.pressed) {
TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode");
M keyboards/massdrop/ctrl/config_led.h => keyboards/massdrop/ctrl/config_led.h +17 -17
@@ 58,7 58,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//swr: Matrix wiring SW Red row (1-12)
//swg: Matrix wiring SW Green row (1-12)
//swb: Matrix wiring SW Blue row (1-12)
-//scan: Associated key scancode if any
+//scan: Associated key matrix scancode (set 255 if none or 254 for LED to turn off in alternating mode)
//Note: Origin 0,0 may be located anywhere as the software will do the final layout
#define ISSI3733_LED_MAP { \
{ .id = 1, .x = 0, .y = 0, .adr = { .drv = 2, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 0 }, \
@@ 149,37 149,37 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ .id = 86, .x = 12.375, .y = -4.125, .adr = { .drv = 1, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 85 }, \
{ .id = 87, .x = 13.125, .y = -4.125, .adr = { .drv = 1, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 86 }, \
{ .id = 88, .x = 13.433, .y = -4.43, .adr = { .drv = 1, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 89, .x = 12.285, .y = -4.535, .adr = { .drv = 1, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 89, .x = 12.285, .y = -4.535, .adr = { .drv = 1, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 90, .x = 11.14, .y = -4.535, .adr = { .drv = 1, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 91, .x = 9.995, .y = -4.535, .adr = { .drv = 1, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 91, .x = 9.995, .y = -4.535, .adr = { .drv = 1, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 92, .x = 8.85, .y = -4.535, .adr = { .drv = 1, .cs = 15, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 93, .x = 7.705, .y = -4.535, .adr = { .drv = 1, .cs = 16, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 93, .x = 7.705, .y = -4.535, .adr = { .drv = 1, .cs = 16, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 94, .x = 6.56, .y = -4.535, .adr = { .drv = 2, .cs = 9, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 95, .x = 5.415, .y = -4.535, .adr = { .drv = 2, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 95, .x = 5.415, .y = -4.535, .adr = { .drv = 2, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 96, .x = 4.27, .y = -4.535, .adr = { .drv = 2, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 97, .x = 3.125, .y = -4.535, .adr = { .drv = 2, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 97, .x = 3.125, .y = -4.535, .adr = { .drv = 2, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 98, .x = 1.98, .y = -4.535, .adr = { .drv = 2, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 99, .x = 0.835, .y = -4.535, .adr = { .drv = 2, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 99, .x = 0.835, .y = -4.535, .adr = { .drv = 2, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 100, .x = -0.307, .y = -4.43, .adr = { .drv = 2, .cs = 15, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 101, .x = -0.41, .y = -3.245, .adr = { .drv = 2, .cs = 15, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
+ { .id = 101, .x = -0.41, .y = -3.245, .adr = { .drv = 2, .cs = 15, .swr = 11, .swg = 10, .swb = 12 }, .scan = 254 }, \
{ .id = 102, .x = -0.41, .y = -2.06, .adr = { .drv = 2, .cs = 15, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
- { .id = 103, .x = -0.41, .y = -0.875, .adr = { .drv = 2, .cs = 15, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
+ { .id = 103, .x = -0.41, .y = -0.875, .adr = { .drv = 2, .cs = 15, .swr = 8, .swg = 7, .swb = 9 }, .scan = 254 }, \
