M builddefs/mcu_selection.mk => builddefs/mcu_selection.mk +40 -0
@@ 143,6 143,9 @@ ifneq ($(findstring STM32F042, $(MCU)),)
# This ensures that the EEPROM page buffer fits into RAM
USE_PROCESS_STACKSIZE = 0x600
USE_EXCEPTIONS_STACKSIZE = 0x300
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC400
endif
ifneq ($(findstring STM32F072, $(MCU)),)
@@ 175,6 178,9 @@ ifneq ($(findstring STM32F072, $(MCU)),)
# UF2 settings
UF2_FAMILY ?= STM32F0
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC800
endif
ifneq ($(findstring STM32F103, $(MCU)),)
@@ 239,6 245,9 @@ ifneq ($(findstring STM32F303, $(MCU)),)
# UF2 settings
UF2_FAMILY ?= STM32F3
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFFD800
endif
ifneq ($(findstring STM32F401, $(MCU)),)
@@ 276,6 285,9 @@ ifneq ($(findstring STM32F401, $(MCU)),)
# UF2 settings
UF2_FAMILY ?= STM32F4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
endif
ifneq ($(findstring STM32F405, $(MCU)),)
@@ 308,6 320,9 @@ ifneq ($(findstring STM32F405, $(MCU)),)
# UF2 settings
UF2_FAMILY ?= STM32F4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
endif
ifneq ($(findstring STM32F407, $(MCU)),)
@@ 340,6 355,9 @@ ifneq ($(findstring STM32F407, $(MCU)),)
# UF2 settings
UF2_FAMILY ?= STM32F4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
endif
ifneq ($(findstring STM32F411, $(MCU)),)
@@ 377,6 395,9 @@ ifneq ($(findstring STM32F411, $(MCU)),)
# UF2 settings
UF2_FAMILY ?= STM32F4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
endif
ifneq ($(findstring STM32F446, $(MCU)),)
@@ 406,6 427,9 @@ ifneq ($(findstring STM32F446, $(MCU)),)
BOARD ?= GENERIC_STM32_F446XE
USE_FPU ?= yes
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
endif
ifneq ($(findstring STM32G431, $(MCU)),)
@@ 438,6 462,9 @@ ifneq ($(findstring STM32G431, $(MCU)),)
# UF2 settings
UF2_FAMILY ?= STM32G4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
endif
ifneq ($(findstring STM32G474, $(MCU)),)
@@ 470,6 497,9 @@ ifneq ($(findstring STM32G474, $(MCU)),)
# UF2 settings
UF2_FAMILY ?= STM32G4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
endif
ifneq (,$(filter $(MCU),STM32L433 STM32L443))
@@ 504,6 534,9 @@ ifneq (,$(filter $(MCU),STM32L433 STM32L443))
# UF2 settings
UF2_FAMILY ?= STM32L4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
endif
ifneq (,$(filter $(MCU),STM32L412 STM32L422))
@@ 538,6 571,9 @@ ifneq (,$(filter $(MCU),STM32L412 STM32L422))
# UF2 settings
UF2_FAMILY ?= STM32L4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
endif
ifneq ($(findstring WB32F3G71, $(MCU)),)
@@ 567,6 603,10 @@ ifneq ($(findstring WB32F3G71, $(MCU)),)
BOARD ?= GENERIC_WB32_F3G71XX
USE_FPU ?= no
+
+ # Bootloader address for WB32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFFE000
+ WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000
endif
ifneq ($(findstring GD32VF103, $(MCU)),)
M docs/platformdev_chibios_earlyinit.md => docs/platformdev_chibios_earlyinit.md +0 -1
@@ 17,7 17,6 @@ As such, if you wish to override this API consider limiting use to writing to lo
| `config.h` override | Description | Default |
|-----------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|----------|
| `#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP` | Whether or not bootloader is to be executed during the early initialisation code of QMK. | `FALSE` |
-| `#define STM32_BOOTLOADER_ADDRESS` | Relevant for single-bank STM32 MCUs, signifies the memory address to jump to bootloader. Consult [AN2606](https://www.st.com/content/st_com/en/search.html#q=an2606-t=resources-page=1) for the _System Memory_ address for your MCU. This value should be of the format `0x11111111`. | `<none>` |
