M builddefs/mcu_selection.mk => builddefs/mcu_selection.mk +30 -1
@@ 540,10 540,39 @@ ifneq (,$(filter $(MCU),STM32L412 STM32L422))
UF2_FAMILY ?= STM32L4
endif
+ifneq ($(findstring WB32F3G71, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m3
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = WB32
+ MCU_SERIES = WB32F3G71xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= WB32F3G71x9
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= wb32f3g71xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_WB32_F3G71XX
+
+ USE_FPU ?= no
+endif
+
ifneq ($(findstring GD32VF103, $(MCU)),)
# RISC-V
MCU = risc-v
-
+
# RISC-V extensions and abi configuration
MCU_ARCH = rv32imac
MCU_ABI = ilp32
M data/schemas/keyboard.jsonschema => data/schemas/keyboard.jsonschema +2 -2
@@ 13,7 13,7 @@
},
"processor": {
"type": "string",
- "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66FX1M0", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F405", "STM32F407", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "STM32L412", "STM32L422", "STM32L433", "STM32L443", "GD32VF103", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"]
+ "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66FX1M0", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F405", "STM32F407", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "STM32L412", "STM32L422", "STM32L433", "STM32L443", "GD32VF103", "WB32F3G71", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"]
},
"audio": {
"type": "object",
@@ 57,7 57,7 @@
},
"bootloader": {
"type": "string",
- "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "gd32v-dfu", "unknown", "usbasploader", "USBasp", "tinyuf2"],
+ "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "gd32v-dfu", "wb32-dfu", "unknown", "usbasploader", "USBasp", "tinyuf2"],
},
"bootloader_instructions": {
"type": "string",
M docs/compatible_microcontrollers.md => docs/compatible_microcontrollers.md +4 -0
@@ 37,6 37,10 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s
* [STM32L422](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html)
* [STM32L433](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x3.html)
* [STM32L443](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x3.html)
+
+ ### WestBerryTech (WB32)
+
+ * [WB32F3G71xx](http://www.westberrytech.com)
### NXP (Kinetis)
M lib/python/qmk/constants.py => lib/python/qmk/constants.py +1 -1
@@ 13,7 13,7 @@ QMK_FIRMWARE_UPSTREAM = 'qmk/qmk_firmware'
MAX_KEYBOARD_SUBFOLDERS = 5
# Supported processor types
-CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66FX1M0', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F407', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474', 'STM32L412', 'STM32L422', 'STM32L433', 'STM32L443', 'GD32VF103'
+CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66FX1M0', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F407', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474', 'STM32L412', 'STM32L422', 'STM32L433', 'STM32L443', 'GD32VF103', 'WB32F3G71'
LUFA_PROCESSORS = 'at90usb162', 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None
VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85'
M lib/python/qmk/info.py => lib/python/qmk/info.py +2 -0
@@ 624,6 624,8 @@ def arm_processor_rules(info_data, rules):
if 'bootloader' not in info_data:
if 'STM32' in info_data['processor']:
info_data['bootloader'] = 'stm32-dfu'
+ elif 'WB32' in info_data['processor']:
+ info_data['bootloader'] = 'wb32-dfu'
else:
info_data['bootloader'] = 'unknown'
A platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c => platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c +82 -0
@@ 0,0 1,82 @@
+/*
+ Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void wb32_gpio_init(void) {
+
+#if WB32_HAS_GPIOA
+ rccEnableAPB1(RCC_APB1ENR_GPIOAEN);
+#endif
+
+#if WB32_HAS_GPIOB
+ rccEnableAPB1(RCC_APB1ENR_GPIOBEN);
+#endif
+
+#if WB32_HAS_GPIOC
+ rccEnableAPB1(RCC_APB1ENR_GPIOCEN);
+#endif
+
+#if WB32_HAS_GPIOD
+ rccEnableAPB1(RCC_APB1ENR_GPIODEN);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+ wb32_clock_init();
+ wb32_gpio_init();
+}
+/**
+ * @brief Board-specific initialization code.
+ * @note You can add your board-specific code here.