{ .id = 104, .x = -0.308, .y = 0.31, .adr = { .drv = 2, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 105, .x = 0.835, .y = 0.415, .adr = { .drv = 2, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 105, .x = 0.835, .y = 0.415, .adr = { .drv = 2, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 106, .x = 1.98, .y = 0.415, .adr = { .drv = 2, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 107, .x = 3.125, .y = 0.415, .adr = { .drv = 2, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 107, .x = 3.125, .y = 0.415, .adr = { .drv = 2, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 108, .x = 4.27, .y = 0.415, .adr = { .drv = 2, .cs = 7, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 109, .x = 5.415, .y = 0.415, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 109, .x = 5.415, .y = 0.415, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 110, .x = 6.56, .y = 0.415, .adr = { .drv = 1, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 111, .x = 7.705, .y = 0.415, .adr = { .drv = 1, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 111, .x = 7.705, .y = 0.415, .adr = { .drv = 1, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 112, .x = 8.85, .y = 0.415, .adr = { .drv = 1, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 113, .x = 9.995, .y = 0.415, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 113, .x = 9.995, .y = 0.415, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 114, .x = 11.14, .y = 0.415, .adr = { .drv = 1, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 115, .x = 12.285, .y = 0.415, .adr = { .drv = 1, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 115, .x = 12.285, .y = 0.415, .adr = { .drv = 1, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \
{ .id = 116, .x = 13.432, .y = 0.31, .adr = { .drv = 1, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
- { .id = 117, .x = 13.535, .y = -0.875, .adr = { .drv = 1, .cs = 10, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
+ { .id = 117, .x = 13.535, .y = -0.875, .adr = { .drv = 1, .cs = 10, .swr = 8, .swg = 7, .swb = 9 }, .scan = 254 }, \
{ .id = 118, .x = 13.535, .y = -2.06, .adr = { .drv = 1, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
- { .id = 119, .x = 13.535, .y = -3.245, .adr = { .drv = 1, .cs = 10, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 119, .x = 13.535, .y = -3.245, .adr = { .drv = 1, .cs = 10, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \
};
#define USB_LED_INDICATOR_ENABLE //Comment out to disable indicator functionality
M keyboards/massdrop/ctrl/keymaps/default_md/keymap.c => keyboards/massdrop/ctrl/keymaps/default_md/keymap.c +84 -7
@@ 3,10 3,15 @@
enum ctrl_keycodes {
L_BRI = SAFE_RANGE, //LED Brightness Increase //Working
L_BRD, //LED Brightness Decrease //Working
+ L_EDG_I, //LED Edge Brightness Increase
+ L_EDG_D, //LED Edge Brightness Decrease
+ L_EDG_M, //LED Edge lighting mode
L_PTN, //LED Pattern Select Next //Working
L_PTP, //LED Pattern Select Previous //Working
L_PSI, //LED Pattern Speed Increase //Working
L_PSD, //LED Pattern Speed Decrease //Working
+ L_RATIOD,
+ L_RATIOI,
L_T_MD, //LED Toggle Mode //Working
L_T_ONF, //LED Toggle On / Off //Broken
L_ON, //LED On //Broken
@@ 18,6 23,7 @@ enum ctrl_keycodes {
DBG_MTRX, //DEBUG Toggle Matrix Prints //
DBG_KBD, //DEBUG Toggle Keyboard Prints //
DBG_MOU, //DEBUG Toggle Mouse Prints //
+ DBG_FAC, //DEBUG Factory light testing (All on white)
MD_BOOT //Restart into bootloader after hold timeout //Working
};
@@ 33,10 39,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[1] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \
- L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \
