5 files changed, 14 insertions(+), 10 deletions(-)

M bootloader.mk
M lib/python/qmk/constants.py
M quantum/config_common.h
M quantum/keymap.h
M quantum/mcu_selection.mk

@@ 35,30 35,30 @@
 ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
     OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
         BOOTLOADER_SIZE = 4096
     endif
-    ifeq ($(strip $(MCU)), at90usb1286)
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
         BOOTLOADER_SIZE = 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
     OPT_DEFS += -DBOOTLOADER_LUFA_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
         BOOTLOADER_SIZE = 4096
     endif
-    ifeq ($(strip $(MCU)), at90usb1286)
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
         BOOTLOADER_SIZE = 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
     OPT_DEFS += -DBOOTLOADER_QMK_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
         BOOTLOADER_SIZE = 4096
     endif
-    ifeq ($(strip $(MCU)), at90usb1286)
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
         BOOTLOADER_SIZE = 8192
     endif
 endif

@@ 10,6 10,6 @@ MAX_KEYBOARD_SUBFOLDERS = 5
 
 # Supported processor types
 ARM_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411'
-AVR_PROCESSORS = 'at90usb1286', 'at90usb646', 'atmega16u2', 'atmega328p', 'atmega32a', 'atmega32u2', 'atmega32u4', None
+AVR_PROCESSORS = 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', 'atmega328p', 'atmega32a', None
 ALL_PROCESSORS = ARM_PROCESSORS + AVR_PROCESSORS
 VUSB_PROCESSORS = 'atmega328p', 'atmega32a', 'atmega328', 'attiny85'

@@ 44,7 44,7 @@
 #        define PINB_ADDRESS 0x3
 #        define PINC_ADDRESS 0x6
 #        define PIND_ADDRESS 0x9
-#    elif defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__)
+#    elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
 #        define ADDRESS_BASE 0x00
 #        define PINA_ADDRESS 0x0
 #        define PINB_ADDRESS 0x3


@@ 307,7 307,7 @@
                 UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
                 sei();                              \
             } while (0)
-#    elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
+#    elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
 #        define SERIAL_UART_BAUD 115200
 #        define SERIAL_UART_DATA UDR1
 /* UBRR should result in ~16 and set UCSR1A = _BV(U2X1) as per rn42 documentation. HC05 needs baudrate configured accordingly */

@@ 40,6 40,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #if defined(PROTOCOL_CHIBIOS)
 #    define RESET QK_RESET
 #endif
+// Gross hack, remove me and change RESET keycode to QK_BOOT
+#if defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__)
+#    undef RESET
+#endif
 
 #include "quantum_keycodes.h"
 

@@ 280,7 280,7 @@ ifneq ($(findstring STM32F411, $(MCU)),)
   DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
 endif
 
-ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb1286))
+ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287))
   PROTOCOL = LUFA
 
   # Processor frequency.