+ */
+void boardInit(void) {
+
+}
A platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.h => platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.h +56 -0
@@ 0,0 1,56 @@
+#pragma once
+/*
+ Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*
+ * Setup board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define WB32F3G71x9
+#if !defined(WB32F3G71xx)
+ #define WB32F3G71xx
+#endif
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */
A platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.mk => platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.mk +9 -0
@@ 0,0 1,9 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/board/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/board
+
+# Shared variables
+ALLCSRC += $(BOARDSRC)
+ALLINC += $(BOARDINC)
A platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h => platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h +12 -0
@@ 0,0 1,12 @@
+/* Address for jumping to bootloader on WB32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.westberrytech.com/down/mcu/data/WB32F3G71xx_rm.pdf
+ */
+#ifndef WB32_BOOTLOADER_ADDRESS
+# undef STM32_BOOTLOADER_ADDRESS
+# define WB32_BOOTLOADER_ADDRESS 0x1FFFE000
+# define STM32_BOOTLOADER_ADDRESS WB32_BOOTLOADER_ADDRESS
+#else
+# undef STM32_BOOTLOADER_ADDRESS
+# define STM32_BOOTLOADER_ADDRESS WB32_BOOTLOADER_ADDRESS
+#endif
A platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/chconf.h => platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/chconf.h +757 -0
@@ 0,0 1,757 @@
+/*
+ Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file rt/templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_1_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION 32
+#endif
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY 10000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA 0
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM TRUE
+#endif
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name OSLIB options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP TRUE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES TRUE
+#endif
+
+/**
+ * @brief Objects Caches APIs.
+ * @details If enabled then the objects caches APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_CACHES)
+#define CH_CFG_USE_OBJ_CACHES TRUE
+#endif
+
+/**
+ * @brief Delegate threads APIs.
+ * @details If enabled then the delegate threads APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_DELEGATES)
+#define CH_CFG_USE_DELEGATES TRUE
+#endif
+
+/**
+ * @brief Jobs Queues APIs.
+ * @details If enabled then the jobs queues APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_JOBS)
+#define CH_CFG_USE_JOBS TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS FALSE
+#endif
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS FALSE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
A platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/config.h => platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/config.h +20 -0
@@ 0,0 1,20 @@
+/* Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
+# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP FALSE
+#endif
A platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/halconf.h => platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/halconf.h +532 -0
@@ 0,0 1,532 @@
+/*
+ Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_1_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EFlash subsystem.
+ */
+#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__)
+#define HAL_USE_EFL FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/**
+ * @brief Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS FALSE // additional : The original is FALSE
+#endif
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE FALSE
+#endif
+
+/**
+ * @brief Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ * implementation for algorithms not supported by the underlying
+ * hardware.
+ * @note Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK FALSE
+#endif
+
+/**
+ * @brief Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS FALSE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING FALSE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/**
+ * @brief OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20 0x50FF8000U
+#endif
+
+/**
+ * @brief OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR 0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables circular transfers APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR FALSE
+#endif
+
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/**
+ * @brief Handling method for SPI CS line.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
A platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/mcuconf.h => platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/mcuconf.h +168 -0
@@ 0,0 1,168 @@
+/*
+ Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+#define WB32F3G71xx_MCUCONF TRUE
+
+/*
+ * WB32F3G71 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ */
+
+/**
+ * @name Internal clock sources
+ * @{
+ */
+#define WB32_HSECLK 12000000
+#define WB32_LSECLK 32768
+
+/*
+ * HAL driver system settings.
+ */
+#define WB32_NO_INIT FALSE
+#define WB32_MHSI_ENABLED TRUE
+#define WB32_FHSI_ENABLED FALSE
+#define WB32_LSI_ENABLED FALSE
+#define WB32_HSE_ENABLED TRUE
+#define WB32_LSE_ENABLED FALSE
+#define WB32_PLL_ENABLED TRUE
+#define WB32_MAINCLKSRC WB32_MAINCLKSRC_PLL
+#define WB32_PLLSRC WB32_PLLSRC_HSE
+#define WB32_PLLDIV_VALUE 2
+#define WB32_PLLMUL_VALUE 12 //The allowed range is 12,16,20,24.