| `#define STM32_BOOTLOADER_DUAL_BANK` | Relevant for dual-bank STM32 MCUs, signifies that a GPIO is to be toggled in order to enter bootloader mode. | `FALSE` |
| `#define STM32_BOOTLOADER_DUAL_BANK_GPIO` | Relevant for dual-bank STM32 MCUs, the pin to toggle when attempting to enter bootloader mode, e.g. `B8` | `<none>` |
| `#define STM32_BOOTLOADER_DUAL_BANK_POLARITY` | Relevant for dual-bank STM32 MCUs, the value to set the pin to in order to trigger charging of the RC circuit. e.g. `0` or `1`. | `0` |
D keyboards/durgod/boards/DURGOD_STM32_F070/bootloader_defs.h => keyboards/durgod/boards/DURGOD_STM32_F070/bootloader_defs.h +0 -7
@@ 1,7 0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
M keyboards/durgod/dgk6x/rules.mk => keyboards/durgod/dgk6x/rules.mk +3 -1
@@ 1,9 1,11 @@
# MCU name
# Actually F070, but close enough
MCU = STM32F072
-
BOARD = DURGOD_STM32_F070
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
# Do not put the microcontroller into power saving mode
NO_SUSPEND_POWER_DOWN = yes
M keyboards/ergodox_stm32/rules.mk => keyboards/ergodox_stm32/rules.mk +0 -4
@@ 1,12 1,8 @@
# MCU name
MCU = STM32F103
-
MCU_LDSCRIPT = stm32f103_bootloader
BOARD = ST_NUCLEO64_F103RB
-CFLAGS += "-Wno-error=deprecated"
-EXTRAFLAGS = -O0 -g
-
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
M keyboards/matrix/abelx/boards/abelx_bd/board.c => keyboards/matrix/abelx/boards/abelx_bd/board.c +0 -3
@@ 208,9 208,6 @@ static void stm32_gpio_init(void) {
* else.
*/
void __early_init(void) {
- extern void enter_bootloader_mode_if_requested(void);
- enter_bootloader_mode_if_requested();
-
stm32_gpio_init();
stm32_clock_init();
}
D keyboards/matrix/abelx/bootloader_defs.h => keyboards/matrix/abelx/bootloader_defs.h +0 -7
@@ 1,7 0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
M keyboards/matrix/abelx/rules.mk => keyboards/matrix/abelx/rules.mk +0 -8
@@ 25,14 25,6 @@ ARMV = 7
USE_FPU = yes
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-#DFU_SUFFIX_ARGS = -p DF11 -v 0483
-
# Build Options
# change yes to no to disable
#
D keyboards/matrix/m20add/bootloader_defs.h => keyboards/matrix/m20add/bootloader_defs.h +0 -5
@@ 1,5 0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
D keyboards/matrix/noah/bootloader_defs.h => keyboards/matrix/noah/bootloader_defs.h +0 -5
@@ 1,5 0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
M keyboards/mechmini/v1/rules.mk => keyboards/mechmini/v1/rules.mk +1 -1
@@ 2,7 2,7 @@
MCU = atmega32a
# Bootloader selection
-BOOTLOADER = atmel-dfu
+BOOTLOADER = bootloadhid
# Build Options
# change yes to no to disable
M keyboards/mode/m65s/rules.mk => keyboards/mode/m65s/rules.mk +4 -1
@@ 1,6 1,9 @@
# MCU name
MCU = STM32F401
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
# Build Options
# change yes to no to disable
#
@@ 14,6 17,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
EEPROM_DRIVER = i2c
+
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE
-STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
M lib/python/qmk/info.py => lib/python/qmk/info.py +1 -6
@@ 622,12 622,7 @@ def arm_processor_rules(info_data, rules):
info_data['protocol'] = 'ChibiOS'
if 'bootloader' not in info_data:
- if 'STM32' in info_data['processor']:
- info_data['bootloader'] = 'stm32-dfu'
- elif 'WB32' in info_data['processor']:
- info_data['bootloader'] = 'wb32-dfu'
- else:
- info_data['bootloader'] = 'unknown'
+ info_data['bootloader'] = 'unknown'
if 'STM32' in info_data['processor']:
info_data['platform'] = 'STM32'
D platforms/chibios/boards/BLACKPILL_STM32_F401/configs/bootloader_defs.h => platforms/chibios/boards/BLACKPILL_STM32_F401/configs/bootloader_defs.h +0 -5
