8 files changed, 137 insertions(+), 1 deletions(-)

A keyboards/2_milk/keymaps/mikethetiger/keymap.c
A keyboards/2_milk/keymaps/mikethetiger/readme.md
A keyboards/2_milk/keymaps/mikethetiger/rules.mk
M keyboards/2_milk/rules.mk
A keyboards/thevankeyboards/minivan/keymaps/mikethetiger/config.h
A keyboards/thevankeyboards/minivan/keymaps/mikethetiger/keymap.c
A keyboards/thevankeyboards/minivan/keymaps/mikethetiger/readme.md
A keyboards/thevankeyboards/minivan/keymaps/mikethetiger/rules.mk

@@ 0,0 1,8 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+      [0] = LAYOUT(
+          KC_VOLU,
+          KC_VOLD
+          )
+};

@@ 0,0 1,1 @@
+# mikethetiger's keymap for 2% Milk

@@ 0,0 1,13 @@
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE  = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE  = yes	# Console for debug(+400)
+COMMAND_ENABLE  = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE  = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE  = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE  = no  # Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE  = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE  = yes # This can be enabled if a ws2812 strip is connected to the expansion port.

@@ 1,4 1,4 @@
-# MCU name
+# MCU name
 MCU = atmega32u4
 
 # Processor frequency.

@@ 0,0 1,3 @@
+#pragma once
+
+// place overrides here

@@ 0,0 1,92 @@
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _QW 0
+#define _DV 1
+#define _CM 2
+#define _L1 3
+#define _L2 4
+#define _L3 5
+
+// Curly braces have their own keys. These are defined to make them not mess up
+// the grid in layer 2.
+#define L_CURBR LSFT(KC_LBRC)
+#define R_CURBR LSFT(KC_RBRC)
+
+enum custom_keycodes {
+  DVORAK = SAFE_RANGE,
+  QWERTY,
+  COLEMAK
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QW] = LAYOUT( /* Qwerty */
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, MO(_L1),
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2),
+    KC_LCTL, MO(_L2), KC_LGUI,                   KC_ENT,  KC_SPC,                    KC_RALT, KC_ESC,  TG(_L3)
+  ),
+  [_DV] = LAYOUT( /* Dvorak */
+    KC_TAB,  KC_SLSH, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+    MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    MO(_L1),
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    MO(_L2),
+    KC_LCTL, MO(_L2), KC_LGUI,                   KC_ENT,  KC_SPC,                    KC_RALT, KC_ESC,  TG(_L3)
+  ),
+  [_CM] = LAYOUT( /* Colemak */
+    KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+    MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    MO(_L1),
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2),
+    KC_LCTL, MO(_L2), KC_LGUI,                   KC_ENT,  KC_SPC,                    KC_RALT, KC_ESC,  TG(_L3)
+  ),
+  [_L1] = LAYOUT( /* LAYER 1 */
+    KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+    _______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______,
+    _______, KC_ESC,  _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT,
+    _______, KC_LGUI, _______,                   _______, _______,                   _______, _______, _______
+  ),
+  [_L2] = LAYOUT( /* LAYER 2 */
+    _______, QWERTY,  DVORAK,  COLEMAK, _______, _______, _______, KC_7,    KC_8,    KC_9,    KC_0,    _______,
+    KC_ESC,  KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, L_CURBR, R_CURBR, KC_4,    KC_5,    KC_6,    KC_VOLU, KC_ENT,
+    _______, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3,    KC_VOLD, _______,
+    _______, _______, _______,                   _______, _______,                   _______, _______, _______
+  ),
+  [_L3] = LAYOUT( /* LAYER 3 */
+    _______, _______, _______, _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   _______,
+    KC_ESC,  _______, _______, _______, _______, _______, _______, KC_F5,   KC_F6,   KC_F7,   KC_F8,   _______,
+    KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,
+    _______, KC_LSFT, KC_B,                      KC_SPC,  KC_C,                      _______, _______, _______
+  )
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+      switch(keycode) {
+        case DVORAK:
+          if (record->event.pressed) {
+            persistent_default_layer_set(1UL<<_DV);
+          }
+          return false;
+        case QWERTY:
+          if (record->event.pressed) {
+            persistent_default_layer_set(1UL<<_QW);
+          }
+          return false;
+        case COLEMAK:
+          if (record->event.pressed) {
+            persistent_default_layer_set(1UL<<_CM);
+          }
+          return false;
+        default:
+          return true;
+      }
+    return true;
+};

@@ 0,0 1,1 @@
+# mikethetiger's keymap for tv44<
\ No newline at end of file

@@ 0,0 1,18 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+