+#define WB32_HPRE 1
+#define WB32_PPRE1 1
+#define WB32_PPRE2 1
+#define WB32_USBPRE WB32_USBPRE_DIV1P5
+
+/*
+ * EXTI driver system settings.
+ */
+#define WB32_IRQ_EXTI0_PRIORITY 6
+#define WB32_IRQ_EXTI1_PRIORITY 6
+#define WB32_IRQ_EXTI2_PRIORITY 6
+#define WB32_IRQ_EXTI3_PRIORITY 6
+#define WB32_IRQ_EXTI4_PRIORITY 6
+#define WB32_IRQ_EXTI5_9_PRIORITY 6
+#define WB32_IRQ_EXTI10_15_PRIORITY 6
+#define WB32_IRQ_EXTI16_PRIORITY 6
+#define WB32_IRQ_EXTI17_PRIORITY 6
+#define WB32_IRQ_EXTI18_PRIORITY 6
+#define WB32_IRQ_EXTI19_PRIORITY 6
+
+/*
+ * GPT driver system settings.
+ */
+#define WB32_TIM_MAX_CHANNELS 4
+#define WB32_GPT_USE_TIM1 FALSE
+#define WB32_GPT_USE_TIM2 FALSE
+#define WB32_GPT_USE_TIM3 FALSE
+#define WB32_GPT_USE_TIM4 FALSE
+#define WB32_GPT_TIM1_IRQ_PRIORITY 7
+#define WB32_GPT_TIM2_IRQ_PRIORITY 7
+#define WB32_GPT_TIM3_IRQ_PRIORITY 7
+#define WB32_GPT_TIM4_IRQ_PRIORITY 7
+
+/*
+ * ICU driver system settings.
+ */
+#define WB32_ICU_USE_TIM1 FALSE
+#define WB32_ICU_USE_TIM2 FALSE
+#define WB32_ICU_USE_TIM3 FALSE
+#define WB32_ICU_USE_TIM4 FALSE
+#define WB32_ICU_TIM1_IRQ_PRIORITY 7
+#define WB32_ICU_TIM2_IRQ_PRIORITY 7
+#define WB32_ICU_TIM3_IRQ_PRIORITY 7
+#define WB32_ICU_TIM4_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define WB32_PWM_USE_ADVANCED FALSE
+#define WB32_PWM_USE_TIM1 FALSE
+#define WB32_PWM_USE_TIM2 FALSE
+#define WB32_PWM_USE_TIM3 FALSE
+#define WB32_PWM_USE_TIM4 FALSE
+#define WB32_PWM_TIM1_IRQ_PRIORITY 7
+#define WB32_PWM_TIM2_IRQ_PRIORITY 7
+#define WB32_PWM_TIM3_IRQ_PRIORITY 7
+#define WB32_PWM_TIM4_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define WB32_I2C_USE_I2C1 FALSE
+#define WB32_I2C_USE_I2C2 FALSE
+#define WB32_I2C_BUSY_TIMEOUT 50
+#define WB32_I2C_I2C1_IRQ_PRIORITY 5
+#define WB32_I2C_I2C2_IRQ_PRIORITY 5
+
+/*
+ * SERIAL driver system settings.
+ */
+#define WB32_SERIAL_USE_UART1 FALSE
+#define WB32_SERIAL_USE_UART2 FALSE
+#define WB32_SERIAL_USE_UART3 FALSE
+#define WB32_SERIAL_USART1_PRIORITY 12
+#define WB32_SERIAL_USART2_PRIORITY 12
+#define WB32_SERIAL_USART3_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define WB32_SPI_USE_QSPI FALSE
+#define WB32_SPI_USE_SPIM2 FALSE
+#define WB32_SPI_USE_SPIS1 FALSE
+#define WB32_SPI_USE_SPIS2 FALSE
+#define WB32_SPI_QSPI_IRQ_PRIORITY 10
+#define WB32_SPI_SPIM2_IRQ_PRIORITY 10
+#define WB32_SPI_SPIS1_IRQ_PRIORITY 10
+#define WB32_SPI_SPIS2_IRQ_PRIORITY 10
+
+/*
+ * ST driver system settings.