@@ 1,5 0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
D platforms/chibios/boards/BLACKPILL_STM32_F411/configs/bootloader_defs.h => platforms/chibios/boards/BLACKPILL_STM32_F411/configs/bootloader_defs.h +0 -5
@@ 1,5 0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
D platforms/chibios/boards/GENERIC_STM32_F042X6/configs/bootloader_defs.h => platforms/chibios/boards/GENERIC_STM32_F042X6/configs/bootloader_defs.h +0 -5
@@ 1,5 0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC400
D platforms/chibios/boards/GENERIC_STM32_F072XB/configs/bootloader_defs.h => platforms/chibios/boards/GENERIC_STM32_F072XB/configs/bootloader_defs.h +0 -5
@@ 1,5 0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
D platforms/chibios/boards/GENERIC_STM32_F303XC/configs/bootloader_defs.h => platforms/chibios/boards/GENERIC_STM32_F303XC/configs/bootloader_defs.h +0 -5
@@ 1,5 0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
M platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h => platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h +1 -1
@@ 17,7 17,7 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
*/
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
+
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
#endif
M platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h => platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h +1 -1
@@ 17,7 17,7 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
*/
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
+
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
#endif
M platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h => platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h +1 -1
@@ 17,7 17,7 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
*/
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
+
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
#endif
D platforms/chibios/boards/GENERIC_STM32_G431XB/configs/config.h => platforms/chibios/boards/GENERIC_STM32_G431XB/configs/config.h +0 -23
@@ 1,23 0,0 @@
-/* Copyright 2018-2020 Nick Brassel (@tzarc)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
M platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h => platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h +0 -1
@@ 17,7 17,6 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
*/
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH
M platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h => platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h +0 -1
@@ 17,7 17,6 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
*/
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH
D platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h => platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h +0 -12
@@ 1,12 0,0 @@
-/* Address for jumping to bootloader on WB32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.westberrytech.com/down/mcu/data/WB32F3G71xx_rm.pdf
- */
-#ifndef WB32_BOOTLOADER_ADDRESS
-# undef STM32_BOOTLOADER_ADDRESS
-# define WB32_BOOTLOADER_ADDRESS 0x1FFFE000
-# define STM32_BOOTLOADER_ADDRESS WB32_BOOTLOADER_ADDRESS
-#else
-# undef STM32_BOOTLOADER_ADDRESS
-# define STM32_BOOTLOADER_ADDRESS WB32_BOOTLOADER_ADDRESS
-#endif
D platforms/chibios/boards/QMK_PROTON_C/configs/bootloader_defs.h => platforms/chibios/boards/QMK_PROTON_C/configs/bootloader_defs.h +0 -7
@@ 1,7 0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
M platforms/chibios/bootloaders/gd32v_dfu.c => platforms/chibios/bootloaders/gd32v_dfu.c +1 -0
@@ 17,6 17,7 @@
#include "bootloader.h"
#include <ch.h>
+#include <hal.h>
#define DBGMCU_KEY_UNLOCK 0x4B5A6978
#define DBGMCU_CMD_RESET 0x1