A keyboards/mechlovin/zed60/config.h => keyboards/mechlovin/zed60/config.h +86 -0
@@ 0,0 1,86 @@
+/*
+Copyright 2022 Mechlovin'
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4D4C
+#define PRODUCT_ID 0x0601
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Mechlovin Studio
+#define PRODUCT Zed60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B10, B2, B1, B0, A2 }
+#define MATRIX_COL_PINS { A10, A3, A9, A8, B15, B14, B13, B12, B5, B4, B3, A15, B7, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define LED_CAPS_LOCK_PIN A4
+
+#ifdef RGBLIGHT_ENABLE
+#define RGB_DI_PIN A7
+#define RGBLED_NUM 22
+#define RGBLIGHT_LIMIT_VAL 255
+
+#define WS2812_SPI SPID1 // default: SPID1
+#define WS2812_SPI_MOSI_PAL_MODE 5 // MOSI pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
+
+//#define RGB_DI_PIN E2
+//#ifdef RGB_DI_PIN
+# define RGBLIGHT_HUE_STEP 8
+# define RGBLIGHT_SAT_STEP 8
+# define RGBLIGHT_VAL_STEP 8
+# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+
+# define RGBLIGHT_EFFECT_BREATHING
+# define RGBLIGHT_EFFECT_RAINBOW_MOOD
+# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+# define RGBLIGHT_EFFECT_SNAKE
+# define RGBLIGHT_EFFECT_KNIGHT
+# define RGBLIGHT_EFFECT_CHRISTMAS
+# define RGBLIGHT_EFFECT_STATIC_GRADIENT
+# define RGBLIGHT_EFFECT_RGB_TEST
+# define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
A keyboards/mechlovin/zed60/halconf.h => keyboards/mechlovin/zed60/halconf.h +22 -0
@@ 0,0 1,22 @@
+/* Copyright 2022 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_SPI TRUE
+
+#include_next <halconf.h>
+
A keyboards/mechlovin/zed60/info.json => keyboards/mechlovin/zed60/info.json +150 -0
@@ 0,0 1,150 @@
+{
+ "keyboard_name": "Zed60",
+ "url": "",
+ "maintainer": "Mechlovin' Studio",
+ "layout_aliases": {
+ "LAYOUT_all": "LAYOUT_60_ansi_split_bs_rshift"
+ },
+ "layouts": {
+ "LAYOUT_60_ansi_split_bs_rshift": {
+ "layout": [
+ {"x": 0, "y": 0},
+ {"x": 1, "y": 0},
+ {"x": 2, "y": 0},
+ {"x": 3, "y": 0},
+ {"x": 4, "y": 0},
+ {"x": 5, "y": 0},
+ {"x": 6, "y": 0},
+ {"x": 7, "y": 0},
+ {"x": 8, "y": 0},
+ {"x": 9, "y": 0},
+ {"x": 10, "y": 0},
+ {"x": 11, "y": 0},
+ {"x": 12, "y": 0},
+ {"x": 13, "y": 0},
+ {"x": 14, "y": 0},
+
+ {"x": 0, "y": 1, "w": 1.5},
+ {"x": 1.5, "y": 1},
+ {"x": 2.5, "y": 1},
+ {"x": 3.5, "y": 1},
+ {"x": 4.5, "y": 1},
+ {"x": 5.5, "y": 1},
+ {"x": 6.5, "y": 1},
+ {"x": 7.5, "y": 1},
+ {"x": 8.5, "y": 1},
+ {"x": 9.5, "y": 1},
+ {"x": 10.5, "y": 1},
+ {"x": 11.5, "y": 1},
+ {"x": 12.5, "y": 1},
+ {"x": 13.5, "y": 1, "w": 1.5},
+
+ {"x": 0, "y": 2, "w": 1.75},
+ {"x": 1.75, "y": 2},
+ {"x": 2.75, "y": 2},
+ {"x": 3.75, "y": 2},
+ {"x": 4.75, "y": 2},
+ {"x": 5.75, "y": 2},
+ {"x": 6.75, "y": 2},
+ {"x": 7.75, "y": 2},
+ {"x": 8.75, "y": 2},
+ {"x": 9.75, "y": 2},
+ {"x": 10.75, "y": 2},
+ {"x": 11.75, "y": 2},
+ {"x": 12.75, "y": 2, "w": 2.25},
+
+ {"x": 0, "y": 3, "w": 2.25},
+ {"x": 2.25, "y": 3},
+ {"x": 3.25, "y": 3},
+ {"x": 4.25, "y": 3},
+ {"x": 5.25, "y": 3},
+ {"x": 6.25, "y": 3},
+ {"x": 7.25, "y": 3},
+ {"x": 8.25, "y": 3},
+ {"x": 9.25, "y": 3},
+ {"x": 10.25, "y": 3},
+ {"x": 11.25, "y": 3},
+ {"x": 12.25, "y": 3, "w": 1.75},
+ {"x": 14, "y": 3},
+