+ */
+#define WB32_ST_IRQ_PRIORITY 8
+#define WB32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define WB32_UART_USE_UART1 FALSE
+#define WB32_UART_USE_UART2 FALSE
+#define WB32_UART_USE_UART3 FALSE
+#define WB32_UART_UART1_IRQ_PRIORITY 12
+#define WB32_UART_UART2_IRQ_PRIORITY 12
+#define WB32_UART_UART3_IRQ_PRIORITY 12
+
+/*
+ * USB driver system settings.
+ */
+#define WB32_USB_USE_USB1 TRUE
+#define WB32_USB_USB1_IRQ_PRIORITY 13
+#define WB32_USB_HOST_WAKEUP_DURATION 10
+
+
+#endif /* MCUCONF_H */
M platforms/chibios/chibios_config.h => platforms/chibios/chibios_config.h +12 -0
@@ 51,6 51,18 @@
# endif
#endif
+// WB32 compatibility
+#if defined(MCU_WB32)
+# define CPU_CLOCK WB32_MAINCLK
+
+# if defined(WB32F3G71xx)
+# define PAL_OUTPUT_TYPE_OPENDRAIN PAL_WB32_OTYPE_OPENDRAIN
+# define PAL_OUTPUT_TYPE_PUSHPULL PAL_WB32_OTYPE_PUSHPULL
+# define PAL_OUTPUT_SPEED_HIGHEST PAL_WB32_OSPEED_HIGH
+# define PAL_PUPDR_FLOATING PAL_WB32_PUPDR_FLOATING
+# endif
+#endif
+
#if defined(GD32VF103)
/* This chip has the same API as STM32F103, but uses different names for literally the same thing.
* As of 4.7.2021 QMK is tailored to use STM32 defines/names, for compatibility sake
M platforms/chibios/drivers/i2c_master.c => platforms/chibios/drivers/i2c_master.c +3 -0
@@ 38,6 38,9 @@ static const I2CConfig i2cconfig = {
I2C1_OPMODE,
I2C1_CLOCK_SPEED,
I2C1_DUTY_CYCLE,
+#elif defined(WB32F3G71xx)
+ I2C1_OPMODE,
+ I2C1_CLOCK_SPEED,
#else
// This configures the I2C clock to 400khz assuming a 72Mhz clock
// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
M platforms/chibios/drivers/spi_master.c => platforms/chibios/drivers/spi_master.c +33 -0
@@ 54,6 54,7 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
return false;
}
+#ifndef WB32F3G71xx
uint16_t roundedDivisor = 2;
while (roundedDivisor < divisor) {
roundedDivisor <<= 1;
@@ 62,6 63,7 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
if (roundedDivisor < 2 || roundedDivisor > 256) {
return false;
}
+#endif
#if defined(K20x) || defined(KL2x)
spiConfig.tar0 = SPIx_CTARn_FMSZ(7) | SPIx_CTARn_ASC(1);
@@ 135,6 137,37 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
}
spiConfig.cpr = (roundedDivisor - 1) >> 1;
+
+#elif defined(WB32F3G71xx)
+ if (!lsbFirst) {
+ osalDbgAssert(lsbFirst != FALSE, "unsupported lsbFirst");
+ }
+
+ if (divisor < 1) {
+ return false;
+ }
+
+ spiConfig.SPI_BaudRatePrescaler = (divisor << 2);
+
+ switch (mode) {
+ case 0:
+ spiConfig.SPI_CPHA = SPI_CPHA_1Edge;
+ spiConfig.SPI_CPOL = SPI_CPOL_Low;
+ break;
+ case 1:
+ spiConfig.SPI_CPHA = SPI_CPHA_2Edge;
+ spiConfig.SPI_CPOL = SPI_CPOL_Low;
+ break;
