7 files changed, 8 insertions(+), 11 deletions(-)

M keyboards/tzarc/djinn/djinn_portscan_matrix.c
M keyboards/tzarc/djinn/djinn_usbpd.c
M keyboards/tzarc/djinn/keymaps/default/config.h
M keyboards/tzarc/djinn/keymaps/via/config.h
M keyboards/tzarc/ghoul/config.h
M keyboards/tzarc/ghoul/rev1/rp2040/config.h
M keyboards/tzarc/ghoul/rev1/stm32/config.h

@@ 114,4 114,4 @@ void matrix_wait_for_interrupt(void) {
         writePinHigh(col_pins[i]);
         setPinInputHigh(col_pins[i]);
     }
-}>
\ No newline at end of file
+}

@@ 25,4 25,4 @@ void usbpd_update(void) {
             kb_state.current_setting = allowance;
         }
     }
-}>
\ No newline at end of file
+}

@@ 3,7 3,7 @@
 #pragma once
 
 // Uncomment the following if your board uses 1.5A and 3.0A hold current fuses.
-//#define DJINN_SUPPORTS_3A_FUSE
+// #define DJINN_SUPPORTS_3A_FUSE
 
 // Encoder settings
 #define ENCODER_RESOLUTION 2


@@ 60,4 60,4 @@
 #define ENABLE_RGB_MATRIX_SPLASH
 #define ENABLE_RGB_MATRIX_MULTISPLASH
 #define ENABLE_RGB_MATRIX_SOLID_SPLASH
-#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH>
\ No newline at end of file
+#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH

@@ 3,7 3,7 @@
 #pragma once
 
 // Uncomment the following if your board uses 1.5A and 3.0A hold current fuses.
-//#define DJINN_SUPPORTS_3A_FUSE
+// #define DJINN_SUPPORTS_3A_FUSE
 
 // Encoder settings
 #define ENCODER_RESOLUTION 2


@@ 60,4 60,4 @@
 #define ENABLE_RGB_MATRIX_SPLASH
 #define ENABLE_RGB_MATRIX_MULTISPLASH
 #define ENABLE_RGB_MATRIX_SOLID_SPLASH
-#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH>
\ No newline at end of file
+#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH

@@ 2,11 2,10 @@
 // SPDX-License-Identifier: GPL-3.0-or-later
 #pragma once
 
-
 // Matrix
 #define MATRIX_SHIFT_REGISTER_COUNT 5
-//#define MATRIX_ROWS 6 // actually defined in info.json: 5 shift registers, plus one row for extras (i.e. encoder pushbutton read)
-//#define MATRIX_COLS 8 // actually defined in info.json: 8 bits per register
+// #define MATRIX_ROWS 6 // actually defined in info.json: 5 shift registers, plus one row for extras (i.e. encoder pushbutton read)
+// #define MATRIX_COLS 8 // actually defined in info.json: 8 bits per register
 
 // EEPROM configuration
 #define EXTERNAL_EEPROM_BYTE_COUNT 8192

@@ 2,7 2,6 @@
 // SPDX-License-Identifier: GPL-3.0-or-later
 #pragma once
 
-
 // Matrix configuration
 #define SPI_MATRIX_CHIP_SELECT_PIN GP21
 #define SPI_MATRIX_DIVISOR 16

@@ 2,7 2,6 @@
 // SPDX-License-Identifier: GPL-3.0-or-later
 #pragma once
 
-
 // Matrix configuration
 #define SPI_MATRIX_CHIP_SELECT_PIN C4
 #define SPI_MATRIX_DIVISOR 32