+ {"x": 0, "y": 4, "w": 1.25},
+ {"x": 1.25, "y": 4, "w": 1.25},
+ {"x": 2.5, "y": 4, "w": 1.25},
+ {"x": 3.75, "y": 4, "w": 6.25},
+ {"x": 10, "y": 4, "w": 1.25},
+ {"x": 11.25, "y": 4, "w": 1.25},
+ {"x": 12.5, "y": 4, "w": 1.25},
+ {"x": 13.75, "y": 4, "w": 1.25}
+ ]
+ },
+ "LAYOUT_60_ansi": {
+ "layout": [
+ {"x": 0, "y": 0},
+ {"x": 1, "y": 0},
+ {"x": 2, "y": 0},
+ {"x": 3, "y": 0},
+ {"x": 4, "y": 0},
+ {"x": 5, "y": 0},
+ {"x": 6, "y": 0},
+ {"x": 7, "y": 0},
+ {"x": 8, "y": 0},
+ {"x": 9, "y": 0},
+ {"x": 10, "y": 0},
+ {"x": 11, "y": 0},
+ {"x": 12, "y": 0},
+ {"x": 13, "y": 0, "w": 2},
+
+ {"x": 0, "y": 1, "w": 1.5},
+ {"x": 1.5, "y": 1},
+ {"x": 2.5, "y": 1},
+ {"x": 3.5, "y": 1},
+ {"x": 4.5, "y": 1},
+ {"x": 5.5, "y": 1},
+ {"x": 6.5, "y": 1},
+ {"x": 7.5, "y": 1},
+ {"x": 8.5, "y": 1},
+ {"x": 9.5, "y": 1},
+ {"x": 10.5, "y": 1},
+ {"x": 11.5, "y": 1},
+ {"x": 12.5, "y": 1},
+ {"x": 13.5, "y": 1, "w": 1.5},
+
+ {"x": 0, "y": 2, "w": 1.75},
+ {"x": 1.75, "y": 2},
+ {"x": 2.75, "y": 2},
+ {"x": 3.75, "y": 2},
+ {"x": 4.75, "y": 2},
+ {"x": 5.75, "y": 2},
+ {"x": 6.75, "y": 2},
+ {"x": 7.75, "y": 2},
+ {"x": 8.75, "y": 2},
+ {"x": 9.75, "y": 2},
+ {"x": 10.75, "y": 2},
+ {"x": 11.75, "y": 2},
+ {"x": 12.75, "y": 2, "w": 2.25},
+
+ {"x": 0, "y": 3, "w": 2.25},
+ {"x": 2.25, "y": 3},
+ {"x": 3.25, "y": 3},
+ {"x": 4.25, "y": 3},
+ {"x": 5.25, "y": 3},
+ {"x": 6.25, "y": 3},
+ {"x": 7.25, "y": 3},
+ {"x": 8.25, "y": 3},
+ {"x": 9.25, "y": 3},
+ {"x": 10.25, "y": 3},
+ {"x": 11.25, "y": 3},
+ {"x": 12.25, "y": 3, "w": 2.75},
+
+ {"x": 0, "y": 4, "w": 1.25},
+ {"x": 1.25, "y": 4, "w": 1.25},
+ {"x": 2.5, "y": 4, "w": 1.25},
+ {"x": 3.75, "y": 4, "w": 6.25},
+ {"x": 10, "y": 4, "w": 1.25},
+ {"x": 11.25, "y": 4, "w": 1.25},
+ {"x": 12.5, "y": 4, "w": 1.25},
+ {"x": 13.75, "y": 4, "w": 1.25}
+ ]
+ }
+ }
+}
A keyboards/mechlovin/zed60/keymaps/default/keymap.c => keyboards/mechlovin/zed60/keymaps/default/keymap.c +36 -0
@@ 0,0 1,36 @@
+/* Copyright 2022 Mechlovin'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define LT1_CAP LT(1, KC_CAPS)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ LT1_CAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, TO(1),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL
+ ),
+ [1] = LAYOUT_60_ansi_split_bs_rshift(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PENT,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_P1, KC_P2, KC_P3, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+};
A keyboards/mechlovin/zed60/keymaps/default/readme.md => keyboards/mechlovin/zed60/keymaps/default/readme.md +1 -0
@@ 0,0 1,1 @@
+# The default keymap for Zed60
A keyboards/mechlovin/zed60/keymaps/via/keymap.c => keyboards/mechlovin/zed60/keymaps/via/keymap.c +50 -0
@@ 0,0 1,50 @@
+/* Copyright 2022 Mechlovin'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define LT1_CAP LT(1, KC_CAPS)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ LT1_CAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, TO(1),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL
+ ),