- L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+ L_T_BR, L_PSD, L_BRI, L_PSI, L_EDG_I, _______, _______, _______, U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \
+ L_T_PTD, L_PTP, L_BRD, L_PTN, L_EDG_D, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, L_T_MD, L_T_ONF, _______, L_EDG_M, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, DBG_FAC, _______, _______, _______, _______, _______, _______, _______ \
),
/*
[X] = LAYOUT(
@@ 56,6 62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
static uint32_t key_timer;
+ static uint8_t scroll_effect = 0;
switch (keycode) {
case L_BRI:
@@ 72,6 79,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (led_animation_breathing) gcr_breathe = gcr_desired;
}
return false;
+ case L_EDG_M:
+ if (record->event.pressed) {
+ led_edge_mode++;
+ if (led_edge_mode > LED_EDGE_MODE_MAX) {
+ led_edge_mode = LED_EDGE_MODE_ALL;
+ }
+ }
+ return false;
+ case L_EDG_I:
+ if (record->event.pressed) {
+ led_edge_brightness += 0.1;
+ if (led_edge_brightness > 1) { led_edge_brightness = 1; }
+ }
+ return false;
+ case L_EDG_D:
+ if (record->event.pressed) {
+ led_edge_brightness -= 0.1;
+ if (led_edge_brightness < 0) { led_edge_brightness = 0; }
+ }
+ return false;
+ case L_RATIOI:
+ if (record->event.pressed) {
+ led_ratio_brightness += 0.2;
+ if (led_ratio_brightness > 2.0) { led_ratio_brightness = 2.0; }
+ }
+ return false;
+ case L_RATIOD:
+ if (record->event.pressed) {
+ led_ratio_brightness -= 0.2;
+ if (led_ratio_brightness < 0.0) { led_ratio_brightness = 0.0; }
+ }
+ return false;
case L_PTN:
if (record->event.pressed) {
if (led_animation_id == led_setups_count - 1) led_animation_id = 0;
@@ 131,7 170,33 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return false;
case L_T_PTD:
if (record->event.pressed) {
- led_animation_direction = !led_animation_direction;
+ scroll_effect++;
+ if (scroll_effect == 1) { //Patterns with scroll move horizontal (Right to left)
+ led_animation_direction = 1;
+ led_animation_orientation = 0;
+ led_animation_circular = 0;
+ } else if (scroll_effect == 2) { //Patterns with scroll move vertical (Top to bottom)
+ led_animation_direction = 1;
+ led_animation_orientation = 1;
+ led_animation_circular = 0;
+ } else if (scroll_effect == 3) { //Patterns with scroll move vertical (Bottom to top)
+ led_animation_direction = 0;
+ led_animation_orientation = 1;
+ led_animation_circular = 0;
+ } else if (scroll_effect == 4) { //Patterns with scroll explode from center
+ led_animation_direction = 0;
+ led_animation_orientation = 0;
+ led_animation_circular = 1;
+ } else if (scroll_effect == 5) { //Patterns with scroll implode on center
+ led_animation_direction = 1;
+ led_animation_orientation = 0;
+ led_animation_circular = 1;
+ } else { //Patterns with scroll move horizontal (Left to right)
+ scroll_effect = 0;
+ led_animation_direction = 0;
+ led_animation_orientation = 0;
+ led_animation_circular = 0;
+ }
}
return false;
case U_T_AGCR:
@@ 139,6 204,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode");
}
return false;
+ case DBG_FAC:
+ if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
+ led_lighting_mode = LED_MODE_NORMAL;
+ led_edge_brightness = 1;
+ led_edge_mode = LED_EDGE_MODE_ALL;
+ led_animation_breathing = 0;
+ led_animation_id = 7; //led_programs.c led_setups leds_white index
+ gcr_desired = LED_GCR_MAX;
+ led_enabled = 1;
+ I2C3733_Control_Set(led_enabled);
+ }
+ return false;
case DBG_TOG:
if (record->event.pressed) {
TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode");
@@ 179,7 256,7 @@ led_instruction_t led_instructions[] = {