+ case 2:
+ spiConfig.SPI_CPHA = SPI_CPHA_1Edge;
+ spiConfig.SPI_CPOL = SPI_CPOL_High;
+ break;
+ case 3:
+ spiConfig.SPI_CPHA = SPI_CPHA_2Edge;
+ spiConfig.SPI_CPOL = SPI_CPOL_High;
+ break;
+ }
+
#else
spiConfig.cr1 = 0;
M platforms/chibios/drivers/uart.c => platforms/chibios/drivers/uart.c +4 -0
@@ 18,7 18,11 @@
#include "quantum.h"
+#if defined(WB32F3G71xx)
+static SerialConfig serialConfig = {SERIAL_DEFAULT_BITRATE, SD1_WRDLEN, SD1_STPBIT, SD1_PARITY, SD1_ATFLCT};
+#else
static SerialConfig serialConfig = {SERIAL_DEFAULT_BITRATE, SD1_CR1, SD1_CR2, SD1_CR3};
+#endif
void uart_init(uint32_t baud) {
static bool is_initialised = false;
M platforms/chibios/drivers/uart.h => platforms/chibios/drivers/uart.h +16 -0
@@ 68,6 68,22 @@
# define SD1_CR3 0
#endif
+#ifndef SD1_WRDLEN
+# define SD1_WRDLEN 3
+#endif
+
+#ifndef SD1_STPBIT
+# define SD1_STPBIT 0
+#endif
+
+#ifndef SD1_PARITY
+# define SD1_PARITY 0
+#endif
+
+#ifndef SD1_ATFLCT
+# define SD1_ATFLCT 0
+#endif
+
void uart_init(uint32_t baud);
void uart_write(uint8_t data);
M platforms/chibios/flash.mk => platforms/chibios/flash.mk +16 -0
@@ 23,6 23,20 @@ define EXEC_DFU_UTIL
$(DFU_UTIL) $(DFU_ARGS) -D $(BUILD_DIR)/$(TARGET).bin
endef
+
+define EXEC_WB32_DFU_UPDATER
+ if ! wb32-dfu-updater_cli -l | grep -q "Found DFU"; then \
+ printf "$(MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY)" ;\
+ sleep $(BOOTLOADER_RETRY_TIME) ;\
+ while ! wb32-dfu-updater_cli -l | grep -q "Found DFU"; do \
+ printf "." ;\
+ sleep $(BOOTLOADER_RETRY_TIME) ;\
+ done ;\
+ printf "\n" ;\
+ fi
+ wb32-dfu-updater_cli -D $(BUILD_DIR)/$(TARGET).bin
+endef
+
dfu-util: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter
$(call EXEC_DFU_UTIL)
@@ 82,6 96,8 @@ else ifeq ($(strip $(MCU_FAMILY)),MIMXRT1062)
$(UNSYNC_OUTPUT_CMD) && $(call EXEC_TEENSY)
else ifeq ($(strip $(MCU_FAMILY)),STM32)
$(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL)
+else ifeq ($(strip $(MCU_FAMILY)),WB32)
+ $(UNSYNC_OUTPUT_CMD) && $(call EXEC_WB32_DFU_UPDATER)
else ifeq ($(strip $(MCU_FAMILY)),GD32V)
$(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL)
else
M platforms/chibios/platform.mk => platforms/chibios/platform.mk +4 -0
@@ 141,6 141,10 @@ ifdef STM32_BOOTLOADER_ADDRESS
OPT_DEFS += -DSTM32_BOOTLOADER_ADDRESS=$(STM32_BOOTLOADER_ADDRESS)
endif
+ifdef WB32_BOOTLOADER_ADDRESS
+ OPT_DEFS += -DWB32_BOOTLOADER_ADDRESS=$(WB32_BOOTLOADER_ADDRESS)
+endif
+
# Work out if we need to set up the include for the bootloader definitions
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/bootloader_defs.h)","")
OPT_DEFS += -include $(KEYBOARD_PATH_5)/bootloader_defs.h