+ [1] = LAYOUT_60_ansi_split_bs_rshift(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PENT,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_P1, KC_P2, KC_P3, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [2] = LAYOUT_60_ansi_split_bs_rshift(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [3] = LAYOUT_60_ansi_split_bs_rshift(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+};
A keyboards/mechlovin/zed60/keymaps/via/readme.md => keyboards/mechlovin/zed60/keymaps/via/readme.md +1 -0
@@ 0,0 1,1 @@
+# The VIA keymap for Zed60
A keyboards/mechlovin/zed60/keymaps/via/rules.mk => keyboards/mechlovin/zed60/keymaps/via/rules.mk +1 -0
@@ 0,0 1,1 @@
+VIA_ENABLE = yes<
\ No newline at end of file
A keyboards/mechlovin/zed60/mcuconf.h => keyboards/mechlovin/zed60/mcuconf.h +23 -0
@@ 0,0 1,23 @@
+/* Copyright 2022 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
A keyboards/mechlovin/zed60/readme.md => keyboards/mechlovin/zed60/readme.md +27 -0
@@ 0,0 1,27 @@
+# zed60
+
+
+
+Zed60 PCB, 60% keyboard PCB.
+* Keyboard Maintainer: [Mechlovin'](https://mechlovin.studio)
+* Hardware Supported: Kay60, APM32F103
+* Hardware Availability: [Mechlovin'](https://mechlovin.studio)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make mechlovin/zed60:default
+
+Flashing example for this keyboard:
+
+ make mechlovin/zed60:default:flash
+
+## Bootloader
+
+Enter the bootloader in 4 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Bootloader**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
A keyboards/mechlovin/zed60/rules.mk => keyboards/mechlovin/zed60/rules.mk +20 -0
@@ 0,0 1,20 @@
+# MCU name
+MCU = STM32F103
+
+# Bootloader selection
+BOOTLOADER = stm32duino
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+WS2812_DRIVER = spi
A keyboards/mechlovin/zed60/zed60.c => keyboards/mechlovin/zed60/zed60.c +17 -0
@@ 0,0 1,17 @@
+/* Copyright 2022 Mechlovin' Studio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "zed60.h"
A keyboards/mechlovin/zed60/zed60.h => keyboards/mechlovin/zed60/zed60.h +66 -0
@@ 0,0 1,66 @@
+/* Copyright 2022 Mechlovin'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+#define XXX KC_NO
+
+/*
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │2C │ │0D │ 2u Backspace
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ └───────┘
+ * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2D │
+ ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌──────────┐
+ │30 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │ │3C │ 2.75u RShift
+ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤ └──────────┘
+ * │40 │41 │42 │46 │4A │4B │4C │4D │ Standard
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐
+ * │40 │41 │42 │46 │4B │4C │4D │ Tsangan/WKL
+ * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
+ */
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2C, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K40, K41, K42, K46, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+ { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }, \
+}
+
+#define LAYOUT_60_ansi( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+ K40, K41, K42, K46, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D }, \
+ { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX }, \
+ { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }, \
+}
+