//Flags can be found in tmk_core/protocol/arm_atsam/md_rgb_matrix.h (prefixed with LED_FLAG_)
//LED IDs can be found in config_led.h in the keyboard's directory
//Examples are below
-
+
//All LEDs use the user's selected pattern (this is the factory default)
{ .flags = LED_FLAG_USE_ROTATE_PATTERN },
@@ 188,7 265,7 @@ led_instruction_t led_instructions[] = {
//Specific LEDs use specified RGB values while all others are off
// { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_RGB, .id0 = 0xFF, .id1 = 0x00FF, .id2 = 0x0000FF00, .id3 = 0xFF000000, .r = 75, .g = 150, .b = 225 },
-
+
//All LEDs use the user's selected pattern
//On layer 1, all key LEDs (except the top row which keeps active pattern) are red while all edge LEDs are green
//When layer 1 is active, key LEDs use red (id0 32 - 17: 1111 1111 1111 1111 0000 0000 0000 0000 = 0xFFFF0000) (except top row 16 - 1)
M keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c => keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c +82 -5
@@ 3,10 3,15 @@
enum ctrl_keycodes {
L_BRI = SAFE_RANGE, //LED Brightness Increase //Working
L_BRD, //LED Brightness Decrease //Working
+ L_EDG_I, //LED Edge Brightness Increase
+ L_EDG_D, //LED Edge Brightness Decrease
+ L_EDG_M, //LED Edge lighting mode
L_PTN, //LED Pattern Select Next //Working
L_PTP, //LED Pattern Select Previous //Working
L_PSI, //LED Pattern Speed Increase //Working
L_PSD, //LED Pattern Speed Decrease //Working
+ L_RATIOD,
+ L_RATIOI,
L_T_MD, //LED Toggle Mode //Working
L_T_ONF, //LED Toggle On / Off //Broken
L_ON, //LED On //Broken
@@ 18,6 23,7 @@ enum ctrl_keycodes {
DBG_MTRX, //DEBUG Toggle Matrix Prints //
DBG_KBD, //DEBUG Toggle Keyboard Prints //
DBG_MOU, //DEBUG Toggle Mouse Prints //
+ DBG_FAC, //DEBUG Factory light testing (All on white)
MD_BOOT //Restart into bootloader after hold timeout //Working
};
@@ 33,10 39,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[1] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \
- L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \
- L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+ L_T_BR, L_PSD, L_BRI, L_PSI, L_EDG_I, _______, _______, _______, U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \
+ L_T_PTD, L_PTP, L_BRD, L_PTN, L_EDG_D, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, L_T_MD, L_T_ONF, _______, L_EDG_M, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, DBG_FAC, _______, _______, _______, _______, _______, _______, _______ \
),
/*
[X] = LAYOUT(
@@ 64,6 70,7 @@ void matrix_scan_user(void) {
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
static uint32_t key_timer;
+ static uint8_t scroll_effect = 0;
switch (keycode) {
case L_BRI:
@@ 80,6 87,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (led_animation_breathing) gcr_breathe = gcr_desired;
}
return false;
+ case L_EDG_M:
+ if (record->event.pressed) {
+ led_edge_mode++;
+ if (led_edge_mode > LED_EDGE_MODE_MAX) {
+ led_edge_mode = LED_EDGE_MODE_ALL;
+ }
+ }
+ return false;
+ case L_EDG_I:
+ if (record->event.pressed) {
+ led_edge_brightness += 0.1;
+ if (led_edge_brightness > 1) { led_edge_brightness = 1; }
+ }
+ return false;
+ case L_EDG_D:
+ if (record->event.pressed) {
+ led_edge_brightness -= 0.1;
+ if (led_edge_brightness < 0) { led_edge_brightness = 0; }
+ }
+ return false;
+ case L_RATIOI:
+ if (record->event.pressed) {
+ led_ratio_brightness += 0.2;
+ if (led_ratio_brightness > 2.0) { led_ratio_brightness = 2.0; }
+ }
+ return false;
+ case L_RATIOD:
+ if (record->event.pressed) {
+ led_ratio_brightness -= 0.2;
+ if (led_ratio_brightness < 0.0) { led_ratio_brightness = 0.0; }
+ }
+ return false;
case L_PTN:
if (record->event.pressed) {
if (led_animation_id == led_setups_count - 1) led_animation_id = 0;
@@ 139,7 178,33 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return false;
case L_T_PTD:
if (record->event.pressed) {
- led_animation_direction = !led_animation_direction;
+ scroll_effect++;
+ if (scroll_effect == 1) { //Patterns with scroll move horizontal (Right to left)
+ led_animation_direction = 1;
+ led_animation_orientation = 0;
+ led_animation_circular = 0;
+ } else if (scroll_effect == 2) { //Patterns with scroll move vertical (Top to bottom)
+ led_animation_direction = 1;
+ led_animation_orientation = 1;
+ led_animation_circular = 0;
+ } else if (scroll_effect == 3) { //Patterns with scroll move vertical (Bottom to top)
+ led_animation_direction = 0;
+ led_animation_orientation = 1;
+ led_animation_circular = 0;
+ } else if (scroll_effect == 4) { //Patterns with scroll explode from center
+ led_animation_direction = 0;
+ led_animation_orientation = 0;
+ led_animation_circular = 1;
+ } else if (scroll_effect == 5) { //Patterns with scroll implode on center
+ led_animation_direction = 1;
+ led_animation_orientation = 0;
+ led_animation_circular = 1;
+ } else { //Patterns with scroll move horizontal (Left to right)
+ scroll_effect = 0;
+ led_animation_direction = 0;
+ led_animation_orientation = 0;
+ led_animation_circular = 0;
+ }
}
return false;
case U_T_AGCR:
@@ 147,6 212,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode");
}
return false;
+ case DBG_FAC:
+ if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
+ led_lighting_mode = LED_MODE_NORMAL;
+ led_edge_brightness = 1;
+ led_edge_mode = LED_EDGE_MODE_ALL;
+ led_animation_breathing = 0;
+ led_animation_id = 7; //led_programs.c led_setups leds_white index
+ gcr_desired = LED_GCR_MAX;
+ led_enabled = 1;
+ I2C3733_Control_Set(led_enabled);
+ }
+ return false;
case DBG_TOG:
if (record->event.pressed) {
TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode");
M tmk_core/protocol/arm_atsam/md_rgb_matrix.c => tmk_core/protocol/arm_atsam/md_rgb_matrix.c +44 -4
@@ 341,6 341,10 @@ uint8_t led_lighting_mode = LED_MODE_NORMAL;
uint8_t led_enabled = 1;
uint8_t led_animation_breathe_cur = BREATHE_MIN_STEP;
uint8_t breathe_dir = 1;
+uint8_t led_animation_circular = 0;
+float led_edge_brightness = 1.0f;
+float led_ratio_brightness = 1.0f;
+uint8_t led_edge_mode = LED_EDGE_MODE_ALL;
static void led_run_pattern(led_setup_t* f, float* ro, float* go, float* bo, float pos) {
float po;
@@ 398,16 402,32 @@ static void led_run_pattern(led_setup_t* f, float* ro, float* go, float* bo, flo
}
}
+# define RGB_MAX_DISTANCE 232.9635f
+
static void md_rgb_matrix_config_override(int i) {
float ro = 0;
float go = 0;
float bo = 0;
-
- float po = (led_animation_orientation) ? (float)g_led_config.point[i].y / 64.f * 100 : (float)g_led_config.point[i].x / 224.f * 100;
+ float po;
uint8_t highest_active_layer = biton32(layer_state);
- if (led_lighting_mode == LED_MODE_KEYS_ONLY && HAS_FLAGS(g_led_config.flags[i], LED_FLAG_UNDERGLOW)) {
+ if (led_animation_circular) {
+ // TODO: should use min/max values from LED configuration instead of
+ // hard-coded 224, 64
+ // po = sqrtf((powf(fabsf((disp.width / 2) - (led_cur->x - disp.left)), 2) + powf(fabsf((disp.height / 2) - (led_cur->y - disp.bottom)), 2))) / disp.max_distance * 100;
+ po = sqrtf((powf(fabsf((224 / 2) - (float)g_led_config.point[i].x), 2) + powf(fabsf((64 / 2) - (float)g_led_config.point[i].y), 2))) / RGB_MAX_DISTANCE * 100;
+ } else {
+ if (led_animation_orientation) {
+ po = (float)g_led_config.point[i].y / 64.f * 100;
+ } else {
+ po = (float)g_led_config.point[i].x / 224.f * 100;
+ }
+ }
+
+ if (led_edge_mode == LED_EDGE_MODE_ALTERNATE && LED_IS_EDGE_ALT(led_map[i].scan)) {
+ // Do not act on this LED (Edge alternate lighting mode)
+ } else if (led_lighting_mode == LED_MODE_KEYS_ONLY && HAS_FLAGS(g_led_config.flags[i], LED_FLAG_UNDERGLOW)) {
// Do not act on this LED
} else if (led_lighting_mode == LED_MODE_NON_KEYS_ONLY && !HAS_FLAGS(g_led_config.flags[i], LED_FLAG_UNDERGLOW)) {
// Do not act on this LED
@@ 465,10 485,30 @@ static void md_rgb_matrix_config_override(int i) {
}
}
+ // Adjust edge LED brightness
+ if (led_edge_brightness != 1 && LED_IS_EDGE(led_map[i].scan)) {
+ ro *= led_edge_brightness;
+ go *= led_edge_brightness;
+ bo *= led_edge_brightness;
+ }
+
+ // Adjust ratio of key vs. underglow (edge) LED brightness
+ if (LED_IS_EDGE(led_map[i].scan) && led_ratio_brightness > 1.0) {
+ // Decrease edge (underglow) LEDs
+ ro *= (2.0 - led_ratio_brightness);
+ go *= (2.0 - led_ratio_brightness);
+ bo *= (2.0 - led_ratio_brightness);
+ } else if (LED_IS_KEY(led_map[i].scan) && led_ratio_brightness < 1.0) {
+ // Decrease KEY LEDs
+ ro *= led_ratio_brightness;
+ go *= led_ratio_brightness;
+ bo *= led_ratio_brightness;
+ }
+
led_buffer[i].r = (uint8_t)ro;
led_buffer[i].g = (uint8_t)go;
led_buffer[i].b = (uint8_t)bo;
}
# endif // USE_MASSDROP_CONFIGURATOR
-#endif // RGB_MATRIX_ENABLE>
\ No newline at end of file
+#endif // RGB_MATRIX_ENABLE
M tmk_core/protocol/arm_atsam/md_rgb_matrix.h => tmk_core/protocol/arm_atsam/md_rgb_matrix.h +21 -0
@@ 128,6 128,8 @@ typedef struct led_instruction_s {
uint32_t id1; // Bitwise id, IDs 32-63
uint32_t id2; // Bitwise id, IDs 64-95
uint32_t id3; // Bitwise id, IDs 96-127
+ uint32_t id4; // Bitwise id, IDs 128-159
+ uint32_t id5; // Bitwise id, IDs 160-191
uint8_t layer;
uint8_t r;
uint8_t g;
@@ 146,6 148,11 @@ extern uint8_t led_enabled;
extern uint8_t led_animation_breathe_cur;
extern uint8_t led_animation_direction;
extern uint8_t breathe_dir;
+extern uint8_t led_animation_orientation;
+extern uint8_t led_animation_circular;
+extern float led_edge_brightness;
+extern float led_ratio_brightness;
+extern uint8_t led_edge_mode;
# define LED_MODE_NORMAL 0 // Must be 0
# define LED_MODE_KEYS_ONLY 1
@@ 153,6 160,20 @@ extern uint8_t breathe_dir;
# define LED_MODE_INDICATORS_ONLY 3
# define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY // Must be highest value
+# define LED_EDGE_MODE_ALL 0 // All edge LEDs are active (Must be 0)
+# define LED_EDGE_MODE_ALTERNATE 1 // Alternate mode of edge LEDs are active (Intention is for 'only every other edge LED' to be active)
+# define LED_EDGE_MODE_MAX LED_EDGE_MODE_ALTERNATE // Must be the highest valued LED edge mode
+
+# define LED_EDGE_FULL_MODE 255 // LEDs configured with this scan code will always be on for edge lighting modes
+# define LED_EDGE_ALT_MODE 254 // LEDs configured with this scan code will turn off in edge alternating mode
+# define LED_EDGE_MIN_SCAN 254 // LEDs configured with scan code >= to this are assigned as edge LEDs
+# define LED_INDICATOR_SCAN 253 // LEDs configured as dedicated indicators
+
+# define LED_IS_KEY(scan) (scan < LED_INDICATOR_SCAN) // Return true if an LED's scan value indicates it is a key LED
+# define LED_IS_EDGE(scan) (scan >= LED_EDGE_MIN_SCAN) // Return true if an LED's scan value indicates an edge LED
+# define LED_IS_EDGE_ALT(scan) (scan == LED_EDGE_ALT_MODE) // Return true if an LED's scan value indicates an alternate edge mode LED
+# define LED_IS_INDICATOR(scan) (scan == LED_INDICATOR_SCAN) // Return true if an LED's scan value indicates it is a dedicated Indicator
+
#endif // USE_MASSDROP_CONFIGURATOR
#endif //_LED_MATRIX_H_